Scribd
Upload
2K views1 page

3g Huawei Commissioning

The document provides instructions for commissioning a 3G Huawei network node. It includes the IP address and login credentials, steps to check the software version and configure cell and transmission settings, and commands to check scrambling codes, run tests, and power cycle the baseband unit. The network element's local IP address is also listed.

Uploaded by

Jan Abraham S. Quijano
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views1 page

3g Huawei Commissioning

The document provides instructions for commissioning a 3G Huawei network node. It includes the IP address and login credentials, steps to check the software version and configure cell and transmission settings, and commands to check scrambling codes, run tests, and power cycle the baseband unit. The network element's local IP address is also listed.

Uploaded by

Jan Abraham S. Quijano
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

3G HUAWEI COMMISSIONING IP address: 17. 21. 2. 10 Subnet Mask: 255.255.255.

0 User: admin Password: NodeB NodeB Local IP: 17.21.2.15 Connect: normal 1st step: Bootroom if B041 no need to Bootrom Update 2nd step Software: B041 3rd Step: data config from huawei 1st Command: LST VER DSP CELL CfG- kung ok na yung cell Check Transmission- DSP E1T1- IF Normal OK Loopback e1- DSP E1T1- Physical loop Site on air- DSP ETHPORT Site Down- DSP TTPORT IP- LIST OMCH SET IP- MOD OMCH RESET NODEB- RST NODEB PING COMMAND SCRAMBLING CODE: DSP CELL CPG PAT TEST: BBU- POWER ON/ POWER OFF

You might also like