Kanoa

ICC 2026 starts next week! We'll be at Booth 38 all three days, September 22–24 in Sacramento. Be sure to catch our Solution Showcase at 11:30 AM in the Gateway Theater, plus our Breakout Talk and Industry Panel. We'll also have our live "better together" demo running all week with Opto 22, Cirrus Link Solutions, 4IR Solutions, Joltek, and Flow Software Inc. Thanks in advance to Inductive Automation for putting on another great show. See you there! #ICCUnleashed

None of what we do runs in isolation, and we were excited to take on Inductive Automation's challenge to build a "Better Together" story to show at ICC. We'll be running a live demo built on Ignition alongside several partners across its ecosystem — Opto 22, 4IR Solutions, Cirrus Link Solutions, and Flow Software Inc. — pulling in real and simulated plant data and putting it to work inside Kanoa MES. No single piece of software here is "the one thing" a factory needs, Kanoa MES included. Real solutions come from technology, people, and process working together, and none of it works without Ignition underneath — Inductive Automation built an open platform that gets more valuable every time it talks to another system, and everything in this demo exists because of that openness. So come check out our booth and Solution Showcase on Wednesday to learn more about what Kanoa and the Ignition Technology Ecosystem built for ICC this year! #ICCUnleashed

Digital transformation projects don't usually fail because of the technology. They fail because of change management. Catch our co-founders Jason Coope, PMP & Nicole Coope at Inductive Automation's ICC 2026 for their breakout talk: "Your MES Isn't Failing — Your Change Strategy Is." 📍 Edge Theater | Wednesday, Sept 23 | 1:30 PM Drawing on real-world case studies and the Lean DMAIC framework, they'll dig into why employees resist change — often for good reason — and how to manage the people side of an MES rollout to actually get the results you're after. It's right after our Solution Showcase (11:30 AM, Gateway Theater) — easy to catch both. #ICCUnleashed

Kanoa MES is evolving — and we're showing you what's next. Join us next Wednesday at Inductive Automation's ICC 2026 for our Solution Showcase: "What's New and What's Next: The Future of Kanoa MES for Ignition." 📍 Gateway Theater | Wednesday, Sept 23 | 11:30 AM Sam Russem, Jason Coope, PMP, and Aaron R. will walk through: → What's new across Kanoa MES → A closer look at Kanoa Maintenance, our newest CMMS solution → Where Kanoa MES is headed next Grab a seat, then swing by our booth afterward to see it in action! #ICCUnleashed

We're proud to be a Silver Sponsor of Inductive Automation's ICC 2026 — the Ignition Community Conference — September 22–24 in Sacramento! Come find us at Booth #38 on the second floor. The Kanoa team will be there all three days to talk Kanoa MES, show off our newest solution Kanoa Maintenance, and run a live "better together" demo built with several of our partners across the Ignition Technology Ecosystem. More on what we've got planned this week — stay tuned. See you in Sacramento! #ICCUnleashed

We go live in 1-hour!!! Last chance to register for our Kanoa MES 1.15 Webinar Showcase - Kanoa Maintenance & Kanoa Inventory. Hope to see you there! https://lnkd.in/eyJGWFjf

Great read from Kanoa, an Inductive Automation Gold Technology Provider! If you're already running Ignition on the plant floor, you’ve already done the heavy lifting for condition-based maintenance. Check out this article by Sam Russem on how Kanoa Maintenance leverages your existing Ignition architecture and Perspective modules to turn calendar-based PMs into true condition-based maintenance without requiring a complex, third-party CMMS integration.

One week from today: Kanoa Maintenance and Kanoa Inventory Live! On Wednesday, September 9 at 1:00 PM ET, we're running a live Kanoa MES 1.15 Webinar Showcase on Kanoa's two newest Solutions for factory maintenance management and plant inventory. We'll introduce each one, demo it live, and show the specific tie-ins that make them more valuable when they're connected to the rest of your Kanoa MES environment, all powered by Ignition. Still on the agenda: → Kanoa Maintenance, introduced and demoed live → Kanoa Inventory, introduced and demoed live → How they connect to Kanoa MES (and each other) → Live Q&A Still time to grab a seat: https://lnkd.in/eyJGWFjf Already registered? See you there!

If you're on Inductive Automation's #Ignition, MES usually doesn't arrive all at once; it sneaks in. A few Perspective screens for PLC data turns into shift counts, then downtime reasons, then work order progress, then quality checks. At some point you're not just visualizing equipment anymore. You're managing production execution. We wrote up a practical definition of MES for exactly that moment — what makes it different from SCADA, dashboards, OEE, and "just a database," plus a quick self-check for whether your Ignition app has already crossed into MES territory: • Are operators selecting modes, states, or downtime reasons? • Do quality checks tie back to the order, asset, and item? • Are you rebuilding the same screens and reports across lines or plants? If a few of those sound familiar, this one's worth a read: https://lnkd.in/gwAzkDf4

Kanoa Maintenance and Kanoa Inventory are now part of Kanoa MES 1.15 — and we're putting them on screen. Join us live on Wednesday, September 9 at 1:00 PM ET for the Kanoa MES 1.15 Webinar Showcase. We'll introduce both Solutions, run a live demo of each, and show the specific tie-ins that make maintenance and inventory more valuable when they're connected to the rest of your Kanoa MES environment — all powered by Inductive Automation's Ignition. On the agenda: → What Kanoa Maintenance does + a live demo → What Kanoa Inventory does + a live demo → How they connect to Kanoa MES (and each other) → Live Q&A Register here: https://lnkd.in/eyJGWFjf