2018 C ATALOGUE

MEASUREMENT
INSTRUMENTS

Made
to M e a su r e

ROVER LABORATORIES S.p.A.

Via Parini 2, 25019 Sirmione (BS) Italy

Tel. +39 030 9198 1 • Fax +39 030 990 6894

info@roverinstruments.com • www.roverinstruments.com V 8 Mar 18

NEW GENERATION

DOCSIS
CATV

75Ω
“F”
Connector

50Ω
“N”
Connector

S2M

C2

T2
2
of INSTRUMENTS

IPTV OPTIC
ANALYZER ST/SC/FC
T2 MI
approved
ANALYZER
ASI T.S.
ANALYZER

AVIONIC ALUMINIUM BODY

3
 REMOTE CONTROL

3G/4G

LAN

4
& TOTAL CONNECTIVITY
A/V
JACK USB
B USB
A
IP/LAN
OPTIC

N
F
GPS
ASI
IN/OUT
HDMI

5
 ADVANCED

NEW NAVIGATION
ICON MENU
A new user interface very intuitive.
It allow the fast selection of the
function and of the measure you
need with one click.

WI-FI ANALYSIS
Analyze all the wi-fi networks in the building
and than check the power of the signal.

6
FUNCTIONS

WIDE BAND RECEPTION

Compatible with the new systems WIDE
BAND LNB, our equipments are able to
measure the full band from 230 to 2.340 MHz.

SATELLITE FAST TEST

Thanks to this function the user can check
up to 4 satellite transponders quality at the
same time. Also usefull to check the correct
function of the LNB in all the polarities.

7
 ADVANCED

NETWORK DELAY

The Network Delay measurement is

indispensable when operating in DVB-T
SFN networks. It measures the Transport
Stream Network Delay and checks that
it does not exceed the TS MIP packet
maximum value.

etr 101-290
t.s. analyzer

The meter has a built-in TS analyzer

that provides complete ETR101-290
priority 1–2–3 alarms monitoring.
It analyses the transport streams, either
demodulated from one of the RF inputs,
injected via the ASI input connector or
received via the GbE interface.

8
FUNCTIONS

gps

The meter has an internal GPS receiver.

It allows you to carry out the analysis of a GPS
reception antenna quality. It also provides time
reference for the Network Delay function and location
data when performing on-field measurement loggers
when driving in a car or standing on.
This is practical for Network Operators because it
allows signal verification coverage in specific areas
and simulaneous comparison of several signals.

barscan
level graph

Simultaneously check the level/power

of all analog & digital channels.
In TV standard canalization the meter displays the level/
power of all channels as a bar graph.
In AUTOMEMORY or MANUMEMORY PLAN the meter
displays only the memorized channels and distinguishes
Analog and Digital signals using two different colours
(shows audio level).

9
 ADVANCED

MER VS CARRIER
The MER measurement, performed for
every single carrier in a DVB-T & T2 COFDM
mux, is an indispensable tool to spot the
impairments on the received digital signal.

MER vs CARRIER Reverse visualization.

13°
Looking for HOTBIRD
SAT EXPERT
FUNCTION
The “SATEXPERT SW” function, is a valuable aid for a
fast satellite antenna pointing to a wanted satellite.

Through text messages, which appear from time to

time on the screen, the measuring instrument will
indicate in which direction to move the satellite
dish, to the east or to the west, until you reach the
wanted satellite.

Example pointing Hot Bird 13 ° East

The tool informs you that the dish is
oriented on the correct satellite via the
message HBIR13 FOUND!

Found HOTBIRD 13° 10

FUNCTIONS

OPTIC
The meter has an internal optical to RF converter.
Can measures the OPTICAL POWER and OPTICAL
ATTENUATION, carries out RF measurements
(from the optical input), decodes the services and
visualizes the spectrum.

Fiber optic and remote

power supply cable connection FIBRA OTTICA
INTERCHANGEABLE OPTICAL CONNECTOR DC

FC

ST

SC
Measurements and pictures Spectrum visualization

LONG TERM CHANNEL

LOGGER OR QoS
Record the Quality of Service (QoS) using the WEEKLY
CHANNEL LOGGER SW application (supplied with the ROVER
HD Series).
This useful tool monitors and records the trend of the main
parameters of a digital signal over time (from 30 minutes to 7
days): TV, Cable, Satellite, Radio or FM (DAB option available
for specific models).
It is excellent for reception problems that occur occasionally.
The application allows you to measure, store and display (locally or remotely*) the
parameters of the digital signals under test: DVB-S/T/C = Power, MER, ERROR, bBer,
aBer; DVB-S2/T2/C2 = Power, MER, ERROR, aBer, Lber, PER, Ldcp.
Each recorded parameter is graphically represented on the display using different
colors for easy identification.

11
 N E W RAN G E
HD TAB 4 HD TAB 4 HD TAB 7 HD TAB 7 HD TAB 700 HD TAB 700 HD TAB 900 HD TAB 9 HD TAB 9

v8
Easy Touch Lite Evo Plus Plus Plus
NB: The MENU
(texts & graphics)
can change,
without advice,
from model to model
and related with the
SW version.

FREQ. RANGE 44 - 2.250 MHz 44 - 2.250 MHz 4 - 2.600 MHz 4 - 2.600 MHz 4 - 2.600 MHz 4 - 2.600 MHz 4 - 2.600 MHz 4 - 2.600 MHz 4 - 2.600 MHz
LEVEL RANGE 30 - 100 dBµV 30 - 100 dBµV 28 - 130 dBµV 28 - 130 dBµV 28 - 130 dBµV 28 - 130 dBµV 28 - 130 dBµV 28 - 130 dBµV 28 - 130 dBµV
STANDARD DVB-T/S/S2/C/C2 • (no C2) • (no C2) • (no C2) • (no C2) • (no C2) • (no C2) • (C2 opt.) • (C2 opt.) • (C2 opt.)
STANDARD DVB-T2/T2 LITE – opt. opt. opt. opt. opt. opt. opt. opt.
STANDARD DVB-S2 MULTISTREAM – – • • – – • • •
WIDE BAND IN – – – – opt. opt. • – •
DAB – – opt. opt. – – opt. opt. opt.
CAM C.I. – – – – – – – • •
LTE ANALYSIS – – • • • • • • •
OPTICAL INPUT – – opt. • – • • opt. •
H265 HEVC – – – – – – opt. opt. opt.
SAT EXPERT – – opt. • • • • • •
TS ANALYZER ETR 101 290 – – – – – – – opt. •
MER VS CARRIER – – opt. • • • • • •

12
MER • • • • • • • • •
CONSTELLATION • ONLY CATV/SAT • • • • • • • •
DiSEqC - dCSS - SCR • • • • • • • • •
REFLECTOMETER – – opt. • opt. opt. • • •
MINISPECTRUM – – – – – – – opt. •
ECHOES ANALYSIS – – • • • • • • •
ANALOG TV MEAS only MEAS & PICT MEAS only MEAS & PICT MEAS only MEAS & PICT MEAS & PICT MEAS & PICT MEAS & PICT
WI-FI – – – – – – opt. – –
GPS – – – – – – – opt. opt.
NOISE MARGIN GRAPH – – • • • • • • •
IPTV – – – – – – opt. opt. opt.
ASI IN-OUT – – – – – – – opt. •
LAN – – – • – • • • •
REMOTE MONITORING – – – opt. – opt.
CROSS REFERENCE

• • •
DRIVE TEST – – – – – – – opt. opt.
DOLBY AC3DD + opt. opt. opt. opt. opt. opt. opt. opt. opt.
VIDEO IN RCA (CVBS) – • • • • • • • •
HDMI OUT – – – • – – • • •
USB B B A+ B A+ B A+ B A+ B A+ B A+ B A+ B
TFT 4,3 ” 4,3 ” Touch 7 ” Touch 7 ” Touch 7 ” Touch 7 ” Touch 9 ” Touch 9 ” Touch 9 ” Touch
TOUCH SCREEN DISPLAY – • • • • • • • •
WEIGHT & DIMENSIONS 1 Kg /12 x 18,5 x 4,5 cm 1 Kg /12 x 18,5 x 4,5 cm 2 Kg /14 x 24 x 4 cm 2 Kg /14 x 24 x 4 cm 1,4 Kg /13 x 25,5 x 4 cm 1,4 Kg /13 x 25,5 x 4 cm 1,8 Kg /15,5 x 27 x 4 cm 2,6 Kg /29 x 17 x 5,5 cm 2,6 Kg /29 x 17 x 5,5 cm
BATTERY CAPACITY 2,2 A h 2,2 A h 2,2 A h 4Ah 2,2 A h 2,2 A h 4Ah 6Ah 6Ah
BAG EASY BAG EASY BAG RUGGED BAG RUGGED BAG EASY BAG RUGGED BAG RUGGED BAG RUGGED BAG RUGGED BAG
DOCSIS DOWN STREAM DOWN STREAM DOWN STREAM DOWN STREAM DOWN STREAM DOWN STREAM DOWN STREAM DOWN STREAM DOWN STREAM
NOTES

13
 Easy & Touch
THE MOST EASY, ACCURATE & COMPLETE
COMBINED SAT, TV & CATV FIELD METER TOUCH

TFT 4,3”
16:9 Display

Touch
EXCLUSIVE DUAL Mechanical
COMMANDS Direct Keys & Encoder

• ACCURATE & EASY TO USE • AUTOMEMORY

& AUTOQUALITY
• DVB-S/S2, DVB-T/T2 (opt.), DVB-C
• SPECTRUM
• ALL DIGITAL MEASUREMENTS
WITH MEMORY PEAK
• Diseqc & scr dCSS
• ROBUST METAL HOUSING
• full MPEG 2 - 4 SD
• RAIN PROOF BAG
& HD PICTURES
• LONG DURATION
• ANALOG TV & VIDEO INPUT
LI-PO BATTERIES
OPTIONS: check the Cross reference on page 12.

14
 ISDB-T – ATSC – GB20600

MAIN FUNCTIONS
MEASUREMENTS & SPECTRUM ANALYSIS
• Frequency Range: TV 44 to 880 MHz, SAT 930 to 2.250 MHz. Level accuracy: 3 dB.
• Input Impedance: 75 ohm (interchangeable “F” connector).
• Power range Meas.: TV and SAT from 30 to 100 dBµV, 120 dBµV with ext. attenuator.
• Net-id.
• Spectrum with MAX HOLD: full spect. capabilities with memory peak, variable span and automatic
reference level.
• Constellation: for TV/CATV and SAT signals.
• Digital Meas: Digital Power, MER, BER, PER.
• Analog Meas and Picture: Analog level, V/A ratio.
• Quality: Digital Auto quality Test.
• Digital Pictures: MPEG2-4 SD & HD pictures with Service List & Video bit Rate.
• TV Memory Plan: World Wide countries with related channels plans pre-memorized.
• SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
• Manual Memory Plan: Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard.
• Loggers: TV, SAT & combined with stop & go function.
• Free SMART PC interface program and FW upgrades.
• OPTIONS*: check the Cross reference on page 12.
GENERAL SPECIFICATIONS
• 4,3” TFT TOUCH display: 16:9 high resolution.
• DC voltage at RF input: 5 - 12 - 18 - 24 V, DiSEqC, SCR, dCSS.
• Battery: Rechargeable Li-Po battery pack, 3 hour duration.
• Power supply & Battery charger: 12/18 Vdc, 1A.
• USB PC Interface: For SW upgrade and memory plan management.
• Housing: Metal box and rain proof bag.
• Size: H 12,0 x W 18,5 x D 4,5 mm (meter only).
• Weight: 1 Kg.
• Easy bag supplied:(elite bag optional).

* Some options must be requested when ordering the instrument.

MEASUREMENT EXAMPLES

DVB-S2 Constellation DVB-T2 Constellation (opt.)

TV Spectrum SAT Spectrum Service list & picture

15
 Lite & Evo
THE MOST ADVANCED & ACCURATE TABLET ANALYZER

TFT 7” OPTIC INCLUDED

16:9 Display

Touch
EXCLUSIVE DUAL Mechanical
COMMANDS Direct Keys & Encoder

• FREQ. RANGE 4–2.610 MHz

• DVB–S/S2 MULTISTREAM • POWER METER
• DVB–T, T2/T2 LITE Mult. PLP(opt.) & C/C2 OPTIC • POWER LOSS
• ISDB–T (6/8 MHz)–ATSC–GB20600 • POWER GRAPH
FC-ST-SC
• ANALOG TV interchangeable • SAT, TV & CATV SPECT & MEAS
RF IN • FM RADIO connector

• DAB & DAB +

• REAL TIME SPECTRUM (4-2.610 MHz) • SAT EXPERT
75Ω
“F” • GSM BAND APPs • MER vs CARRIER
Connector • LTE ANALYZER • REFLECTOMETER
• SAT SCR, DiSEqC & dCSS
• 7 DAYS CHANNEL MONITORING
• LOGGER
MONITO- • REMOTE PC/TABLET CONTROL
LAN • REMOTE CONTROL
RING • USB ON THE GO FOR LONG
TERM LOGGING
• QOS 24 h with NMS
OPTIONS: check the Cross reference on page 12.

SPECIAL FUNCTIONS
• Exclusive patented ROVER AUTODISCOVERY system: automatically detects and selects analog and
digital COFDM/QAM TV signals in both measurement and spectrum mode.
• HELP function: automatically identifies all the signals with digital modulation SAT, TV and CATV.
• Automatic Assistant: Signal Quality analysis, Channel Scan memorization.
• Barscan TV & CATV function from 10 to 100 channels on one screen.
• Buzzer & Noise Margin real time graph. • Reflectometric measurements APP
• Exclusive included APP: SAT Expert. • LAN Interface: for remote web browser internet
• MER versus CARRIER Monitoring with opt. APP.

16
 ISDB-T – ATSC – GB20600

MAIN FUNCTIONS
MEASUREMENTS & SPECTRUM ANALYSIS
• Freq. Range: TV and CATV TUNER, extended band, 4-1000 MHz; SAT TUNER, extended band, 930-2.610
MHz; GSM extended band, 860-1.000 MHz for telephone repeater installation.
• Input Impedance: 75 ohm (interchangeable “F” connector).
• Digital Meas: Digital Power, MER, BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER.
• Analog Meas & Picture: Analog level, V/A ratio.
• Power range Meas.: TV 28 to 130 dBµV, SAT 30 to 130 dBµV.
• Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position.
• Fast spectrum with MAX HOLD: full spect. capabilities with memory peak, variable span and
automatic reference level.
• Constellation: for TV/CATV and SAT signals.
• Echoes, Pre-echoes, Micro-echoes: Representation in real Time.
• Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL.
• Digital Pictures: MPEG2-4 SD & HD pictures with Program List, Audio Video PIDs, LCN, Video bit Rate
all on one screen.
• TV Memory plan: World Wide countries with related channels plans pre-memorized.
• SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
• Manual Memory Plan: Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard.
• Loggers: TV, SAT & combined with stop & go function.
• Audio: AAC supplied, DOLBY (opt.).
• Optical Power meter: with interchangeable FC-ST-SC connector for fiber optic testing (FTTH & FTTX).
• Free SMART PC interface program and FW upgrades.
• OPTIONS*: check the Cross reference on page 12.
GENERAL SPECIFICATIONS
• 7” TFT TOUCH display: 16:9 high resolution.
• DC voltage at RF input: 5 - 12 - 18 - 24 V, DiSEqC, SCR, dCSS.
• Battery: Li-Po battery pack, 4 h duration & Battery Test function (2 h for Lite version)
• Power supply & Battery charger: 12 Vdc, 1A.
• USB PC Interface: For SW upgrade and memory plan management.
• USB PC Interface: For storage memory stick.
• Housing: Metal box and padded bag.
• Weight: only 2 Kg. Size: H 14,0 x W 24,0 x D 4,0 cm (meter only).
* Some options must be requested when ordering the instrument.

MEASUREMENT EXAMPLES

DVB-T2 (opt.) rotated Constellation ECHO MEASUREMENT in SFN networks, DVB-S2 multistream Constellation
256 QAM mod., on the right relative with impulse response in real time, 8PSK mod., on the right relative
modulation parameters & M-PLP green area shows the guard interval modulation parameters & ISSY

Spectrum TV 100 MHz span LTE Interference Autotest Satellite spectrum with 500 MHz SPAN

17
 HD TAB 700 & 700 Plus

PR
EL
IM
IN
A
RY
THE NEW GENERATION OF TABLET ANALYZERS

!
TFT 7”
N
O
16:9 Display
SO
E
BL
A
IL
A

NEW
AV

OPTIC

WIDE
BAND

Touch
EXCLUSIVE DUAL Mechanical
COMMANDS Direct Keys & Encoder

• POWER METER

• FREQ. RANGE 4–2.610 MHz OPTIC •

•
POWER LOSS
POWER GRAPH
• DVB–S/S2 SC • SAT, TV & CATV SPECT & MEAS
connector
• DVB–T, T2/T2 LITE Mult. PLP(opt.) & C/C2
• ISDB–T (6/8 MHz)–ATSC–GB20600 • SAT EXPERT

RF IN
• ANALOG TV APPs • MER vs CARRIER
• REAL TIME SPECTRUM (4-2.610 MHz) • REFLECTOMETER

• GSM BAND
75Ω • 7 DAYS CHANNEL MONITORING
“F” • LTE ANALYZER • LOGGER
Connector
• SAT SCR, DiSEqC & DCSS MONITO- • USB ON THE GO FOR LONG
TERM LOGGING
• WIDE BAND RING
• QOS 24 h with NMS
OPTIONS: check the Cross reference on page 12. • REMOTE CONTROL (HD TAB 700 Plus)

SPECIAL FUNCTIONS
• Exclusive patented ROVER AUTODISCOVERY system: automatically detects and selects analog and
digital COFDM/QAM TV signals in both measurement and spectrum mode.
• HELP function: automatically identifies all the signals with digital modulation SAT, TV and CATV.
• NEW: Exclusive Easy navigation menu.
• Automatic Assistant: Signal Quality analysis, Channel Scan memorization.
• Barscan TV & CATV function from 10 to 100 channels on one screen.
• Buzzer & Noise Margin real time graph. • LAN Interface: for remote web browser internet
• MER versus CARRIER Monitoring with opt. APP.
• Reflectometric measurements APP

18
 ISDB-T – ATSC – GB20600

MAIN FUNCTIONS
MEASUREMENTS & SPECTRUM ANALYSIS
• Freq. Range: TV and CATV TUNER, extended band, 4-1250 MHz; SAT TUNER, extended band,
930-2.610 MHz; GSM extended band, 860-1.000 MHz for telephone repeater installation.
• Input Impedance: 75 ohm (interchangeable “F” connector).
• Digital Meas: Digital Power, MER, BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER.
• Analog Meas & Picture: Analog level, V/A ratio.
• Power range Meas.: TV 28 to 130 dBµV, SAT 30 to 130 dBµV.
• Net-id on board: Net-Id, NID, TSID, LCN, SAT Orbit Position.
• Fast spectrum with MAX HOLD: full spect. capabilities with memory peak, variable span and
automatic reference level.
• Constellation: for TV/CATV and SAT signals.
• Echoes, Pre-echoes, Micro-echoes: Representation in real Time.
• Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL.
• Digital Pictures: MPEG2-4 SD & HD pictures with Program List, Audio Video PIDs, LCN, Video bit Rate
all on one screen.
• TV Memory plan: World Wide countries with related channels plans pre-memorized.
• SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
• Manual Memory Plan: Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard.
• Loggers: TV, SAT & combined with stop & go function.
• Audio: AAC supplied, DOLBY (opt.).
• Optical Power meter: with SC connector for fiber optic testing (FTTH & FTTX) (opt. in HD TAB 700).
• Free SMART PC interface program and FW upgrades.
• OPTIONS*: check the Cross reference on page 12.
GENERAL SPECIFICATIONS
• 7” TFT TOUCH display: 16:9 high resolution.
• DC voltage at RF input: 5 - 12 - 18 - 24 V, DiSEqC, SCR, dCSS.
• Battery: Li-Po battery pack, 2 h duration.
• Power supply & Battery charger: 12 Vdc, 1A.
• USB PC Interface: For SW upgrade and memory plan management.
• USB PC Interface: For storage memory stick.
• Housing: Metal box and bag elite (Easy bag in HD TAB 700).
• Weight: only 1,4 Kg. Size: H 25,5 x W 13,0 x D 4,0 cm (meter only).

* Some options must be requested when ordering the instrument.

MEASUREMENT EXAMPLES

New Icon Navigation Menu New constellation diagram

Wide Band Measure and New Meas. & Pict. Super fast SAT FINDER
spectrum
19
 HD TAB 900 Plus

PR
EL
IM
IN
A
RY
THE NEW GENERATION OF TABLET ANALYZERS

TFT 9”
OPTIC INCLUDED 16:9 Display

NEW

HEVC
H265

WIDE
BAND

Touch
EXCLUSIVE DUAL Mechanical
COMMANDS Direct Keys & Encoder

• FREQ. RANGE 4–2.610 MHz

• DVB–S/S2 MULTISTREAM UHD - 4K • H265
• HIGH EFFICIENCY VIDEO CODING
• DVB–T, T2/T2 LITE Mult. PLP(opt.) & C/C2 HEVC • 4K ULTRA HD
• ISDB–T (6/8 MHz)–ATSC–GB20600 *May 2018
• ANALOG TV • POWER METER
• FM RADIO • POWER LOSS
RF IN • DAB & DAB + OPTIC • POWER GRAPH
• REAL TIME SPECTRUM (4-2.610 MHz) SC connector
• SAT, TV & CATV SPECT & MEAS

75Ω • GSM BAND • SAT EXPERT

“F” • LTE ANALYZER • MER vs CARRIER
Connector
• SAT SCR, DiSEqC & DCSS APPs •
•
REFLECTOMETER
WI-FI
• WIDE BAND
• HEVC

• REMOTE CONTROL • 7 DAYS CHANNEL MONITORING

LAN • HTTP • LOGGER
MONITO- • REMOTE PC/TABLET CONTROL
RING • USB ON THE GO FOR LONG
TERM LOGGING
OPTIONS: check the Cross reference on page 12. • QOS 24 h with NMS

SPECIAL FUNCTIONS
• Exclusive patented ROVER AUTODISCOVERY system: automatically detects and selects analog and
digital COFDM/QAM TV signals in both measurement and spectrum mode.
• NEW: Exclusive Easy navigation menu.
• HELP function: automatically identifies all the signals with digital modulation SAT, TV and CATV.
• Automatic Assistant: Signal Quality analysis, Channel Scan memorization.
• Barscan TV & CATV function from 10 to 100 channels on one screen.
• Buzzer & Noise Margin real time graph. • Reflectometric measurements APP
• Exclusive included APP: SAT Expert. • LAN Interface: for remote web browser internet
• MER versus CARRIER Monitoring with opt. APP.

20
 ISDB-T – ATSC – GB20600

MAIN FUNCTIONS
MEASUREMENTS & SPECTRUM ANALYSIS
• Freq. Range: TV and CATV TUNER, extended band, 4-1250 MHz; SAT TUNER, extended band, 930-2.610
MHz; GSM extended band, 860-1.000 MHz for telephone repeater installation.
• Input Impedance: 75 ohm (interchangeable “F” connector).
• Digital Meas: Digital Power, MER, BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER.
• Analog Meas & Picture: Analog level, V/A ratio.
• Power range Meas.: TV 28 to 130 dBµV, SAT 30 to 130 dBµV.
• Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position.
• Fast spectrum with MAX HOLD: full spect. capabilities with memory peak, variable span and
automatic reference level.
• Constellation: for TV/CATV and SAT signals.
• Echoes, Pre-echoes, Micro-echoes: Representation in real Time.
• Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL.
• Digital Pictures: MPEG2-4 SD & HD pictures with Program List, Audio Video PIDs, LCN, Video bit Rate
all on one screen.
• TV Memory plan: World Wide countries with related channels plans pre-memorized.
• SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
• Manual Memory Plan: Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard.
• Loggers: TV, SAT & combined with stop & go function.
• Audio: AAC supplied, DOLBY (opt.).
• Optical Power meter: with SC connector for fiber optic testing (FTTH & FTTX).
• Free SMART PC interface program and FW upgrades.
• OPTIONS*: check the Cross reference on page 12.
GENERAL SPECIFICATIONS
• 9” TFT TOUCH display: 16:9 high resolution.
• DC voltage at RF input: 5 - 12 - 18 - 24 V, DiSEqC, SCR, dCSS.
• Battery: Li-Po battery pack, 3 h duration & Battery Test function
• Power supply & Battery charger: 12 Vdc, 2A.
• USB PC Interface: For SW upgrade on-line and memory plan management.
• USB PC Interface: For storage memory stick.
• Housing: Metal box and bag elite. Padded bag optional.
• Weight: only 1,8 Kg. Size: H 27,0 x W 15,5 x D 4,0 cm (meter only).
* Some options must be requested when ordering the instrument.

ICON MENU

New Icon Navigation Menu Wi-Fi Analyzer New constellation diagram

Wide Band Measure and New Meas. & Pict. Super fast SAT FINDER
spectrum
21
 HD TAB 9 & 9 Plus
THE PROFESSIONAL & ACCURATE TOUCH SCREEN ANALYZER

UHD – 4K – HEVC*
utomatic , Fast & Easy-to -Use
A
9”
High
Brightness
16:9 Display

FULL Touch EXCLUSIVE DUAL Mechanical

Excludable COMMANDS Keys & Encoder

• H265
UHD - 4K
• HIGH EFFICIENCY VIDEO CODING
• FREQ. RANGE 4–2.610 MHz HEVC • 4K ULTRA HD
*May 2018
• DVB–S/S2 MULTISTREAM
• IP to ASI DENCAP.
• DVB–T, T2/T2 LITE Mult. PLP(opt.) & C/C2
IP TV • ASI to IP ENCAP.
50Ω • ISDB–T (6/8 MHz)–ATSC–GB20600 • IPTV ANALYZER
“N” • ANALOG TV
Connector • T.S. LIVE STREAMING
• FM RADIO • T.S. RECORDING
• DAB & DAB +
LAN • REMOTE CONTROL
RF IN • REAL TIME SPECTRUM (4–2.610 MHz)
• SNMP & HTTP

• MINI SPECT. with PICTURES • POWER METER

75Ω
• GSM BAND
OPTIC • POWER LOSS
“F” • POWER GRAPH
Connector
• LTE FILTER FC-ST-SC
interchangeable • SAT, TV & CATV SPECT & MEAS
connector
• ITU QUALITY COVERAGE
• POSITION LOGGING
• LTE analyzer
GPS • 10 MHz & 1 PPS TIME REFERENCE
• T2 MI ANALYZER • GPS ANTENNA QUALITY TEST
• ASI INPUT/OUTPUT
• 7 DAYS CHANNEL MONITORING
• DVB–T SFN N etwork D elay meas
ASI T.S. • ETR 101–290 T.S. ANALYZER MONITO-
• LOGGER WITH GPS
• REMOTE PC/TABLET CONTROL
• RECORD/READER RING • USB ON THE GO FOR LONG TERM
LOGGING
• PRODRIVE TEST
OPTIONS: check the Cross reference on page 12. • QOS 24 h with NMS

22
 ISDB-T – ATSC – GB20600

MAIN FUNCTIONS
SPECIAL FUNCTIONS
• ETR 101-290 T.S. Analyzer.
• Exclusive patented ROVER AUTODISCOVERY system: auto-matically detects and selects analog and
digital COFDM/QAM TV signals in both measurement and spectrum mode.
• HELP function: automatically identifies all the signals with digital modulation SAT, TV and CATV.
• Automatic Assistant: Signal Quality analysis, Channel Scan memorization.
• Barscan TV & CATV function from 10 to 100 channels on one screen.
• Buzzer & Noise Margin real time graph for digital signals microinterruptions.
• Reflectometric measurements APP.
• PRODRIVE TEST: REMOTE MONITORING and LOGGING: TS, measurements, spectrum, thumbnails.
• Optical Input signals.
• SATELITE: SAT SCR, DiSEqC, SCR & dCSS, Motorized antenna, Dual LNB, SAT FINDER, SAT EXPERT
• Custom Channel Plans: 25 (199 ch. per plan), Programmable TV, SAT (or combined TV/SAT)
by PC or Local Keyboard.
• Loggers: TV, SAT & combined with stop & go function.
• SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
• Free SMART PC interface program and FW upgrades.
• OPTIONS*: check the Cross reference on page 12.
SPECIFICATIONS: MEASUREMENTS & SPECTRUM ANALYSIS
• Frequency Range: TV, CATV & Radio: 4-1000 MHz (TAB 9) 4-1250 MHz (TAB 9 PLUS);
SAT: 950–2610 MHz.
• Frequency Resolution: TV & CATV 25 KHz; SAT: 5 or 1 MHZ selectable.
• Power range Meas.: TV 28 to 130 dBµV, SAT 30 to 130 dBµV.
• Digital Meas: Digital Power, MER (32 to 42 dB depending on modulation), BER, PER, LDPC, BCH, Noise
Margin, MER versus CARRIER.
• Analog Meas & Picture: Analog level, V/A ratio.
• Measurement Resolution: 0.1 dB.
• Level Measurement Accuracy: 1 dB typ. (2 dB max.)
• Resolution Filter Bandwidth: TV & CATV: 100 KHz @ -3 dB; SAT: 1 MHz or 5 MHz @ -3 dB selectable.
• Constellation: for TV/CATV and SAT signals.
• Spectrum: Real time, Max Hold and spectrum memorization with real time compare function.
• Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position.
• Echoes, Pre-echoes, Micro-echoes: Representation in real Time.
• Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL.
• TS: TR 101-290 v1.2.1 ANALYSIS, SI, PMT, bit rate, network delay, MPEG services and tables.
• IPTV: measurements and picture decoding.

OPTICAL MEASUREMENTS
• FC-ST-SC interchangeable input connectors.
• Automatic loss calculation.
• Wavelengths (nm): 1310, 1490, 1550 .
• Range: -25 to 10 dBm.
• Resolution: 0.1 dB.
• Accuracy: +/- 0.5 dB.
• Optical to RF conversion.

23
 ISDB-T – ATSC – GB20600

COMM. PORTS AND OUTPUTS

• RF Input : 75 ohm (interchangeable “F”).
• LAN: RJ45 10/100 base Ethernet.
• USB 2.0: Type B (PC Interface).
• USB 2.0: Type A (USB drive).
• Digital Pictures: MPEG2-4 SD & HD pictures with Program List, Audio Video PIDs, LCN, Video bit Rate all on one screen.
• Audio: AAC supplied, DOLBY (opt.).
• Asynchronous Serial Interface (ASI): ASI input on 75Ω BNC connector, ASI output on 75Ω BNC connector.
• Audio / Video: Composite A/V input, HDMI output.
• Common Interface: PCMCIA slot for single/multi-service CAM modules.

GENERAL SPECIFICATIONS
• 9” TFT TOUCH display: 16:9 high resolution and high brightness.
• Power Supply: Built in LiPo battery with up to 6 hours duration & Battery Test function.
• DC voltage at RF input: 5 - 12 - 18 - 24 V, DiSEqC, SCR, dCSS.
• PC Interface: USB.
• Front-Panel: Alpha numeric keypad.
• Power Save: TFT backlight timer, brightness adj.
• PC Management: SMART software.
• Weight: only 2,6 Kg with batteries.
• Size: H 29,0 x W 17,0 x D 5,5 cm.
• Housing: Aluminium and Steel and padded bag.

* Some options must be requested when ordering the instrument.

MEASUREMENT EXAMPLES

MER vs CARRIER: normal visualization Spectrum SAT 500 MHz span Single channel monitoring: 30 minutes

Spectrum TV 100 MHz span DVB-T2 (opt.) rotated Constellation ECHO MEASUREMENT in SFN networks,
256 QAM mod., on the right relative with impulse response in real time,
modulation parameters & M-PLP green area shows the guard interval

ETR 101290 GPS antenna Quality, constellation LTE Interference Autotest

Transport Stream Analyzer & Position.

24
CATV or SAT
INSTRUMENTS
 Sat
THE MOST EASY, ACCURATE & COMPLETE SAT TOUCH METER

TFT 4,3”
16:9 Display

Touch
EXCLUSIVE DUAL Mechanical
COMMANDS Direct Keys & Encoder

• AUTOMEMORY
• ACCURATE & EASY TO USE & AUTOQUALITY
• DVB-S/S2 • SPECTRUM
• ALL DIGITAL MEASUREMENTS WITH MEMORY PEAK

• Diseqc & scr • ROBUST METAL HOUSING

• RAIN PROOF BAG
• full MPEG 2 - 4 SD & HD
PICTURES • LONG DURATION
LI-PO BATTERIES

26
 MAIN FUNCTIONS
MEASUREMENTS & SPECTRUM ANALYSIS
• Frequency Range: SAT 930 to 2.150 MHz. Level accuracy: 3 dB.
• Input Impedance: 75 ohm (interchangeable “F” connector).
• Power range Meas.: SAT 28 to 92 dBµV, 120 dBµV with ext. attenuator.
• Net-id on board.
• Fast spectrum with MAX HOLD: full spect. capabilities with memory peak, variable span and
automatic reference level.
• Constellation SAT.
• Dig. meas: Digital Power, MER, BER, PER.
• Quality: Digital Auto quality Test.
• Digital Pictures: MPEG2-4 SD & HD pictures with Service List, Video bit Rate.
• SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
• Manual Memory Plan: Programmable by PC or Local Keyboard.
• Loggers: with stop & go function.
• Dolby: (opt.).
• Free SMART PC interface program and FW upgrades.
• AVAILABLE OPTIONAL APPs *: HD DOLBY audio (specify when ordering), Elite bag.
GENERAL SPECIFICATIONS
• 4,3” TFT TOUCH display: 16:9 high resolution.
• DC voltage at RF input: 5 - 12 - 18 - 24 V, DiSEqC, SCR, dCSS.
• Battery: Rechargeable Li-Po battery pack, 2 hour duration.
• Power supply & Battery charger: 12 Vdc, 1A.
• USB PC Interface: For SW upgrade and memory plan management.
• Housing: Metal box and rain proof bag.
• Size: H 123 x W 185 x D 44 mm (meter only).
• Weight: 1 Kg.
• Easy bag supplied:(Elite bag optional).
* Some options must be requested when ordering the instrument.

MEASUREMENT EXAMPLES

DVB-S2 Constellation Digital Measurements

SAT Spectrum Service list & picture

27
 MASTER SAT
the NEW frontier: WIDE BAND LNB 230–2.340 MHZ

the
dSCR WIDE BAND
ANALYZER

• WIDE BAND 230 - 2.340 MHz

• Full Logging capabilities
with dSCR (dCSS), SCR & DiSEqC
• SAT EXPERT: the fastest SAT identification APP
• Drives standard & wideband LNBs
• PC Interface for free updates
• Orbit position & programme listing & data
• WiFi Network test (optional)
• MPEG 2-4 with SD-HD Picture
• Free basic SW upgradeable on-line
• Spectrum with MAX HOLD for precise dish alignment

MEASUREMENT EXAMPLES

Z
O
O
M

Main measurements and live picture Navigate to the picture to zoom,

enter to return to measurements

8PSK Constellation Fast spectrum with peak memory “MAX H”

for perfect dish alignment

28
 MAIN FUNCTIONS
DVB-S/S2 (Demodulation) • SOFTWARE (FW) upgrades are available free of
• Frequency band: 230–2340 MHz for standard charge. Check periodically Rover
and Wide Band LNBs. Instruments web site.
• Interchangeable input connector: “F type”. • MEM: Satellite transponder list file (MEM PLAN)
• Power Supply at RF input: OFF, +13, +18 V, upgrades are available free of charge.
22 kHz (0.3 A), DiSEqC, dSCR/SCR, WIDE-BAND Check periodically Rover Instruments web site.
LNB.
• Digital power measurement dynamic range at MEMORY:
RF input: from 30 to 115 typ. dBuV. 99 available Memory Plans & Datalogger
• Noise Margin Measurements. function.
• DVB-S/S2 Symbol Rate setting:
2–45 MS/s, in 1 kS/s steps. POWER SUPPLY:
• Measurement Parameters: • External power supply 12 V 1A.
- bBER up to 2x10–6 (before Viterbi) • Battery 7,2 V 4,3 Ah.
- aBER up to 2x10–8 (after Viterbi) • Built in rechargeable batteries
- MER 2-25 dB resolution 0.1 dB with option for field serviceable module for
- PER 10-2 to 10-7 (DVB S2) battery replacement.
- BCH 10-2 to 10-8 (DVB S2) • Li battery technology, where user serviceable
- LDCP 10-2 to 10-8 (DVB S2) module supported instrument to be supplied
• FEC: DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8; DVB-S2: 1/4, with two battery modules as standard.
1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10. • Battery duration at 25°C:
• Automatic quality test: FAIL, MARGINAL, PASS. - 3 hours in satellite alignment mode
• Noise Margin Measurements: from –1 to 12 dB - >4 hours in Wi-Fi mode where supported
with built in FEC compensation. • Low Battery indicator: with acoustic signaling
• NET. ID. Shows bouquet and transponder and visual indication on graphic display.
names, the encryption system, orbital position • Automatic power management features
and date. - Back panel illumination has user
adjustable time out
AUDIO & VIDEO OUTPUT - Indication of battery status charge
• 4,3” color TFT 16:9 high resolution monitor with • Battery re-charge time: 1 hour for approx. 50%
Auto-Off timer: after 5 or 10 min without use. capacity, <6 hours for full charge.
• MPEG2 & MPEG4 SD & HD. • On-board battery recondition cycle
• Audio decoding: AC3 - EC3 (Dolby Digital - and condition reporting (battery test).
Dolby Digital Plus) opt.; AAC - HEAAC opt. • Meter power off automatically after 5, 10
minutes user selectable, option for
SAT SPECTRUM ANALYSIS user selectable always on.
• Frequency band: 230–2340 MHz.
• Span: 50–100–200–500–FULL - WIDEBAND-LOW DIMENSIONS AND WEIGHT
BAND-HIGH BAND. • H 8,0 x W 22,5 x D 21,5 cm.
• dB/div: 5. • 1.3 kg with batteries, bag and accessories.
• Display dynamic range: >30 dB. • ABS plastic housing rain, dust & shockproof.
• Marker measurement resolution: 0.1 dB.
• Measurement filter bandwidth: 5 MHz at –3 dB. WI-FI (optional)
• Reference level: from 30 to 120 dBμV, • WI-FI network testing: 2.4 GHz and 5 GHz.
from –60 dBmV to +60 dBmV.
• Reference level settings: automatic and ACCESSORIES
manual adjustable. • Carrying protective bag with side pocket bag
• MAX HOLD (peak hold). and shoulder strap.
• TRASF-12V-1A0-G-UK: AC/DC adapter:
SOFTWARE and FIRMWARE: 100V-240V/12 VDC, 1A.
• “SMART” PC interface program for SOFTWARE • CNN-F-0153: interchangeable F - F double
(FW-Firmware) and MEM plan editing is female input connector.
available free of charge on Rover Instruments
web site. Some options must be requested when ordering the instrument.

29
 QAM EXPERT
IT HAS NEVER BEEN SO SIMPLE, ACCURATE & COMPLETE

A well job done

in 3 seconds!

Connect the
CATV socket and
automatically SCAN
the Power and Quality
up-to 140 channels in
blocks of 8 channels.

• Easy to use FULLY AUTOMATIC • Worldwide TV

• Simultaneous Analysis standards
IN BLOCKS OF 8 Digital • LI-PO Long battery
and/or ANALOG channels duration
• Fully automatic MEASUREMENTS • Robust metal HOUSING
• Fast quality measureMENTS • Rain proof bag

MEASUREMENT EXAMPLES

Icon menu 8 digital channels block analysis

Spectrum with Memory Peak DVB-C Measurements

30
 J –83
MAIN FUNCTIONS
MEASUREMENTS & SPECTRUM ANALYSIS
• Frequency Range: 5 MHz to 1.000 MHz.
• Input Impedance: 75 ohm (interchangeable “F” connector).
• Power range MEAS.: 10 to 100 dBµV (-50 dBmV to 60 dBmV) 120 dBµV with ext. attenuator.
• Fast spectrum with MAX HOLD: Full spect. capabilities with peak memory, variable span and
automatic reference level.
• Meas: All digital and analog measurements, see table below.
• Quality FAIL - MARGINAL - PASS: Measuring the quality and the power up-to 140 CHs in blocks of 8
Digital or Analog channels simultaneously.
• Barscan: TV analog and digital bars scan form 10 to 100 channels.
• Memory plan: World Wide countries with related channels plans are pre-memorized.
• Free basic SW upgradeable on-line.

specifications

LEVEL MEASUREMENT & SPECTRUM INGRESS MEASUREMENTS

ANALYSIS • Ingress Scan Spectrum
• Frequency Range: TV, CATV and Radio 5-1000 MHz • Frequency: 5 -65 MHz
• Frequency Resolution: 25 KHz • Level: 5 dBuV to 125 dBuV
• RF Input Impedance: 75 Ω • Accuracy: +/- 2dB
(interchangeable “F” connector)
• BW: 100 KHz @ -3dB
• Dynamic Range: 1 dBuV to 125 dBuV
or -59 to +65 dBmV
LEAKAGE MEASUREMENTS
or -112 to +16 dBm
• Frequency Range:
• Measurement Resolution: 0.1 dB
• 115-140 MHz (USA), 250-490 MHz (EUROPE)
• Level Measurement Accuracy: 1 dB typ. (2 dB max.)
• Resolution: 25 KHz
• A/V Ratio: up to 22 dB, +/- 1.5 dB (2 dB max.)
• S/N Ratio: up to 45dB +/-1.5 dB Max; 45-50dB +/-2dB • Antenna type: selectable
• Resolution Filter Bandwidth: 100 KHz @ -3 dB
• Custom Channel Plans: 25 (199 ch. per plan) GENERAL SPECIFICATIONS
• DC voltage at RF input: 5Vdc.
POWER & DIGITAL MEASUREMENTS • Battery: Rechargeable Li-Po battery
pack, 5 hour duration.
• Frequency Band: 5-1000 MHz
• USB Micro: For battery charge and PC
• Power Meas. Dynamic Range:
interface for SW up-grade and memory
25 to 125 dBµV, -45 to 65 dBmV
plan management.
• BER Measurement: (pre) bBER up to 1 x 10-9
• Housing: Metal box and rain proof bag.
(post) aBER up to 1 x 10-9
• Size: H 95 x W 160 x D 34 mm
• MER Measurement: up to 40 dB (meter only).
(1 dB typ., 2 dB max.)
• Weight: 500 gr.

31
 OMNIA 7000
THE MOST ADVANCED & ACCURATE TABLET ANALYZER

TFT 7”
16:9 Display

Touch
EXCLUSIVE DUAL Mechanical
COMMANDS

• DOCSIS 3.0 (4 x 4 or 8 x 4)
• FREQ. RANGE 5–1.250 MHz
CHANNEL BONDING
• DVB-C – J83B – ATSC – NTSC (US Version)
• OPTICAL INPUT
DOCSIS • 5 to 1.250 MHz FREQ. RANGE
for DOCSIS 3,1 ANALYSIS
• DVB–T, T2/T2 LITE Mult. PLP(opt.) & C/C2 • DOCSIS UPSTREAM TONE
• ANALOG TV GENERATOR 5-65 MHz
• FM RADIO
• DAB & DAB +
RF IN • REAL TIME SPECTRUM (5-1.250 MHz) • POWER METER
• GSM BAND • POWER LOSS
75Ω
“F”
• LTE ANALYZER OPTIC • POWER GRAPH
Connector • INGRESS • CATV SPECT & MEAS
• HUM MEASUREMENTS FC-ST-SC
interchangeable
• OPTIC to RF CONVERTER
• ANALOG SIGNAL/NOISE IN QUITELINE connector
• LEAKAGE MEASUREMENTS

• 7 DAYS CHANNEL MONITORING

• T.S. LIVE STREAMING • LOGGER
• T.S. RECORDING MONITO- • REMOTE PC/TABLET CONTROL
LAN • REMOTE CONTROL RING • USB ON THE GO
• SNMP & HTTP for LONG TERM LOGGING

• QOS 24 h with NMS

OPTIONS: check the Cross reference on page 12.

32
 J –83
MAIN FUNCTIONS

• Frequency range from 5 to 1250 MHz extended CATV • Available with all world-wide channel plans .
and GSM telephone bands.
• Alpha/numeric keypad for direct chan/freq selection.
• Digital RF measurements 5 MHz to 1,25 GHz including
• SMART software PC interface for meter upgrades,
average power/level, pre/post BER, MER versus CARRIER
channel plans and AutoScan testing/logging
(opt.), Noise Margin, spectral analysis, and constellation.
management.
• INGRESS mode, LEAKAGE mode, BARS SCAN and TILT.
• Detects, measures and SHOWS pictures of MPEG 2
• DOCSIS 3.0 upstream and downstream capabilities, 8 and 4 H264 HD High Definition programs.
x 4 channel bonding with automatic lock to CMTS, for
• Automemory, Manual memory & Datalogger functions.
complete modem installation testing for both forward
and return path analysis (opt.). • Barscan TV & CATV function from 10 to 100 channels
on one screen.
• Ping report, Network IP configuration.
• Audio, AAC supplied, DOLBY opt.
• Lost Packet measurements, latency time and PER.
• 7” TFT TOUCH display, 16:9, high resolution.
• DOCSIS upstream tone generator 5–65 MHz.
• Weighs only 1.6 kg, dim: H 14 x L 24 x D 4 cm.
• OPTICAL POWER METER with interchangeable FC-ST-
SC connector for fiber optic testing (FTTH & FTTX) and • LI-POLIMER 4A battery with 4 hr battery capacity.
troubleshooting (opt.).
• Battery test function, to regenerate and measure the
• User definable channel scan testing /logging with batteries and calibrate the battery indicator.
automatic quality analysis: FAIL-PASS-MARG.
• Supplied with transport padded bag, accessories,
• Assisted navigation, memory plans and automatic mains and vehicle battery chargers.
channel scan. • Free SMART PC interface program and FW upgrades.

MEASUREMENT EXAMPLES

VSB constellation, J83-B constellation, Single channel monitoring

on the right relative on the right relative (for example 30 minutes)
modulation parameters modulation parameters

VSB signal, all the J83-B signal, all the TV spectrum in real time, fast and
measurements, picture and measurements, picture and super-fast with memory peak. Detects
settings on one screen settings on one screen and memorizes all the details for you

33
 J –83
SPECIFICATIONS
LEVEL MEASUREMENT & SPECTRUM ANALYSIS • Measurements Include: Level/Power, MER, Pre/Post
• Frequency Range: TV, CATV & and Radio 5-1250 MHz BER, Lost Packet, Transmit Power, Transmitted Packets,
• Frequency Resolution: 25 KHz Received Packets, PER, Latency Min/Max Avg, Channel
• RF Input Impedance: 75 Ω Bonding Upstream Level and IP Status
(interchangeable “F” connector) • MAC Address: Default or user defined
• Dynamic Range: 1 dBuV to 125 dBuV
or -59 to +65 dBmV DOCSIS UPSTREAM & GENERATOR/TESTING
or -112 to +16 dBm • Tone Generator Frequency: 5-65 MHz
• Measurement Resolution: 0.1 dB • Modulation: QPSK, QAM, 8,16,32,64
• Level Measurement Accuracy: 1 dB typ. (2 dB max.) • Typical Range: 8 to 53 dBmV (1 dB typ., 2 dB max.)
• A/V Ratio: up to 22 dB, +/- 1.5 dB (2 dB max.) • Channel Bonding: Up to 4 upstream channels bonding
• S/N Ratio: up to 45dB +/-1.5 dB Max; 45-50dB +/-2dB supported ingress scan spectrum
• Resolution Filter Bandwidth: 100 KHz @ -3 dB • Frequency range: 5-65MHz
• Custom Channel Plans: 25 (199 ch. per plan)
COMM. PORTS
POWER & DIGITAL MEASUREMENTS • DOCSIS 3.0 and RF: F - Female
• Frequency Band: 5-1250 MHz • LAN: RJ45 10/100 Ethernet
• Power Meas. Dynamic Range: • USB 2.0: Type B (PC Interface)
25 to 125 dBµV, -45 to 65 dBmV • USB 2.0: Type A (USB drive)
• BER Measurement: (pre) bBER up to 1 x 10-9
(post) aBER up to 1 x 10-9 GENERAL SPECIFICATIONS
• MER Measurement: up to 40 dB (1 dB typ., 2 dB max.) • Power Supply: Built in LiPo rechargeable battery,
external power supply 12 VDC 1A
OPTICAL MEASUREMENTS • Battery Duration at 25°C: 4 hours
• FC-ST-SC interchangeable input connectors • Size: H 140 x W 240 x D 50 mm (meter only)
• Automatic loss calculation • PC Interface: USB
• Wavelengths (nm): 850,1310, 1490, 1550 • Display: Color LCD 7” (480px x 800px)
• Range: -25 to 10 dBm • Front-Panel: Alpha numeric keypad
• Resolution: 0.1 dB • Power Save: TFT backlight timer, brightness adj.
• Accuracy: +/- 0.5 dB • PC Management: SMART software
• Optical to RF conversion • Standard Accessories:
– Soft carry case and strap
INGRESS & SPECTRUM MEASUREMENTS – USB 2.0 cable
• Ingress Scan Spectrum – AC adapter
• Frequency: 5 -65 MHz – 12V automotive charging cable
• Level: 5 dBuV to 125 dBuV – RF & optical interchangeable connectors
• Accuracy: +/- 2dB – SMART software
• BW: 100 KHz @ -3dB • AVAILABLE OPTIONAL APPs: DVB-T/T2, DOCSIS 3.0
Cable Modem (4X4 or 8X4), Optic Input,  HD DOLBY,
LEAKAGE MEASUREMENTS
HD MER Vs CARRIER, HD COAX Cable Reflectometer,
• Frequency Range:
• 115-140 MHz (USA), 250-430 MHz (EUROPE) HD Remote Control, DVB-C2.
• Resolution: 25 KHz
• Antenna type: selectable WARRANTY
• According to your country’s laws (12 to 24 months)
DOCSIS DOWNSTREAM MEASUREMENTS • All electronic parts, except batteries, bag and damage
• DOCSIS 3.0 Compliant Modem (8x4 CH BONDING)
• Frequency Band: 5-1000 MHz
• Input Impedance: 75 Ω (interchangeable “F”
connector)
• Range: - 45 to + 65 dBmV
Some options must be requested when ordering the instrument.

34
NOTES

35
 & MORE

mod. CNG 70 USB USB High Power white noise

source 4 – 2.500 MHz
SPECIFICATIONS:
• Flatness: 1,5 dB typ. 2 max
• Freq. Range : 4 – 2.500 MHz
• Impedance: 75 Ω, SMB, (50 Ω opt.)
• Noise type : White Gaussian
• PSU: USB, 5 Vdc, 80 mA
• ENR: 70 dB 75 Ω 25°C
• Size: USB stick
• Output power: – 56 dBm (Mesured at
100 KHz spectrum RBW)
Turn your Commercial Spectrum Analyzer into a Scalar Network Analyzer to measure:
ACTIVE DEVICES PASSIVE DEVICES COAX CABLE/REFLECTOMETER
• GAIN • LOSS • LOSS
• FLATNESS • FLATNESS • LENGTH
• BW • BW • SHORT-CIRCUIT distance **
• WSWR * • VSWR * • OPEN CIRCUIT distance **
• Impedance mismatch
* With RF Bridge. ** With simple slide ruler, depending on Cable type

mod. CNG 90 VERY HIGH POWER CALIBRATED

& MODULATED NOISE GENERATOR
SPECIFICATIONS:
• RF Noise Signal : White Gaussian
• Freq. Range : 4-2150 MHz
• CH Power out : 97 dBµV ± 2 @ 8MHz BW
• TV Power out : 83 dBµV ± 2 @ 100KHz BW
• SAT Power out : 88 dBµV ± 2 @ 1MHz BW
• Noise Modulation : 50 Hz Flat (ON/OFF)
• RF Attenuator : 20 dB Flat
• Battery Capacity : 6-8 hours with low battery indication

The CNG 90 is the most powerful hand held noise generator

currently available, in the frequency range from 4 to 2250 MHz,
it allows passive coaxial cable networks testing, also of large size.
With 50 Hz modulation it is possible to measure the network C/N, without switching off the
generator. A built in 20 dB RF flat attenuator also allows you to analyze and measure amplifiers or
active coaxial CATV networks. The CNG 90 can be used in conjunction with any meter or spectrum
analyzer, even from other brands.

mod. MOS 4 MULTIPLE OPTICAL LASER SOURCE

SPECIFICATIONS:
• 1th wave length : 1310 n.m.
• 2th wave length : 1490 n.m. (1625 for USA)
• 3th wave length : 1550 n.m.
• 4th red Light : 650 n.m.
• Optical Connector : interchangeable FC-ST-SC
• Optical Power : 0 dBm Typ
• AWC : Automatic Wave Detection
• Battery Capacity : 4 - 6 hours with low Battery Indicator

The Multiple Optic laser Source “MOS 4” is suitable for any optical network, PON & FTTHx;
Used in combination with ROVER analyzers (fitted with the optical option), and thanks to the AWD,
it allows you to automatically and accurately check the losses for various wavelengths.
Furthermore, thanks to the red laser, the “MOS 4” will also allow the identification of any breaks in
the optical fiber.
36
OTHER SOLUTIONS

RECEIVING - PROCESSING - MONITORING

Close to its customers, and with over 40 years’ experience in professional equipment
design, ROVER Broadcast is a trusted provider of solutions for any broadcaster,
offering a complete range of products for DVB digital TV network reception,
processing and monitoring of digital and analog signals, network coverage analysis
systems and high power optical transmitters.

SAT DVB-S2 RECEIVING/PROCESSING

TV DVB-T2 MONITORING NETWORK PLATFORMS

CATV & SAT LASER OPTICAL TX & RX

w w w . rov e rb ro adc ast .c o m

37
 NETWORK COVERAGE ANALYSIS

mod. HD ProDRIVE TEST

LOGANT
PER/BER MER
GPSANT OMNIANT

POWER
LEVEL

ROVER
RF SIGNAL
ANALYZERS USB

HD PROTAB

Efficient Broadcast DRIVE TEST solution for cost effective,

fast & accurate, terrestrial Broadcast networks coverage analysis.
EXCLUSIVE KIT for DVB-T2 Lite mobile & stationary MULTICHANNEL measurements.

<30 Field Strength Power dBµV >50

<15 MER dB >25
>10-2 PER <10-7
& EFFICENT “Q o s” remote monitoring

mod. HD Probe & NMS

Highly reliable, easy Network Management System to check 24 h Quality of Service
for Radio, TV & SAT signals through multiple HD ROVER meters/probe placed
in your distribution network.
HOW TO FIND US:
in Sirmione, Lake Garda, Italy.
Situated in one of the most beautiful tourist locations in Italy, on Lake Garda, ROVER can be easily reached from
Milan, Bergamo, Verona and Venice airports.
Lake Garda is in the north of Italy, near the borders of Austria, Switzerland and Germany and is in the foothills
of the Alps.
Lake Garda has a micro-climate, tropical in summer and temperate in winter, and where palms, olives, lemons,
oranges, bouganville and even banana trees can grow.
Exploited by the Romans as long ago as 350 a.C., it is now one of the most important lakeside, spa and tourist
resorts in Europe. Please find below photographs of some of the most important tourist attractions in the area.

Catullus roman ruins, 350 b.C. Sirmione Castle, 1.500 a.C. Verona, roman Arena 120 b.C.

MILAN Brescia
(Montichiari)
Verona
(Villafranca)
VENICE
120 Km International Airport International Airport 150 Km

GPS COORDINATES:
45° 27’ 47”N, 10° 36’ 24” E

CERTIFICATES N°
1263 ISO 9001
1264 ISO 14001
ROVER Goods entrance & production ROVER Laboratories and offices 1265 BS OHSAS 18001