Legions of the Netherforge - Warstrider with Voltamaton

For now, this is the final addition to my Netherforge army, at least on new type units.

This is a new hero type unit, the Warstrider with Voltamaton, which is quite simply a Warstrider with a Voltamaton riding atop it, sort of a monster hero option for the Netherforge. I did some obvious modifications to the Warstrider by giving it some noticeable electric gadgets to facilitate the Voltamaton that's buffing it.

For now, I have no plans to print anything additional for this army, as I will be concentrating on getting a few more playtests in and finishing up the battletome, which is coming along really well.

Printing some AoS Terrain

I am now preparing some minis photos for my Netherforge battletome, so I needed some terrain for use at home. Then I realized "Hey! I have a 3D printer!"

I printed these designs because they make for quick prints that uses very little filament. Everything on the table there (except my Lord-Celestant of course) was printed on less than a single spool of $20 filament. I liked the original painting he did on his designs, and wanted to duplicate that, luckily good ol' Duncan did something similar.

However I did my painting a little different:

• Prime matte black
• heavy drybrush Kabalite Green
• drybrush Sybarite Green
• base Balthasar Gold on metal parts
• wash Agrax Earthshade on metal parts
• light drybrush allover with Screaming Skull
• finally wash and a wipe off with the watered down Mournfang brown method (see video)

Legions of the Netherforge - 3D printed AoS army Part 2

I finished painting my Netherforge army. I got a pretty simple and easy painting method. Some of them were painted as per my previous post. I do like that there is little variety in painting, which makes sense for an army literally made on automated assembly lines.

Furnacelord Simulacrums

Bombardiers

Siegematon Director and Diggermines

Siegematon Tunneler

Netherforge Gunners

Warstrider

Siege Maul

Vaulthammer

Tunnel Caber

Great Horn

Brawlstriders

Also, I was able to get a game in with these guys against my brother's Destruction. It was a good thing because I have adjusted a lot of the rules I had written for these guys, as well as come up with some tenuous points values for matched play. I will try to get a couple more games in against a few more guys before I finalize the Battletome.

Legions of the Netherforge - 3D printed AoS army

The Netherforge burns eternally somewhere deep in Chamon. Machines making machines, all according to the designs of their long dead designer, progenitor, and creator. A duardin known only as the Furnacelord.

The Legions of the Netherforge is a homebrew Chaos army I am building for Age of Sigmar. I had found this collection of designs on Thingiverse by a very talented 3D modeler, Arian "Dutchmogul" Croft at Illgottengames. The entire range of models he designed captured my imagination. It was all low detail, designed for 3D printing, and I think actually looks very cool. I knew I had to make an army out of these guys.

So I downloaded the models, edited them a little in Tinkercad (mostly to prepare some alternate poses and weapon options, make their feet a little bigger, and removing their bases so I could do my own). I thought about what I could run this army as, but no ideas really satisfied me. So I am making their rules from the ground up. This way I can design some cool rules that I feel reflect the feel and style of the army. This also involves making a story for them (teased above) and changing the names of the models to fit the story.

The first 2 models are the Furnacelord Simulacrum, the leaders of the Netherforge armies. Built personally by the Furnacelord and gifted with more intelligent cogminds. They used some of the same parts as other models, but sized up about 20% to stand out in the army. The last model is a Bombardier, a minor hero that improves the range capabilities of the army.

These are the Siegematon units, those responsible for mapping and making the major tunnel systems the Legions use to get around the mortal realms. The 4 small ones are Diggermines, explosive little tunnelers. The next is the Siegematon Director, a commander of sorts for the Siegematon units, and last is the Siegematon Tunneler, a hero unit that brings other units on to the battlefield through tunneling, and is formidable in combat as well.

Here is where you see the paintjob I plan for the army. I wanted to go for the steampunk brass look which I think works well. these are the Warriors, just the most basic battleline troop unit for the army. There are 2 weapon variants: Axes and shields (left) and hammers and shields (right).

More elite troops, the Guardians (left) are tasked with protecting the leaders of the army and guarding the hidden entrance to the Netherforge, and the Berzerkers (right) are just a melee focused unit that can either dual wield axes, hammers, or digging claws (as shown).

The Gunners are a small unit with a mid-range and hard hitting firepower, using what we would know now as a radioactive material for their guns for an extra effect. They rest the heavy guns on shields with wheels for added protection and stability.

The first unit is the Tunnel Caber, a slow moving deathroller, and on the right is the Great Horn. A piece of terrain that has a beneficial effect for the army when used.

Now on to the war machines for the army. The first is the Vaulthammer, a heavy cannon that shoots a devastating radioactive cannonball. Then is the Siege Maul. I wanted to experiment with making rules for a melee focused war machine. We will see how it turns out. I love the look of the model though.

These are the Construct units. The story for them is after the passing of the Furnacelord, the Netherforge continued to innovate and create new additions to the legion. The Construct units are signs of that. The big one is the Warstrider, a big lumbering behemoth that has some unique rules for dealing with units inside fortifications. The smaller ones are the Brawlstriders, just a melee focused unit with a risk/reward system in combat.

Finally for an original unit of my own design (using some existing parts as base, of course). This is the Voltamaton. I noticed the army had a lack of pizzaz in the form of magic or supernatural. So I thought of a hero that utilized an electric generator in different ways, so I designed the parts to make a sort of priest rather than a wizard.

I'm looking forward to finish painting these guys and get some games in. I will show of the rules for them I have designed and some more lore in a later post, as well as the battletome when I get it finished.

Canwalks - 3D printed sci-fi terrain system

Onto some cool scifi terrain.

I found these files on Thingiverse and gave them a go. The original designs are credited to Prometheum Forge which makes MDF terrain, and then some 3D printed equivalents were uploaded. Liking this a lot, because the prints used little filament and were fairly quick to do, I started to design some of my own walkways and platforms to go along with them, so I can get a table full of Necromunda/forgeword/factory scifi terrain.

First I designed these little catwalks to connect the can-tanks. They are meant to reach the height to the tops of the tanks that lay on their sides, and are about 50mm wide to give players plenty of room for minis. 25/32/40mm bases should fit comfortably on them.

Next I made some platforms with ladders for more features. The idea is to get these to stack high, making the Necromunda type effect, but I am struggling with that concept right now. Needs further tinkering with the files.

I tried making a big quad-vertical tank system that could stack, but this patter was fairly finicky. I may need to alter the patterns further.

Here is all of it put together for a view of what I have so far. More to come of course. This type of terrain favors skirmish gaming over the mass battles, but I think without the catwalks it could be versatile.

I am still working on the file designs at the moment, but when I think I have them down pretty good, I will upload them to my account on Thingiverse.

That's still not all I have been doing with my printer, the big project I have been printing is an entire AoS army. That's right, I have printed a whole army. And I will get some more into that in a later post. Here's a preview image:

My journey into 3D printing, a second time

If any of you have seen or followed my old blog, of which I rarely do anything on nowadays, back in 2014 I had a few posts of excitement over accruing a 3D printer. It was purely intended for my hobby, with the intent of mostly making terrain and some other useful things. I had some plans for some simple minis, but knew I wasn't going to get any real good detail out of it.

That experience was a disaster. I constantly tinkered on it, multiple calibrations, etc. What started at first as an exciting foray into a potentially cool venture, turned into a disappointing discouraging experience. I got maybe one decent print out of all of it and a lot of failures. With a little bit of anger, I decided to cut my losses and sell the printer a few months after I got it.

That was back in 2014, and I decided to retry it a month ago. After much research, mostly on YouTube and various other review sites I got some encouragement. I had looked into a lot of models, but finally decided on the Creality Ender 3, and the big reason was because of this video.

So I got mine, and with a little assembly, I had it running and giving me a near perfect first print. I was ecstatic. So for the last month or so I have been running this thing constantly, with little to no issues and very few failed prints. This is like a dream.

So a couple things, I did a lot of research. I watched hours of videos, mostly on using and maintaining a 3D printer. I recognize now several things I did wrong back in 2014 with that printer, and I could have probably gotten it working with what I know now. But the other big factor is it has been 4 years, and the technology only got cheaper and better. Newer printers, even the chinese ones, are much better than those old machines. And that printer back then was about $800 when I got it, and this Ender 3 cost me about $240 on Amazon.

So on to some prints, shall we?

I designed this using a simple online 3D design program called Tinkercad. I consider it the MSPaint of 3D modeling software, which is perfect for me, and it's good enough for my use. I found a rock pile file on Thingiverse.com, which is a great repository for free models for printing. Definitely a recommend resource for anyone wanting to get into 3D printing. So I found the rock pile, and using Tinkercad I cut in the recesses and added the 2 little dice trays. The big dice I can use for tracking the turn in 40k, the big bowl I mainly used for command points which I track with beads, the small dice I can use for victory points, or even tracking the turns in AoS. Whatever, I want really. It's a useful command tray for holding whatever I need in games. And it fits in my game tools bag, along with the dice, tape measure, etc.

Here it is painted up. I tried to go for a similar paint style that GW uses on their Warscryer Citadel, I really like that Azyrite meteor look, but after it was all done, it just looks like a stained wood, which works good too. I finished it off with a couple coats of a spray on gloss coat to give it some toughness.

I recently got the Castle Panic board game from a friend. Wonderful game, a great time for any boardgamer. Then I thought I would add some 3D printing flair to it:

I went ahead and printed a wizard tower for use as I plan on picking that expansion up anyway.

Now that is not all I have been printing. I also printed a couple toys for my girls, some parts for the printer itself, and Jarom had me commission him some preliminary parts for some projects he has planned. I have a couple more posts coming with cool stuff I have made.