Most ALR motherboards that I've seen (that were made in the last few years) are all made by Intel and most are 12 x 13. The dual slot 1's are either a pre-N440BX or a early L440GX.

The Corsair 2500X is another micro ATX case that's more of a showpiece than the Asus A21. However, its final look depends on a buyer's preferences, since it's one of the most customizable cases on ...

I was quite happy with the specs I had at the time - a Core i5-6600K, an ATX Z170 motherboard, 16GB of 2400MHz memory, a 500GB SATA SSD and a Gigabyte GeForce GTX 1080 Ti card.

Finally, the user will need to verify their chosen PC case is compatible with ATX motherboards. Luckily, this should be simple as most PC cases feature and advertise ATX compatibility.

The NZXT H3 Flow is a remarkably well-built Micro-ATX case that’s easy to work with and striking to look at. It’s not as well-rounded as other PC cases in NZXT's lineup, but it is absolutely a ...

Most mid-tower cases can accommodate both the ATX or the micro-ATX motherboard form factors. Even if you need two graphics cards and a couple of hard drives, a mid-tower case will usually be fine.

I am going to doing some testing on a homebuilt router based on a ATX motherboard and powersupply. I have no case, switch etc. Is their a way to safely get a ATX MB to power on without a switch ...

Testing the HYTE Y60 is the usual bit of ATX hardware, which consists of an AMD Ryzen 9 7950X 16 core (1.128vcore), 24 threaded AM5 CPU, a B650 AORUS Elite AX motherboard, Deepcool's AK620 Digital ...

If micro-ATX isn't doing it for you, then check out the MEG Maestro 700L PZ. This full-sized ATX case is long enough to support eATX motherboards.

How to Install a Micro ATX Motherboard. Small form factor computers, which are often used where space is limited, such as medical offices and call centers, typically use smaller motherboards as a ...

The MSI Mag Forge 112R is listed as an ATX case, but just about has room (and mounting holes) for an E-ATX motherboard, giving you plenty of room to work with, and allowing plenty of room for ...

The NZXT H3 Flow is a remarkably well-built Micro-ATX case that’s easy to work with and striking to look at. It’s not as well-rounded as other PC cases in NZXT's lineup, but it is absolutely a ...