Magnachip’s 80-V MXT MV MOSFET in a TOLT package for e-scooters and LEVs delivers improvements in thermal management and power efficiency.

A separate aluminum enclosure was bonded to the copper heat sink, giving [Zach] a place to mount his audio sync and timecode recorder and providing extra thermal mass. Does it help?

Experiments on heat sinks have found that the predicted temperature using an R-Tools thermal model of 78°C was very close to the measured value of the R-Theta heat sink baseplate.

THERMAL-XR® coated on the heat sinks, enhances the heat sink efficiency, enabling smaller heat sinks and more compact PCB assemblies. The total amount of THERMAL-XR® that could be used for this ...

Magnachip releases a 80V MXT MV MOSFET, the MDLT080N017RH, featuring a TOLT (TO-Leaded Top-Side Cooling) package.

The new all-metal heat sinks show a greater than 12% increase in pull-out strength over a popular epoxy-bonded heat sink. Pull strength is the tensile pull capability of one linear inch of fin-to ...

In his limited heat sink and thermal knowledge, a heat sink always became hot – and that was a sign that it was working well, so to speak. He never grasped that a heat sink was doing its job by ...

Figure 3: A heat sink coated with THERMAL-XR® on all sides, excluding the base, that is 39% smaller achieves the same results and temperature as the bare aluminium heat sink depicted in Figure 1.

Magnachip Semiconductor Corporation ("Magnachip" or "Company") (NYSE: MX) today announced the release of a new 80V MXT MV ...