Make a magnetic dust filter for a PC case 1. Get materials You may want a more elaborate design than a simple fan filter, while other filters might not quite fit over your intended vent hole. If ...

There are magnetic dust filters that you literally just place on your PC case over a fan opening. They're available for every standard fan size, which means you can use one regardless of which ...

The result of this oil-based filter mimic should be a more dust-free computer ... particularly around the CPU fan and likely the graphics card as well, if you don't clean inside your PC case. And ...

Dust is bad due to how it likes to coat objects and prevent air from flowing freely when being pushed through by fans. If you haven't cleaned your PC in a while, and do not have any filters ...

After a few years, dust can accumulate in a considerable quantity, particularly around the CPU fan and likely the graphics card as well, if you don't clean inside your PC case.

This setup will help push dust out of your PC case, thus reducing the frequency with which you need to clean it in a year. Note that when you do this, you should ensure that all your intakes have ...

Not sure if the 200mm needs replacing but it might. I was just going to swap out the 120mm fans. Two in the front, one in the back and one on the cpu. I've been using these fans and the case since ...

Follow our tips to keep your PC dust-free. When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works. Anyone that owns a PC has to contend with dust ...

In the case of the NZXT H440 chassis—pun unintended—you’ll find a giant, three-fan dust filter behind the front panel, which is a little dusty itself. Wiping down the rear of the front panel ...

A dust filter behind it is secured with six tiny pressed-in magnets, and behind that is a front-panel mount that holds three factory-installed 120mm fans or up to two 140mm fans in three ...