Legio Astorum Warlord Titan - New Armament - Conversion Beam Extirpator

Hello all, thanks for dropping by. I've added a more esoteric weapon to the Warlord arsenal, not available from Forge World but a model exists in Adeptus Titanicus so there are rules and a look to the weapon.

Here is a 3D print sliced from several other prints and put together by Lord TITANium.

I painted in sub assemblies and added a few more details as the main body seemed too plain and had overly large rivets - scaled from a smaller weapon I guess. 

The las power packs, barrel from a AdMech Dunewalker, various gubbins and hoses were added.

I even added two sensor optics akin to the optics on other warlord weapons, one can be sen at the base of the barrel section.

For comparison of other weapons available for the Forge World titan range. Shorter but stubby. 

Looks good on a Warlord

I'll look forward to using it at 'Maximal Power', with Draining at long range - even higher strength of attack than a Belicosa! Should be a nice fun addition to the force at the next Titan Walk event.

Cheers, Siph (10pts)

Legio Crucius - WIP Warhound #3 - including 3D printed weapons

Hello one and all,

This week I've started working on my 3rd (of 4) Warhounds, potentially with the long term plan to run 2 squadrons of 3 Warhounds at Titan Owner Club Walks.

The main part of the build is complete, with the skeleton of the titan done, pinned and secured together. I've opted for a static pose. The pelvis/torso has had magnets added. I've added pins to all the leg joins to support the Titan, as well as the head - as I've had one or two issues with the first two resulting in the head falling off due to transit.

The weapons for the Hound is exciting! I've printed options for the Titan, with the Volkite Eradicator and Ursus Claw for some serious close firepower. I will have the same load out for Warhound 4. These have been printed using my Anycubic Phantom, the Claw as several parts with the additions of supports for the print. I am really happy with how these look, hopefully more progress soon!

I've also worked on options for a Conversion Beamer and Warhound Melta Cannon, below is the Conversion Beamer. I've used 2 different files, and then spliced them up to allow the construction of it. Pretty happy with it!

Thanks for stopping by! LH