Scribd
Upload
60 views1 page

Specifications: Touch Control®

This document provides specifications for a metal kitchen faucet with various finish options. It can be installed with either a 3/8 inch ball nose connection or with a side spray attachment. The faucet operates with less than 5 pounds of force via a lever style handle. It has a maximum water flow of 2.2 gallons per minute from its 4000 series ceramic disc cartridge. It meets various standards for safety and accessibility and comes with a lifetime warranty for residential use or 5 years for commercial use.

Uploaded by

aligator98
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views1 page

Specifications: Touch Control®

This document provides specifications for a metal kitchen faucet with various finish options. It can be installed with either a 3/8 inch ball nose connection or with a side spray attachment. The faucet operates with less than 5 pounds of force via a lever style handle. It has a maximum water flow of 2.2 gallons per minute from its 4000 series ceramic disc cartridge. It meets various standards for safety and accessibility and comes with a lifetime warranty for residential use or 5 years for commercial use.

Uploaded by

aligator98
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Specifications

FAUCET DESCRIPTION

Metal construction with various finishes identified by suffix


Inlet shanks will accept 3/8" ball nose connections
With and without side spray versions available

OPERATION

Lever style handle


Operates with less than 5 lbs. of force

FLOW

Tap water: 2.2 gpm max (8.3 L/min)

CARTRIDGE

4000 ceramic disc cartridge design


Nonmetallic/nonferrous and stainless steel material

Touch Control

STANDARDS

Single Handle Lever Kitchen Faucet


with Protg Side Spray

Third party certified to CSA B-125.1, ASME A112.18.1, ICC A117.1


and all applicable requirements referenced therein
Certified to ANSI/NSF 61/9
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act

ADA

Models: CA87530 series


CA87539 series (less side spray)

for lever handle

WARRANTY

NOTE: DESIGNED TO BE INSTALLED THROUGH 3 HOLES


1-1/4" (32mm) MIN. DIA. AND 4" (102mm) ON CENTER.

Lifetime limited warranty against leaks, drips and finish defects


to the original consumer purchaser
5 year warranty if used in commercial installations

3-5/16
(84mm)

6-7/8
(171mm)
5-3/16
(131mm)
9-7/16
(239mm)

CRITICAL DIMENSIONS
(DO NOT SCALE)

Rev. 3/09

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN


www.moen.com

You might also like