About 53,500 results
Open links in new tab
  1. TIPM issues and replacement advice - Dodge Nitro Forum

    Jul 24, 2014 · Hi everyone, I'm having some really strange issues with my 2007 Dodge Nitro SLT (3.7 V6). I'm pretty confident that the issues are all tied to the TIPM, but I need help figuring …

  2. starting problem, keep cranking for long time ... - Dodge Nitro …

    Feb 28, 2012 · Anytime my fiancés nitro was warmed up it took 5-6 seconds of cranking to start. I replaced it 2 days ago and and it's fired right up every single time since then.

  3. PCM wire and connector location - Dodge Nitro Forum

    Dec 14, 2022 · I have a 2011 Dodge Nitro SE 4WD 3.7, and the Engine lights are on, showing PO300. I replaced ALL spark plugs, the ignition coil, the spark plug wire, the fuel injectors, and …

  4. No Crank, No Start ( Solved) - Dodge Nitro Forum

    Nov 24, 2015 · I have a no crank, no start problem, it is an 08 Nitro with a 4.0 litre engine, automatic, remote locks and start. The truck has 78000 kms on it. Changed the starter, try it in …

  5. power door lock not working - Dodge Nitro Forum

    May 21, 2011 · Hello Nitro owners. I have a problem with my nitro, power door lock not working but the unlock feature is working. I want to fix this but i dont know what to do. I need help!.. …

  6. ABS, ESP/BAS & Traction Control lights on - Dodge Nitro Forum

    Apr 1, 2014 · my ABS, ESP/BAS & Traction Control lights keep coming on together. Problem started a few days ago after hitting a bump. They turn off after a few minutes and I don't notice …

  7. Dodge Nitro Forum

    Mar 20, 2025 · A forum community dedicated to Dodge Nitro owners and enthusiasts. Come join the discussion about performance, modifications, suspension, reviews, troubleshooting, …

  8. 5.7L hemi swap.....help - Dodge Nitro Forum

    Oct 1, 2012 · The Nitro is a Liberty, with a different body. The reason I am telling you this is that these vehicles all share common parts. The engine bay of the Liberty/Nitro was designed for …

  9. Oil Pressure Switch Location - Dodge Nitro Forum

    Jul 16, 2012 · I have a 2008 Nitro with a 3.7L. The oil pressure switch is located directly above the oil filter in the front of the engine. You need a 1 - 1/16 deep well socket to remove it. The …

  10. Blend Door Actuator Replacement. - Dodge Nitro Forum

    Jun 23, 2018 · With the Nitro running, If you look under the dash at the blend actuator, and change the heat setting, you should see the blend door actuator move as well as the little …