Welcome, Smokerguy Notifications My Profile Log Out
PelletSmoking.com
What's New? Articles Forum Shop Blogs
New Posts Private Messages FAQ Calendar Community Forum Actions Quick Links Advanced Search
Forum The Auger Searching for the Cure Ham Brining 101 (and Bacon)
Results 1 to 10 of 42 Page 1 of 5 1 2 3 ... Last
+ Reply to Thread
Thread: Ham Brining 101 (and Bacon)
Like Share 189 people like this. Be the first of your
friends.
Thread Tools Search Thread Rate This Thread Display
12-19-2013, 08:17 PM #1
TentHunter
Ham Brining 101 (and Bacon)
Moderator
Join Date: Oct 2010
Location: NE Ohio, USA
Posts: 5,901
This brining process can be used to make Bacon, Canadian Bacon and Corned Beef, as
well as Ham!
Table of Contents
Section 1: Why Brine & What do I need?
Section 2: What's in a Brine - FAQ's about Salt, Sugar & Nitrite Levels
Section 3: Brine & Meat Preparation
Section 4: Injecting & Curing the Ham
Section 5: Smoking & Glazing the Ham
Disclaimer: This project was started about a year ago and is based on my personal experiences, research and
feedback from others.
Special Thanks go to my friend Dr. Kevin Galat who has a PhD in chemistry and has done work in the field of
microbiology. He is a great source of info.
Last edited by TentHunter; 04-03-2015 at 11:17 AM.
<><
MAK 1 Star General #651 - 2014 Model
former owner - MAK 1 Star General #171
22.5" Weber Performer with Stoven Pellet Grill attachment
27 + year old 22.5" Weber Kettle (still works fine)
Modified Horizontal Offset Smoker - used mainly for cold smoking.
Blog this Post Reply Reply With Quote
12-19-2013, 08:17 PM #2
TentHunter
Section 1: Why Brine & What do I need?
Moderator
► Curing Methods
Curing is a way of preserving meat and gives it that classic cured flavor and pink color we associate with Ham,
Bacon, smoked sausage, etc.
Artisan hams, such as Parma & Smithfield, are salted & dry-cured for months, or even years in very strict
Join Date: Oct 2010 conditions. Mass-produced hams are machine-injected with a quick-curing brine, and baked in large smoker-
Location: NE Ohio, USA ovens. They are rushed and average quality at best.
Posts: 5,901
Brining offers a relatively quick and easy way to make a quality ham at home. It requires very little equipment,
and even a few days in the brine improves the "hammy quality" of the flavor and texture!
Two brining methods: We'll use the Pump & Immerse method.
► What's Needed:
√ Some basic equipment,
√ A fresh cut of Pork (preferably a leg cut),
√ Brine Recipe/Ingredients: Water, Salt, Sugar & Curing Salt #1.
Equipment: Chances are you already have these items:
• A syringe type meat injector,
• A thermometer - to check/monitor the Ham's internal temperature.
• A food-safe, lidded container, or brining bag big enough to hold your ham and between 1½ - 3
gallons of brine. Keep in mind, it will need to fit in your refrigerator.
• A Grill/Smoker
► Which cut of pork to use:
Recommended Cuts & Typical Weights:
Fresh Ham cuts can be purchased as whole, or half cuts. You may need to seek out a butcher to find them.
• Whole Ham (often labeled as "Pork Leg) 15 - 26 lbs.
• Ham Butt End 8- 13 lbs
• Ham Shank End 8- 13 lbs
• Picnic Ham (Shoulder) 7 to 11 lbs.
Picnic Hams are a great option, especially if you have trouble finding an actual Fresh Ham cut. They're
easier to find, economical, and easy to handle, making them ideal for the average do-it-yourself-er.
I tend to use Picnic Hams more often than actual ham cuts.
Picnic Hams look just like a Ham Shank Half when done
Other Options:
• Boston Butt (boneless) - Can be used for: Boneless style ham, or Buckboard Bacon (butterfly
into two thinner sections).
• Pork Loin (boneless) - Can be used for: Canadian Bacon, Peameal Bacon, or Kasseler Ham
(Germany). It's an easy-to-slice ham for sandwich meat.
• Pork Sirloin Roast - would make a great cut to cure into a small ham.
Make sure it's Fresh!
Whichever cut you choose, be sure it is labeled "Fresh," meaning a cut that's NOT been cooked or cured.
Avoid cuts labeled "Enhanced with a solution..."
Last edited by TentHunter; 02-16-2015 at 08:39 AM.
<><
MAK 1 Star General #651 - 2014 Model
former owner - MAK 1 Star General #171
22.5" Weber Performer with Stoven Pellet Grill attachment
27 + year old 22.5" Weber Kettle (still works fine)
Modified Horizontal Offset Smoker - used mainly for cold smoking.
Blog this Post Reply Reply With Quote
12-19-2013, 08:18 PM #3
TentHunter
Section 2: What's in a Brine?
Moderator
FAQ's about Salt, Sugar & Nitrite Levels
Note: This section packs a lot of info and is intended for people who want to know how a brine is
formulated. If you'd rather just follow a recipe, then feel free to move on to Section 3 where I give a
basic brine recipe.
Join Date: Oct 2010 So, what's in a brine? A typical curing brine contains: Water, Salt, Sugar, Nitrite Cure, & sometimes Other
Location: NE Ohio, USA Flavorings.
Posts: 5,901
The three important factors are:
• Brine Strength
• Sugar Level
• Nitrite Level
Once you understand these, you'll be able to customize your own brine recipes that are safe and
taste the way YOU want!
► Salt Sense - Which kind of Salt should I use?
• Non-iodized table Salt & Sea Salt: Not ideal! Contains anti-caking agents and/or impurities.
• Kosher Salt: Good choice - Pure & clean tasting with no additives. Varies in size, so it should be
weighed and not measured.
• Pickling salt: Best choice! - Inexpensive, made for brining, measures/weighs consistently, AND...
...it's a Kosher product - NO impurities!
► Brine Strength (Salinity) - How Much Salt should I use?
Brine strength is determined, for the most part, by how salty you like your ham.
How accurate do I need to be?
Weighing is more accurate, but if you use pickling salt and measure according to the chart above, then you will
be fine! A little more or less salt in the brine won't make a noticeable difference in your ham.
► Sugar Level (Sweetness)
Sugar cuts the harshness of salt & adds favor. It doesn't affect curing, so how much you use is purely a matter
of taste & the type of ham being made. Any natural, water soluble sweetener will work:
• Granulated Sugar - provides a non-descript sweetness.
• Brown Sugar - Probably my overall favorite. It's cheap with a nice hint of molasses. The darker it
is - the more molasses it contains.
• Honey Self explanatory!
• Maple Syrup Definitely not cheap! If you love Maple (like I do), then consider using regular Sugar
+ Maple Flavoring.
Sweeteners can vary quite a bit by weight, but FORTUNATELY most of them have similar sweetness levels when
measured. The one exception is Powdered Dextrose, which is only 70% as sweet as regular sugar.
Basic guide to sweetness level & weight to measure conversion:
► Nitrite Curing Salt
Nitrite's role in curing is important. Besides preventing botulism, it helps develop the color and flavor we desire,
and keeps fat from turning rancid.
Which curing salt should I use?
Cure #1 is the best choice for our purpose.
Note: Cure #1 & Tender Quick are NOT interchangeable; Do NOT use Tender Quick in recipes calling for
Cure #1!
Common Brands of Cure #1: Prague Powder #1, DQ Cure #1, Insta Cure #1.
The brand is not important, so long as it contains 6.25% sodium Nitrite.
Curing salt is typically pink in color, so it's not confused it with regular salt.
► Nitrite Levels - How much Cure #1 should I use?
USDA policy requires between 120 - 200 Parts Per Million of "ingoing nitrite" for brine-cured meat.
USDA Processing Inspectors Handbook, Pg 12
So, 120 PPM is our goal, but how do we achieve that?
► First off, the popular "1 tsp per 5 lbs meat" rule CANNOT be used for brining!!!
► The Pump Rate (how much you inject, per lb of meat) determines how much nitrite you need per gallon.
• Pick your pump rate based on how long you want the ham to cure in the brine: 10% 6-10 days;
20% 4-7 days; 30% (max) 3-5 days (I prefer a 20% or 30% pump rate).
• The more brine you inject, the less nitrite you need per gallon of brine, because you're pumping
more into the ham.
• Example:a 10% pump (10% of the ham's weight) is easy to inject, but a 20% pump uses 50% less
nitrite in the brine, because you're injecting twice as much.
► So, we need to calculate based on the Pump Rate...
and based on that calculation we get:
Q: Does injecting more brine affect salt & sugar levels too?
A: Not really... The nitrite get's locked in, but given at least a few days, the higher salt & sugar levels in the
ham will push their way out until they equalize with the rest of the brine.
► Other Flavorings
Besides sweeteners, you may want to add other flavors to your Ham. Some common flavor ingredients:
• Pickling Spice - used for corning beef and works well with Hams too.
• Allspice Berries - Gives a classic Holiday Ham flavor of cinnamon, clove, & nutmeg.
• Juniper Berries, Coriander seeds, Peppercorns - German style Ham & Bacon
►Customizing Recipes
The tables above will make it easy to customize recipes to suit your needs.
Examples:
► If a recipe is too salty or sweet for your tastes, use the "Brine Strength" or "Sweetness Level" charts to
adjust the levels to your liking.
► If you like a recipe, but want to inject at a 30% rate instead of 10% - in that case you would leave salt &
sugar levels alone and adjust ONLY the amount of Cure #1, according to the "Cure #1 per Gallon" table.
► To build a recipe from Scratch:
1) Pick your Salt level,
2) Pick your Sugar level & Sweetener,
3) Pick your pump rate (10% or 30%) & add the appropriate amount of Cure #1,
4) Add other flavorings as you like,
...and CONGRATULATIONS! You have just customized your own ham brine!
Last edited by TentHunter; 02-17-2015 at 07:41 PM.
<><
MAK 1 Star General #651 - 2014 Model
former owner - MAK 1 Star General #171
22.5" Weber Performer with Stoven Pellet Grill attachment
27 + year old 22.5" Weber Kettle (still works fine)
Modified Horizontal Offset Smoker - used mainly for cold smoking.
Blog this Post Reply Reply With Quote
12-19-2013, 08:23 PM #4
TentHunter
Section 3: Brine & Meat Preparation
Moderator
Once you have your brine recipe, you can begin the process of mixing the brine & curing the Ham.
Here's my basic Brown Sugar Ham Brine recipe. Feel free to use it or create your own (see section 2).
For a 20% injection:
Join Date: Oct 2010
Location: NE Ohio, USA
Posts: 5,901
For a 30% injection:
► How much Brine do I need?
There is no hard & fast rule. As long as the ham can be injected and then submerged with plenty of room to
move, IT WILL WORK!!!
How is this possible? Equalization! The salt/sugar in the brine & ham move in & out until they
reach a state of equilibrium. A ham soaked in a 5% brine will NEVER reach more than 5%, no matter how much
brine is used.
Here's a rough guide to how much brine you'll need:
My normal batch is 1 1/2 gallons for a 10 lb picnic ham, or 10 - 12 lbs bacon.
Graduated mixing pails (found in paint depts.) are cheap, and make measuring water and brine easy.
► Water & Spice Prep
Water
Unfiltered tap water MUST be boiled for at least 5 minutes to kill any pathogens and remove chlorine. Allow it to
cool to room temp, THEN measure and mix the brine.
IMPORTANT: DO NOT add nitrite cure until AFTER the water has cooled!
I like to use distilled or filtered water. It's cheap, there's no off tastes (chlorine, sulfur, etc.) and you don't have
to boil it!
Spice Prep - Flavoring the Brine
If you're adding any spices to your brine, simmer them in a small pan of water first, then allow it to cool while
the spices steep and release their flavors. When mixing the brine, add the spices & Spice-liquid making sure to
count it as part of the water to be used when measuring.
The brine will be infused with the spice flavors, which go deep into the ham when you inject!
►Mixing the Brine
• [li]Measure the water into a non-reactive container large enough to vigorously stir without making a
mess. A stainless steel stock pot works really well for this![/li]
[li]Carefully measure and add the Sugar, Salt & Nitrite Cure[/li]
[li]Stir until all the salts & sugars are dissolved.[/li]
At first the brine may look cloudy with foam on top. This is normal and will clear up!
Place the brine in the refrigerator to start chilling while you prep the ham.
►Meat Prep
Before Brining can begin, there's a little meat prep that needs to be done.
Skin/Rind - If the skin is still on the ham, it should be removed or it will make injecting difficult and will
affect brining & smoke absorption.
This task will require a very sharp thin bladed knife such as filet or boning knife. Start at a corner and make an
incision just under the skin. Continue carefully slicing along the underside of the skin as you peel it back with
your other hand. A paper towel can help grip the slippery skin.
Don't worry if it doesn't look perfect; it won't matter once it's smoked.
Fat - Trim the fat as you see fit. I like to trim most of it off, leaving a thin layer.
Aitch Bone (hip bone) - If you purchased a Butt Half or Whole Ham look at the rump end and you
should see an oblong bone that looks similar to the bone in a Pork Butt. This is the Aitch (or hip) bone and
should be removed, otherwise injecting and slicing this end of the ham will be difficult.
Locate the bone by feel, then using a sharp boning or filet knife, CAREFULLY cut around the entire back side of
the bone plate to expose the ball & socket joint. Then slice all the way around and through the ligament holding
it together. You may need to pull or twist the bone to separate the joint.
Tip: Leave the meat on this bone and DON'T throw it away! Stick it in the brine to cure, then smoke it along
side the ham to use it in a pot of beans. Delicious!
Now you're ready to start brining!
Last edited by TentHunter; 12-20-2015 at 04:36 PM.
<><
MAK 1 Star General #651 - 2014 Model
former owner - MAK 1 Star General #171
22.5" Weber Performer with Stoven Pellet Grill attachment
27 + year old 22.5" Weber Kettle (still works fine)
Modified Horizontal Offset Smoker - used mainly for cold smoking.
Blog this Post Reply Reply With Quote
12-19-2013, 08:23 PM #5
TentHunter
Moderator
Section 4: Injecting & Curing the Ham
► Measuring the Brine
Join Date: Oct 2010 To measure out the amount of brine to be injected, you need to know:
Location: NE Ohio, USA
Posts: 5,901 1) The ham's weight,
2) The Pump Rate (how much to inject per lb of meat).
If you followed section 2 and made your own brine recipe, then you will already know what your Pump Rate is,
otherwise follow the recipe's directions. It will say something like, "Pump to 10% of the ham's weight," or
"...use a 20% pump."
• If weighing your brine, use this formula: Ham's Weight X Pump Rate = How much Brine to inject
• If you don't have scales, fortunately 1 liq. oz of brine weighs approximately 1 oz, so...
use this formula: Ham's Weight X Pump Rate X 16 = How many liquid oz to inject
• or... just follow the table below.
Put the rest of the brine back in the refrigerator to keep it cold.
Injecting
• You will need a syringe type injector, and a tub to hold the ham and catch brine while you inject.
• Be sure to inject thoroughly around the bones to prevent bone souring! After that, inject as evenly as
possible throughout the rest of the ham.
• If a little brine seeps out, that's OK. If a lot seeps out, collect and re-inject it.
► Curing the Ham
After injecting, the ham is now ready to be immersed and begin the curing process. During this time the salt &
sugar will equalize throughout the ham, and it will take on its characteristic color, texture and flavor.
Place the ham in it's brining container and add the remainder of the brine making sure the ham is completely
submerged. Use a small heavy plate to weigh it down if necessary.
For larger hams, a brining bag is a good option. Be sure to put it in a container just in case the bag leaks!
Place the covered container is the refrigerator and cure at the following rate:
► Other Uses
Don't forget you can use this method to cure other meats such as:
Bacon, Canadian & Buckboard Bacon or Corned Beef.
Last edited by TentHunter; 02-17-2015 at 06:37 PM.
<><
MAK 1 Star General #651 - 2014 Model
former owner - MAK 1 Star General #171
22.5" Weber Performer with Stoven Pellet Grill attachment
27 + year old 22.5" Weber Kettle (still works fine)
Modified Horizontal Offset Smoker - used mainly for cold smoking.
Blog this Post Reply Reply With Quote
12-19-2013, 08:24 PM #6
TentHunter
Moderator
Section 5: Smoking & Glazing the Ham
Now that the Ham is cured, there's just a couple final steps before it's ready to be smoked.
► Pre-Smoke Prep
Drying & Pellicle Formation
Join Date: Oct 2010
Remove the Ham from the brine, place it a wire rack and discard the brine. NEVER re-use brine!
Location: NE Ohio, USA
Pat the ham off with some paper towels and let it air dry near a fan or under the hood of your stove with the
Posts: 5,901
fan running until it feels tacky to the touch. The tacky film that forms is a layer of proteins called the pellicle. It
allows smoke stick to your ham. There's no minimum time frame for drying; as long as it feels tacky, smoke will
stick to it.
Scoring & Seasoning (optional)
Scoring a cross-hatch pattern into the fatty side of the ham can add a nice look and cover up imperfections.
If you season the ham, I think it's best to keep it very simple. Here are a couple of ideas:
• A coating of Fine Black pepper, instead of a glaze, works well and gives an old world look.
• A sprinkling of course ground Allspice (my favorite) works simple and will work with most glazes. I
use an inexpensive pepper grinder to grind the allspice berries over the ham.
• Here's a classic: Score a crosshatch pattern and spike the sections with cloves.
This ham has been scored & seasoned with Allspice.
Ham Netting (optional)
Ham Netting can be used if you prefer to hang your hang. This requires a smoker tall enough for hanging.
Be sure to get netting made for the temperatures you plan to use! Cotton works for cooking & smoking.
► Smoking Methods
And finally... the ham is ready to be smoked! The only thing left is to decide how you're going to smoke it.
Any of these methods will work and trust me, they all yield delicious results.
Which one you choose depends upon how much smoke you want versus time constraints.
Making Cold Smoke
If you don't have a smoker than can produce cold smoke (below 100° F), here are a couple of easy options that
will work for almost any grill:
A-MAZE-N Products offers a few different devices designed to give cold smoke using pellets or sawdust.
The A-Maze-N Pellet Tube will provide up to 6 hours of cold smoke using pellets.
Another easy option is to put a dry chunk of wood on top of 4 - 6 lit charcoal briquettes (do NOT soak the
wood). This can provide 2 - 3 hours of good clean cold smoke.
► Glazing
Glazing your Ham adds a touch of sweetness and a nice sheen. It's totally optional, but to me the glaze is the
Pièce de résistance; that final touch that takes your ham to the "Wow" level!
I like to start glazing when the Ham's internal temp reaches about 140° or so; any sooner and the glaze will
most likely burn. Brush it on every 15 - 30 minutes until the ham reaches 165°.
My two favorite glazes:
• Brown Sugar & Pineapple juice
• Maple Syrup.
A few other glaze ideas:
• Brown Sugar & almost any fruit juice (Orange, Apple, etc.)
• Brown sugar, allspice & a bit of water.
• Cola, simmered & reduced.
• Honey thinned with just a little water.
• Maple & Brown sugar
• Maple Syrup or honey with just a touch of a cayenne - Killer!
• Brown Sugar & Bourbon or Rum
Mix your glaze ingredients in a small pan & simmer, stirring until it's a syrup-like consistency.
► Finish Temp
Once your ham has reached an I.T. of 165°, the ham is finished cooking and can be pulled from the
smoker/oven and allowed to rest before slicing.
► The Hardest Part - Resting the Ham!
The smell of your ham wafting through your house is going to make you and your guests hungry. LET IT!!! After
all your work, don't mess up now by slicing it too soon; let it rest for at least 30 - 45 minutes! This allows
time for the fibers to relax so the ham is tender and stays juicy when you slice it.
Enjoy your ham and all the accolades that go along with it. I promise, once you cure & smoke your
own ham, you'll never want to buy a mass-produced-store-bought ham again!
Thanks, and I hope you find this useful!
Cliff
Last edited by TentHunter; 04-04-2015 at 07:13 AM.
<><
MAK 1 Star General #651 - 2014 Model
former owner - MAK 1 Star General #171
22.5" Weber Performer with Stoven Pellet Grill attachment
27 + year old 22.5" Weber Kettle (still works fine)
Modified Horizontal Offset Smoker - used mainly for cold smoking.
Blog this Post Reply Reply With Quote
12-21-2013, 01:10 PM #7
TrickyDick WOW! Really nice job Cliff!
Thanks!
Senior Member
TD
Join Date: Feb 2012
Posts: 556
Blog this Post Reply Reply With Quote
06-02-2014, 02:19 PM #8
Tailback
Fantastic post!
Junior Member
Join Date: Mar 2011 You really made a top notch post here. I've been on a leave of absence from this board for awhile, now that
Posts: 18 Summer is here I'm back!
I was going to make a ham for this Easter, but then all the relatives decided to go to California and leave us
stranded. Next time I do a ham I'll definitely come back to this post for advice.
Blog this Post Reply Reply With Quote
12-02-2014, 05:54 AM #9
octanejunkie Great thread!
Junior Member
I read and followed your instructions to the letter and produced a wonderfully brined, smoked ham for
Join Date: Dec 2014 thanksgiving!
Posts: 1
Moving on to brining other cuts now (like loin, shoulder, chops, etc) any advice re brining times for smaller
cuts?
Blog this Post Reply Reply With Quote
01-12-2015, 01:48 PM #10
Basher Does anybody have the rate for how long you do the brine. The rate (picture) is no longer here. Thanks
Junior Member
Join Date: Jan 2015
Posts: 1
Blog this Post Reply Reply With Quote
+ Reply to Thread Page 1 of 5 1 2 3 ... Last
Quick Navigation Searching for the Cure Top
Quick Reply
My Photos
Post Quick Reply Go Advanced Cancel
« Previous Thread | Next Thread »
Tags for this Thread
None
View Tag Cloud Add / Edit Tags
Bookmarks Posting Permissions
Digg You may post new threads BB code is On
del.icio.us You may post replies Smilies are On
You may post attachments [IMG] code is On
StumbleUpon
You may edit your posts [VIDEO] code is On
Google HTML code is Off
Forum Rules
Contact Us PelletSmoking.com Archive Web Hosting Top
All times are GMT -8. The time now is 02:26 PM.
