Vortex inhibitor (Anti-vortex plate)

Category Pump accessories

Certificate: ISO
Standard: EN 12845, NFPA 20 / 22, GB 50974
Material: SS304, SS316, etc.
Connection: Flanged as ANSI B16.5 Class 150, EN 1092-1 PN16
Temperature: 0°C to 120°C, water
W. pressure: 300 psi
Effective level: Min 100 mm
Installation: Up and down, both available
Surface: Rough SS / red painting

Download Vortex inhibitor (Anti-vortex plate)

Product Details

Vortex inhibitor is fitted at the inlet of suction pipe in the suction tank. It reduces vortices and dead water area, minimize the air entrainment into the pump pipeline, so to ensure the pump & tank working at its max efficiency.

Available Size (Without accessories)

Size	Accessories	Connection	Working pressure (psi)	Ref.No.
2″ / DN50	/	Class 150 / PN16	300	U5101
2-1/2″ / DN65	/	Class 150 / PN16	300	U5102
3″ / DN80	/	Class 150 / PN16	300	U5103
4″ / DN100	/	Class 150 / PN16	300	U5104
6″ / DN150	/	Class 150 / PN16	300	U5105
8″ / DN200	/	Class 150 / PN16	300	U5106
10″ / DN250	/	Class 150 / PN16	300	U5107
12″ / DN300	/	Class 150 / PN16	300	U5108
14″ / DN350	/	Class 150 / PN16	300	U5109
16″ / DN400	/	Class 150 / PN16	300	U5110
18″ / DN450	/	Class 150 / PN16	300	U5111
20″ / DN500	/	Class 150 / PN16	300	U5112

Note: For flanged connection, it is available with ANSI B16.1 Class 125 / 250, B16.42 Class 150 / 300, EN 1092-2 PN10 / PN16 / PN25, etc.

Available Size (With accessories)

Size	Accessories	Connection	Working pressure (psi)	Ref.No.
2″ / DN50	Yes	Class 150 / PN16	300	U5121
2-1/2″ / DN65	Yes	Class 150 / PN16	300	U5122
3″ / DN80	Yes	Class 150 / PN16	300	U5123
4″ / DN100	Yes	Class 150 / PN16	300	U5124
6″ / DN150	Yes	Class 150 / PN16	300	U5125
8″ / DN200	Yes	Class 150 / PN16	300	U5126
10″ / DN250	Yes	Class 150 / PN16	300	U5127
12″ / DN300	Yes	Class 150 / PN16	300	U5128
14″ / DN350	Yes	Class 150 / PN16	300	U5129
16″ / DN400	Yes	Class 150 / PN16	300	U5130
18″ / DN450	Yes	Class 150 / PN16	300	U5131
20″ / DN500	Yes	Class 150 / PN16	300	U5132

Note:
1. * For anti-vortex plate assembly with accessories, it includes 5 parts: anti-vortex plate, long radius 5D elbow (Elbow pipe/bend), mating slip on flange x 2, mating fasteners x 2 ( Bolt, nut, and washer), and mating gasket x 2.
2. For flanged connection, it is available with ANSI B16.1 Class 125 / 250, B16.42 Class 150 / 300, EN 1092-2 PN10 / PN16 / PN25, etc.