Launchings

Launching Renetta, Rooster # 746, at the first annual Rooster Week, in 2014.

My grandparents lived on a river in southern Alabama when I was growing up and my father taught me to row when I was maybe 6 or 7 years old. I did my first solo row in front of my grandparents' wharf at that young age.

When Andy Bradbury started building the Cartopper dinghy on his patio, he promised his wife it would only take a couple of months for him to finish. Just short of two years after that, he finally launched the 11′ 6″ WREN in his home waters of the Pamilico River Washington, North Carolina.

Willy Hampton says the homeport for his new modified Rozinante yawl is Earth, but he sails out of Portsmouth, Rhode Island. Doug Hylan (www.dhylanboats.com) reworked the L.F.

Blanket Bay was built for my granddaughter, born today, May 27th. I wanted a design that got the cradle up off the floor (my daughter has three little dogs) and this design fit the bill. It’s clinker built of 1088 Hydratec Meranti ply, with solid Maple gunwales.

Steve Miller launched this Swifty 12 designed by Fred Shell (www.shellboats.com) on May 27, 2001. She is 12' long with 5'3" beam. Steve named her SURPRISE and provided her with a sprit rig. He sails her on the lakes around Portland, OR.

Using just materials from his local home improvement store, Robert B. Holt built this flat-bottomed, double-ended rowing boat to his own design. He used 5/16" tongue and groove western cedar paneling for the planking, and 1x3 strips for the frames and floors.

FRANNY is David Sharp's first wooden boat effort. She is 11' long with a 59' beam. He constructed her using marine plywood epoxied to fore-and-aft stringers with mahogany seats. He launched FRANNY in August of 2001 and uses her on the waters of Green Bay, NS, and Ottawa, ON.

My name is Jessy Hintz from Louisville, CO. In the spring of 2020 my neighbor acquired a 16 foot unfinished cedar striped canoe hull of unknown design. The original outer fiberglass sheeting did not adhere.