Aluminum Cap Mold

1. Realize steady production with multi cavities, we can make 4/6/8/12 cavities mold,  highly increase efficient and usage rate of material;

2. Adopt air blower to blow away the material, has special air structure inside the mold, guarantee waste ring be handled in time;

3. Adop unique trimming way, which helps to decrease aluminum scraps;

4. Puncture cap mold adopt unique structure, realize adjust every cavity independently, guarantee conformity of puncture force;

4. Mold structure is simple, each cavity is independent, component is standard, no need to tear down mold during maintenance;

5. Mold working parts adopt Cr12Mv, HRC60-63;

6. Mold frame adopt steel material, copper bush ball guide pillar;

7. Mold is applicable for punch machine over 16 ton, punch frequency is 120-200 times/min.

1. Realize steady production with multi cavities, increase efficient and usage rate of material;

2. Twice stretch completed by one mold;

3. Adopt special structure, guarantee constant blank holder force during second stretch, which also guarantee stretch steady and protect surface coating;

4. Mold structure is simple, each cavity is independent, component is standard, no need to tear down mold during maintenance;

5. Mold working parts adopt Cr12Mv, HRC60-63;

6. Mold frame adopt steel material, copper bush ball guide pillar;

7. Mold is applicable for punch machine over 16 ton, punch frequency is 120-200 times/min.

1. Realize steady production with multi cavities, we can make 4/6/8/12 cavities mold,  highly increase efficient and usage rate of material;

2. Tear down and adjust structure independently, it is convenient to align font without disassembling mold.

3. Adop unique trimming way, which helps to decrease aluminum scraps;

4. Mold structure is simple, each cavity is independent, component is standard, no need to tear down mold during maintenance;

5. Mold working parts adopt Cr12Mv, HRC60-63;

6. Mold frame adopt steel material, copper bush ball guide pillar;

7. Mold is applicable for punch machine over 16 ton, punch frequency is 120-200 times/min.