AI-native CAD

Design. Verify. Build.

Describe the part you need. Tau builds it as editable parametric CAD, checks the geometry against your requirements and exports STEP, STL or 3MF for machining and 3D printing.

Using Claude Code or Codex? Paste this into your agent:

Install the Tau plugin from https://tau.new/llms.txt
Object 001 — Planetary gearbox34 parts · Replicad
A planetary gearbox rendered from Tau’s authored CAD example: a fixed ring gear, three planet gears around a sun gear, and a blue output carrier held by three socket screws
Input 0° → Output 0.0° · 4:1Rendered from the authored CAD source

01 design

Describe the part.

Tell the agent what the part does and where it fits, or write the code yourself. You get parametric source with dimensions you control.

Your idea → editable CAD

02 verify

Check the geometry.

Declare the dimensions, clearances and hole patterns the part needs. GeoSpec checks the geometry against them and flags anything it cannot measure.

Dimensions · clearances · fit

03 build

Export and make it.

Export STEP for machining, or STL and 3MF for 3D printing. Keep the source so you can revise the part after testing it.

Machine · print · assemble

Example

Designing a
planetary gearbox.

A 4:1 planetary gearbox from Tau’s example library: 34 named parts, three planets, a sun gear and socket-head screws. Scroll through the design, assembly, geometry checks and export.

01 / 09 · IdeaPlanetary gearbox · 4:1
The assembled planetary gearbox from Tau’s authored example
Authored Tau example · rendered from source
  1. 01 Idea

    Start with the requirements.

    The gearbox needs a 4:1 reduction, has to fit inside a 174 mm rim and fastens with M3 socket-head screws.

    4:1 reduction · 174 mm rim · M3 socket screws

  2. 02 Prompt

    Describe it to the agent.

    Describe the mechanism in plain language. Tau breaks the request into a plan of named parts.

    “Create a planetary gearbox with a 4:1 reduction, three planets and socket screws on top.”

  3. 03 Parts

    One task per part.

    The ring gear, the gear train and the carrier hardware are built as separate named parts. Each one is parametric source you can open and edit.

    Ring gear · Gear train · Carrier & hardware

    Illustration of a design session

  4. 04 Geometry

    Source becomes solids.

    Each part’s source evaluates to a solid. Teeth, pins, bushings and fasteners all derive from the same shared parameters.

    34 solids · 24 / 24 / 72 teeth

  5. 05 Assembly

    Assemble it.

    Carrier, pins and bearings first; planets, sun and ring next; the output carrier and its screws last. One turn of the sun moves the carrier a quarter turn.

    Fixed ring · sun input · carrier output · 4:1

  6. 06 Parameter

    Change a parameter.

    Widen the gears from 14 to 18 mm. The ring, pins, bushings and hardware follow the source, and the axial envelope grows from 68 to 72 mm.

    faceWidth 14 → 18 · inputAngle 0° → 30°

  7. 07 Evidence

    Check the requirements.

    The example declares ten GeoSpec requirements. Anything GeoSpec cannot measure yet is reported as inconclusive, not as a pass.

    • has the specified 174 mm rim and 68 mm axial envelopePassed
    • contains closed manufactured solidsPassed
    • contains the gears, two carriers and all support hardwareInconclusive
    • places the three planet axes on a 96 mm pitch circleInconclusive
    • has no gear or hardware interferenceInconclusive
    • preserves clearance with a wider face and advanced input angleInconclusive
    • dimensions the removable bearing and thrust hardwareInconclusive
    • clears intermediate tooth contact phasesInconclusive
    • provides valid millimetre BRep solidsPassed
    • has the mounting pattern and cylindrical shaft and bearing interfacesInconclusive

    Recorded 2 October 2026 with the GeoSpec engine CLI on the authored example (model SHA-256 464caa7c…), 18.7 s. Inconclusive means the check needs evidence GeoSpec does not measure yet; it is not a pass. Geometric checks do not certify strength or manufacturing readiness.

    Recorded GeoSpec run

  8. 08 Make

    Export it.

    Export STEP for machining, or a mesh for a slicer. This example places the ring gear on a 256 mm print bed.

    3D printing illustration · no job is sent

  9. 09 Anywhere

    Open it on any computer.

    Back the project up to Tau Cloud and open it wherever you sign in, with its files, its revision history and, unless you turn chat sync off, its chats.

    Tau Cloud backup & sync · Every plan

Kinematics follow the source: fixed ring, sun input, carrier output at one quarter of the sun’s rotation. Motion is prescribed, not a physical simulation. Open the model source

The workspace

Chat, code and model
in one window.

The agent conversation, the source files, the 3D view and the parameters sit side by side, and every change is kept in the project’s revision history. More about the product →

The Tau workspace: an AI conversation, editable design files, the planetary gearbox in the viewport and its parameters
Actual Tau workspaceDesign it → check it → make it

Open source

Works with the
tools you use.

Pick a CAD kernel for the part and an AI model for the task, or bring your own coding agent. All of Tau’s source is on GitHub.

Geometry engines

Precise solids, meshes, implicit fields and circuits.

  • OpenSCADBrowser
  • ReplicadBrowser
  • JSCADBrowser
  • ManifoldBrowser
  • OpenCascadeBrowser
  • PicoVoxelBrowser
  • tscircuitBrowser
  • Zoo KCLCloud · Pro
  • Build123dDesktop and plugin · native runtime
  • PicoGKDesktop and plugin · native runtime

Models

Tau-hosted AI, paid with credits.

  • AnthropicClaude
  • OpenAIGPT
  • GoogleGemini
  • xAIGrok
  • Together AIOpen-weight models

Coding agents

Bring your own agent to Tau.

  • Claude CodePlugin · available
  • CodexPlugin · available
  • Grok BuildDesktop · in development

Tau is open source under the Apache-2.0 license.

View on GitHub

Use cases

For makers, engineers
and students.

Pricing

Free to start.

Use Tau for free and pay for hosted AI with credits. Pro is $20 a month and adds 2,000 credits a month and 100 GB of cloud backup. Compare plans →

Free

For trying out Tau

$0/month

Most popular

Pro

More credits for regular CAD work

$20/month plus tax

Enterprise

Verification you can sign off on

Custom

Vision

Where Tau
is going.

Today, Tau covers design, geometry checks and export for manufacturing.

Next, we’re working on closer links between design, fabrication, sourcing and service. The vision page sets out what works today and what is still in development.

Read the vision →

Design. Verify. Build.

Get started
with Tau.