Window Dryer Vent

Description Specs FAQ Shipping Sometimes venting through a wall isn't an option and more creative solutions need to be considered; the 4 inch adjustable window dryer vent by Vent Works was designed to provide the perfect solution for those that need to vent a dryer out of a window. The window dryer vent is made with 24 gauge galvanized steel and has an aluminum back draft damper to prevent drafting from outdoors, it's the perfect solution if venting through the wall is not an option, or is undesirable. Simply place the vent in an open window, slide the side panels to fit the window opening (14inch - 64inch window), and close the window. Standard, low profile dryer vent caps add considerable resistance to airflow. So we designed this vent with an enlarged exterior hood to minimize airflow resistance. This window vent can also be used to vent spray booths, laser engraving machines, exhaust fan blowers and virtually anything else with a 4" inch round exhaust. Downloadable Window Dryer Vent Specification Sheet Duct Diameter 4" Inch Round Duct Outlet (Standard Dryer Vent) Hood Width 5" Inch Hood Depth 4-1/4" Inch Hood Height 6" Inch Panel Length 14"-18" Inch, 18"-24" Inch, 24"-36" Inch, 36"-50" Inch, 50"-64" Inch (5 sizes) Panel Height 8" Inch  Panel Depth 1-1/8" Inch 24 Gauge Galvanized Steel Spring Loaded Back-Draft Damper Made In USA N/A