Threaded Brass Inserts. Michael Pasko was an application engineer at Spirol when this article was originally published. Continue Reading. Q&A: Clean up on the Space Aisle: Recovering Space Debris.

We have a T430 with a broken hinge (flange attached to the "axle" snapped in half). Unfortunately what we don't have are the knurled brass inserts nor the corresponding screws for attaching a ...

This injection molder took it upon itself to develop less costly threaded inserts to replace brass and stainless steel inserts. The results are the &146;HARd Thred&146; phenolic glass inserts, ...

Of course to insert these bits of machined brass, you need to press them in, and unless you’ve got a very good hand with a soldering iron it’s usually a good idea to use a press of some sort.

Comparing Brass Versus Stainless Steel Threaded Inserts (.PDF Download) Dec. 22, 2015 Assemblies made of plastic or other soft materials often rely on threaded metal inserts to secure fasteners ...

You might not know what a threaded insert is, but chances are you’ve seen one before. Threaded inserts are small metal (typically brass) inserts that are pressed into plastic to give a strong… ...