AMD AHCI controller driver distribution list
Version 1.2.001.0327, 12/12/2011
LHx64
LHx86
Win7x64
Win7x86
- Vista, x64
- Vista, x86
- Windows 7, x64
- Windows 7, x86
Supported chipsets
SB7xx family
SB8xx family
Hudson-1/2/3 family
SB9xx family
SP5100
Installation Notes
You can install/uninstall the driver by running the CIM installer. This method will
correctly show the driver as WHQL certified in the Device Manager.
Revision History
1.2.001.0327
Fixed:
- READ NATIVE MAX ADDRESS EXT failure
1.2.001.0321
Fixed:
- ZPODD hot swap support added (optional, available only w/ appropriate
BIOS support); 10 sec delay should be observed between device un-plug and
hot-plug; Safely Remove Hardware and Eject Media applet recommended
to be used to eject a CDROM before physical removal.
- Port Multiplier support is enabled by default on eSATA ports.
1.2.001.0317
Fixed:
- Roxio SW prevents ZPODD to enter the ZP mode
1.2.001.0301
Fixed:
- Roxio media erase failure
DVD region tab might be absent, when the Properties menu item is clicked
in the Device Manager
The sequence of operations - the PREVENT ALLOW MEDIUM REMOVAL
(Prevent = 1) command, a pause longer than 1 min, the PREVENT ALLOW
MEDIUM REMOVAL (Prevent = 0) command or PREVENT ALLOW
MEDIUM REMOVAL (Prevent = 1), Sleep, Resume prevents a ZPODD to
enter the ZP state
1.2.001.0296
-
_SDD/_GTF methods evaluation added
1.2.001.0292
-
Power DVD disk eject failure fix
1.2.001.0282
Fixed:
- Possible failure to enter power saving states having ongoing ZPODD activity
1.2.1.275
-
Memory usage optimization
ZPODD power on incurred 10 sec delay workaround
Potential DMA overrun bug fix
1.2.1.263
-
Performance optimization
Boot Optimization
TRIM implementation
1.2.1.238
Added
- Zero Power ODD support (if enabled in BIOS; Windows 7 only); the ZPODD
is powered off after 60 Sec w/o media inside and tray closed (for tray type
ZPODDs)
- DAPS support
- DIPM Setting Index 3 added to AHCI Link Power Management Settings (in
addition to existing Active(0), HIPM(1) and HIPM+DIPM(2) ) and can be
chosen to any Power Scheme using the inbox utility powercfg.exe
1.2.001.210
Renamed
- amdsata.inf -> amd_sata.inf
- amdsata.cat -> amd_sata.cat
- amdsata.sys -> amd_sata.sys
- amdxata.sys -> amd_xata.sys
1.2.001.197
-
Fix a bug where FUA was re-enabled after hibernation / de-hibernation operation
and it is now disabled under all conditions.
1.2.0.164
-
Minor bug fix
1.2.0.147
-
Slight performance improvement
FUA is changed to be disabled by default
1.2.0.144
-
Slight performance improvement
Port Multiplier enumeration optimization
Velocity test numbers improved
1.2.0.125 first release