Scribd
Upload
132 views4 pages

Accelerator Control System: Section

1) The document provides removal and installation instructions for the accelerator control system on a 2006 Sentra. It describes disconnecting the accelerator pedal position sensor connector and removing three nuts to remove the accelerator pedal assembly. 2) Specifications for the accelerator pedal travel are provided, stating the acceptable range is 52.6-58.2mm. 3) Cautions are described to avoid impact or water damage to the accelerator pedal assembly during removal and handling, and to perform an accelerator pedal released position learning procedure after reconnecting the position sensor connector.

Uploaded by

Abbode Horani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views4 pages

Accelerator Control System: Section

1) The document provides removal and installation instructions for the accelerator control system on a 2006 Sentra. It describes disconnecting the accelerator pedal position sensor connector and removing three nuts to remove the accelerator pedal assembly. 2) Specifications for the accelerator pedal travel are provided, stating the acceptable range is 52.6-58.2mm. 3) Cautions are described to avoid impact or water damage to the accelerator pedal assembly during removal and handling, and to perform an accelerator pedal released position learning procedure after reconnecting the position sensor connector.

Uploaded by

Abbode Horani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

B ENGINE

ACCELERATOR CONTROL SYSTEM


SECTION ACC ACC

E
CONTENTS
ACCELERATOR CONTROL SYSTEM ...................... 2 SERVICE DATA AND SPECIFICATIONS (SDS) ........ 3 F
Removal and Installation .......................................... 2 Accelerator Control ................................................... 3
REMOVAL ............................................................. 2 PEDAL TRAVEL .................................................... 3
INSTALLATION ..................................................... 2 G

Revision: December 2006 ACC-1 2006 Sentra


ACCELERATOR CONTROL SYSTEM

ACCELERATOR CONTROL SYSTEM PFP:18005

Removal and Installation EBS00DTP

REMOVAL
1. Disconnect the accelerator pedal position sensor electrical con-
nector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor.

LBIA0333E

2. Remove the two upper and one lower accelerator pedal assem-
bly nuts.

WBIA0520E

3. Remove the accelerator pedal assembly.


● For electrical inspection of the accelerator pedal position sensor. Refer to EC-514, "DTC P2122, P2123
APP SENSOR" and EC-521, "DTC P2127, P2128 APP SENSOR" (QG18DE) or EC-1110, "DTC
P2122, P2123 APP SENSOR" and EC-1117, "DTC P2127, P2128 APP SENSOR" (QR25DE).
CAUTION:
● Do not disassemble the accelerator pedal assembly. Do not remove the accelerator pedal posi-
tion sensor from the accelerator pedal assembly.
● Avoid impact from dropping the accelerator pedal assembly during handling.

● Keep the accelerator pedal assembly away from water.

INSTALLATION
Installation is in the reverse order of removal.
● Check the accelerator pedal for smooth operation. There should
be no binding or sticking when applying or releasing the acceler-
ator pedal.
● Check that the accelerator pedal moves through the full speci-
fied distance of the specified pedal travel “A”.
Pedal Travel “A” : 52.6 - 58.2 mm (2.07 - 2.29 in)
CAUTION:
When the accelerator pedal position sensor harness connector
is disconnected, perform the “Accelerator Pedal Released Posi- LBIA0062E

tion Learning”. Refer to EC-670, "Accelerator Pedal Released


Position Learning" .

Revision: December 2006 ACC-2 2006 Sentra


SERVICE DATA AND SPECIFICATIONS (SDS)

SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030


A
Accelerator Control EBS00EWA

PEDAL TRAVEL
ACC

LBIA0062E E
Accelerator pedal - total travel “A” 52.6 - 58.2 mm (2.07 - 2.29 in)

Revision: December 2006 ACC-3 2006 Sentra


SERVICE DATA AND SPECIFICATIONS (SDS)

Revision: December 2006 ACC-4 2006 Sentra

You might also like