Flickering White Floating LED Light

These Tea Light White Floating LED Lights feature a Flicker light and are ready to use right out of the box. They use 1 x CR2032 battery which is included and already installed. This battery is replaceable! The light unit housing also features an anchor point at the bottom, which allows you to tie an anchor line to keep it in place!

These reusable, Tea Light floating LED lights, are waterproof and self contained, so there are no wires to worry about and are thus perfect for use in pools, ponds, vases, bowls, or any water filled containers. These floating Tea Light lights can be used in or out of water and they don't get hot! Can be used as nice accent lights on tables around your centerpieces, in the backyard on the grass, lining walkways as a guide to your event or safety lights to illuminate the way. These are just a few ideas that we have found for them and we are sure that you will find many more! Please share your ideas with us!

These water proof White LED Tea Light lights are available in a variety of great colors. They are about 1 3/8 inches in diameter by about 1 3/8 inch high, and therefore can fit standard Tea Light Holders as well.

The intelliFlame Floating Tea Light lights are turned on by removing the plastic pull tab. There is no on/off switch, but can be turned off by removing the battery. The battery life of the lighting unit is 40 to 70 hours at the same brightness. Click the following link if you need extra Replaceable Batteries for Floating LED Lights.

Please note: The body is made of white plastic and the light that is emitted by the LED is White in color. The body absorbs the color given off from the LED flame only when the Tea Light battery light is illuminated in the dark! The intensity of the color absorbed is determined by how dark the room is. Our item images show what the unit looks like illuminated in the dark and in the light. If you have any questions, please contact us.

These lights will not sink to the bottom, they will float on their own. These lights are NOT designed to be submersed. It is possible to submerse these lights, but please note that leaking may occur which will damage unit. If you do want to submerse them a bit in pool or vase, you can tie an anchor wire to the bottom of the unit.

They have a 2 year shelf life with fresh batteries!

To turn ON, pull plastic tab out and make sure top and bottom part of candle snap together to create a water tight seal. To replace battery, first make sure unit is dry. Then, open candle housing by unsnapping top and bottom halves. Carefully remove old battery and replace with new CR2032 battery and make sure that Plus (+) side of the battery is face down. Place light source on bottom half first, making sure to align with 3 notches. Place top half on bottom half and snap together to create water tight seal. Dispose of old battery properly. To prevent corrosion in items that use replaceable batteries, remove batteries after each event.

IntelliFLAME Battery-Operated Products are:

• Professional grade lights
• Safe alternative to real candles
• Trusted by event professionals everywhere
• Approved by fire marshals
• Long-lasting bright lights with No Heat and No Mess

At intelliFLAME, we take pride in our commitment to quality!