TIG Welding Machines Single Phase Welding Machines Group
Monotig 160i Basic
Easy to Handle DC Welding Inverter Able to Perform TIG and Electrode
Welding with Trigger Torch.
• Operates at any voltage between 1 Phase 110 to 230 V and can be supplied from
a generator.
• Performs welding by means of its professional, trigger TIG torch.
• It starts the arc by harmlessly touching the tungsten tip in TIG welding.
• Performs welding with long mains and welding cables without loss of performance.
• Suitable for outdoor use and covered by IP 23S protection class.
• Lightweight but robust construction.
• The inverter consumes less energy by means of PFC technology.
• Fan cooled, protected against overheating.
Monotig 160ip
• Single phase, 115 - 230V / 50 - 60 Hz inverter TIG (GTAW) and MMA (SMAW)
welding machine,
• Easy arc starting with HF and Arc Lifting,
• Enhanced professional TIG controls such as pre gas, slope up, pulse, slope
down, post gas, and crater filling,
• Up to 10 program storage,
• Easy monitoring of welding parameters via digital display,
• Operates with generator sets,
• Fan cooled and thermally protected against overloading,
• IP 23S protection class to operate outdoors,
• Light, easy to carry but rugged design to last tough working and environmental
conditions,
• Standard 3 m (10 ft) electrode holder and work clamp
Monotig 200i
Easy to Handle DC Welding Inverter Able to Perform HF TIG and Electrode
Welding.
• Operates at any voltage between 1 Phase 110 to 230 V and can be supplied from
a generator.
• Professional TIG welding machine remotely starting the arc by high voltage and
frequency (HF). With preliminary gas, crater filling and final gas settings. Optionally,
it can also be started by harmlessly touching the tungsten tip.
• Welding parameters are easily set and monitored by means of the digital display.
• Performs welding with long mains and welding cables without loss of performance.
• Suitable for outdoor use and covered by IP 23S protection class.
• Lightweight but robust construction.
• The inverter consumes less energy by means of PFC technology.
• Fan cooled, protected against overheating.
Technical Properties Monotig 160i Basic Monotig 160ip Monotig 200i
Line Voltage (1 Phase) 230 V / 50 Hz 115 - 230V / 50 Hz 230 V / 50 Hz
Input Power 3.1 kVA (%30) 7.2 kVA (%25) 5.3 kVA (%30)
Input Current 13.7 A (%30) 31.5 A (%25) 23 A (%30)
Recommended Line Fuse 25 A 32 A 32 A
Welding Current Range 20 - 160 ADC 30 - 160 ADC 5 - 200 ADC
Rated Welding Current 160 ADC (%30) 150 ADC (%25) 200 ADC (%30)
Max. Open Circuit Voltage 19 - 75 VDC 75 VDC 75 VDC
Tungsten Diameter 1.60 - 2.00 mm 1.60 - 2.40 mm 1.60 - 2.40 mm
Dimensions (l x w x h) 450 x 160 x 312 mm 550 x 160 x 312 mm 660 x 160 x 312 mm
Weight 9.5 kg 10.5 kg 10 kg
Protection Class IP 23S IP 23S IP 23S
Standard Accessories Product Code
Earth Clamp and Cable K301100203 (16 mm² - 3 m)
Electrode Holder with Cable K301000203 (16 mm² - 3 m)
Optional Accessories Product Code
TTB26 - 4 Basic (200 A %60 DC - 4 m) S510032221 -
TTH26 - 4 (180 A %35 DC - 4 m) - S510032211
TTH26 - 8 (180 A %35 DC - 8 m) - S510032212
TTS18 - 4 (320 A %100 DC - 4 m) - S510032201
TTS18 - 8 (320 A %100 DC - 8 m) - S510032202
Water Cooling Unit (CS 200) - K307000010
TIG Accessories Set Set 2 (7910000520) Set 1 (7910000510)
