Car Window Tint Application Tools Kit, Luxiv 9 Pcs Vehicle Glass Protective Film Installing Tool Car Window Film Squeegee Automotive Film Scrapers Window Tint Tools (B) This package includes nine ...

Move the tint into place at the top of the window, leaving a 1/8-inch gap from the top of any sliding window. Run the squeegee along the top of the window, pushing any air and water out of the top ...

How To Tint Car Windows Install window tint in a clean, dry, shaded, dust-free area — working in a garage is best. Be patient and don’t rush. Carefully follow all steps to do the job properly ...

Dickno 4PCS Felt Edge Squeegee Car Wrapping Tool Kit, Vinyl Wrapping Tool Window Tint Kit, Auto Applicator Tool for Vinyl Wrap, Window Tint, Wallpaper, Decal Sticker Installation 65 ratings ...

Once you remove the protective liner, line up the tint with the window by tucking it just below the bottom seal, then squeegee the soapy water out of it while being careful not to move the tint.

Then, you'll need to use a squeegee, such as one from the HTVRONT window film kit, to carefully remove the bubbles, secure the corners, and trim off any excess material.

Windshields can't have a dark tint in any state, so you must choose a tint with a VLT of 80 percent or more. The rear window may also be tinted, similar to the rear side windows, but some states ...