Casio Cassiopeia BE-300 Wiki¶
The Casio Cassiopeia BE-300 is a Windows CE-based pocket PC released in 2002. Built around the NEC VR4131 MIPS processor at 166 MHz with 16 MB of SDRAM and 16 MB of NAND flash, it features a 240x320 color STN display and runs Windows CE 3.0 out of the box.
This wiki documents:
- the hardware architecture
- Windows CE firmware internals
- the historical Linux4.BE porting effort (2002--2004)
- the 2026 revival: a cycle-timed emulator that cold-boots the device from its ROM reset vector, modern Linux kernels that boot from NAND on real hardware, and Glaze OS, a new operating system written for the BE-300
-
Hardware Reference
NEC VR4131 SoC, VRC4173 companion chip, memory map, power states, NAND flash, LCD, audio, USB, battery, PC cards, and board photos.
-
Windows CE Internals
Boot ROM, SPL bootloader, NK.exe cold boot, NAND layout, restore images, PPSH debug shell, and hibernate/resume.
-
Linux4.BE Archive
Historical documentation of the Linux port: bootloader, kernels, ramdisks, toolchain, and PicoGUI.
-
Modern Linux
Linux 2.4.18, 2.6.8.1 and 4.2.9 with Microwindows, OPIE, PicoGUI and TinyX, booting from NAND on real hardware.
-
Glaze OS
A microkernel OS with an early-iPhone-OS-style interface, App Store, Wi-Fi, Bluetooth and a desktop installer.
-
Emulator Documentation
Architecture, building, running, Wi-Fi cards, app installation, VM launcher, web build at linux4be.com, PC Connect over RS-232 or USB, and analysis tools.
The Device¶
The BE-300 was one of the few MIPS-based Windows CE handhelds to receive a community Linux port. The Linux4.BE project (2002--2004) produced working 2.4 and 2.6 kernels with serial console, framebuffer, and PicoGUI support, though hardware driver coverage remained limited.
In 2026 the Modern Linux project rebuilt those kernels, added Linux 4.2.9, and gave them touch, sound, Wi-Fi and NAND-root support. Glaze OS went further, with a new OS and a desktop installer.
The Emulator¶
The emulator performs a true cold boot from the 16 KB masked ROM at 0xBFC00000, loading the SPL from NAND, decompressing NK.exe into RAM, and reaching the Windows CE first-boot UI from unmodified guest binaries. It uses a forked GXemul 0.7.0 as its MIPS CPU engine and models the board down to its power-on state, clock-gate bus stalls, battery, audio, USB and Wi-Fi cards. A browser build at linux4be.com boots Windows CE, Linux and Glaze images.
Key Specifications¶
| Parameter | Value |
|---|---|
| CPU | NEC VR4131, MIPS III LE, 165.888 MHz (PRId 0x0C80) |
| RAM | 16 MB SDRAM (2x Samsung K4S641633D) |
| Storage | 16 MB NAND (Samsung K9F2808U0B) |
| Display | 240x320, 16-bit color STN |
| ROM | 16 KB masked ROM at PA 0x1FC00000 |
| OS | Windows CE 3.0 (upgradeable to .NET 4.x) |
| Companion | NEC VRC4173 |
| Connectivity | RS-232C serial and USB (device) through the dock, headphone jack, piezo buzzer, CompactFlash slot |