Scribd
Upload
489 views1 page

P275HE

The document provides output ratings and technical specifications for two generator models, the P250H and P275HE. It includes: 1) Output ratings for each model in kVA and kW at 380-415V, 50Hz. 2) Definitions of prime power and standby power ratings. 3) Technical data on the engine, alternator, cooling systems, dimensions, and weights of each model. 4) Manufacturing locations and contact information for FG Wilson.

Uploaded by

Namer Haji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
489 views1 page

P275HE

The document provides output ratings and technical specifications for two generator models, the P250H and P275HE. It includes: 1) Output ratings for each model in kVA and kW at 380-415V, 50Hz. 2) Definitions of prime power and standby power ratings. 3) Technical data on the engine, alternator, cooling systems, dimensions, and weights of each model. 4) Manufacturing locations and contact information for FG Wilson.

Uploaded by

Namer Haji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Output Ratings

Generating Set Model P250H P275HE


380-415V, 50 Hz 250.0 kVA 275.0 kVA
200.0 kW 220.0 kW
220/127V, 60 Hz - -
- -

Ratings Definitions
Ratings at 0.8 power factor. www.FGWilson.com
Prime Power - Model P250H
These ratings are applicable for supplying continuous electrical
power (at variable load) in lieu of commercially purchased power.
There is no limitation to the annual hours of operation and this
model can supply 10% overload power for 1 hour in 12 hours.

Standby Power - Model P275HE


These ratings are applicable for supplying continuous electrical
power (at variable load) in the event of a utility power failure. No
overload is permitted on these ratings. The alternator on this model
is peak continuous rated (as defined in ISO 8528-3).

Technical Data
Engine Make & Model: Perkins 1306-E87TA330
Alternator Model: LL5014J
No. of Cylinders/Alignment: 6 / In Line
Displacement: litres (cu.in) 8.7 (530.9)
Bore/Stroke: mm (in) 116.6 (4.6)/135.9 (5.4)
Compression Ratio: 16.9:1
Induction: Turbocharged Air To Air Charge Cooled
Frequency: 50 Hz 60 Hz
Engine Speed: 1500 RPM -
Gross Engine Power: kW (hp) 246.0 (330.0) -
BMEP: kPa (psi) 2260.0 (327.8) -
Piston Speed: m/sec (ft/sec) 6.8 (22.3) -
Fuel Tank Capacity: litres (US gal) 350 (92.5) -
Fuel Consump, P250H l/hr (USg/hr) 53.1 (14.0) -
Fuel Consump, P275HE l/hr (USg/hr) 56.3 (14.9) -
Heat Rejected to
Exhaust System: kW (Btu/min) 190.0 (10805) -
Heat Rejected to
Water & Lube Oil: kW (Btu/min) 107.5 (6113) -
Heat Radiation to Room: kW (Btu/min) 45.0 (2559) -
Exhaust Gas Temperature: °C (°F) 528 (982) -
Radiator Cooling
Air Flow: m³/min (cfm) 318.0 (11230) -
Cooling system designed to operate in
ambient conditions up to 50°C (122°F)*
Combustion Air Flow: m³/min (cfm) 16.4 (579) -
Exhaust Gas Flow: m³/min (cfm) 44.5 (1572) -
* Contact your local FG Wilson dealer for power ratings at specific site conditions.

Dimensions and Weights


Length: mm (in) Width: mm (in) Height: mm (in) Dry: kg (lb) Wet: kg (lb)
2960 (116.5) 1003 (39.5) 1718 (67.6) 2215 (4883) 2252 (4965)
Dry = With Lube Oil Wet = With Lube Oil and coolant

Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1/22.

P250H / P275HE
Generating set pictured may include optional accessories.

FG Wilson has manufacturing facilities in the following


locations:
Northern Ireland · Brazil · China · India · USA
With headquarters in Northern Ireland, FG Wilson operates through a Global
Dealer Network. To contact your local Sales Office please visit the FG Wilson
website at www.FGWilson.com

In line with our policy of continuous product development, we reserve the right to change specification without notice
P250H / P275HE/1PP/0406/GB

You might also like