Scribd
Upload
438 views1 page

Readme

1. Install Revit 2019 and the Network License Manager, configure the license server to point to the license file and port, then start the license server service. 2. Start Revit 2019 in multi-user mode and configure it to use the local license server. This will generate license-specific subfolders that need the LICPATH.LIC file copied to. 3. Copy the LICPATH.LIC file to the generated license subfolders to activate the licenses, then run the crack executable to enable multi-user access.

Uploaded by

Zuleika Orta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
438 views1 page

Readme

1. Install Revit 2019 and the Network License Manager, configure the license server to point to the license file and port, then start the license server service. 2. Start Revit 2019 in multi-user mode and configure it to use the local license server. This will generate license-specific subfolders that need the LICPATH.LIC file copied to. 3. Copy the LICPATH.LIC file to the generated license subfolders to activate the licenses, then run the crack executable to enable multi-user access.

Uploaded by

Zuleika Orta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

Install the Autodesk Revit 2019

2. Install Network License Manager ("nlm11.14.1.3_ipv4_ipv6_win64.msi") and change


"this_host" in ADESK.DAT
to your host name. Setup & start license server (LMTOOLS Utility) and Select
"Configuration using Services"
Go to "Config Services" tab and Select "path to the lmgrd.exe file" to your
lmgdr.exe (typically C:\Autodesk\Network License Manager\lmgdr.exe) , Path to
License file (Choose to show *.dat files) and select "ADESK.DAT)
Go to "Start/Stop/Reload" TAB and click "Start Server"
(see
https://knowledge.autodesk.com/sites/default/files/file_downloads/nlm11.14.1.3_ipv4
_ipv6_win64_readme.htm if you have problems)

3. Start REVIT 2019 and Choose Multi User


Select License server model: Single License Server
type "locahost" in Server name
Revit will generate folder that ends with _2019.0.0.F located in
\ProgramData\Autodesk\CLM\LGS\
Exit REVIT 2019

3. Copy/overwrite LICPATH.LIC to all subfolders by path


\ProgramData\Autodesk\CLM\LGS\
Like - \ProgramData\Autodesk\CLM\LGS\128K1_2019.0.0.F\licpath.lic
- \ProgramData\Autodesk\CLM\LGS\919K1_2019.0.0.F\licpath.lic

4. Run revit2019crk.exe

5. Start REVIT 2019 and Choose Multi User


Select License server model: Single License Server
type "locahost" in Server name

6. Enjoy!

You might also like