Scribd
Upload
110 views4 pages

Multi Power Supply Flyer

The document describes a new multi-power supply unit that has five integrated power sources in a single device to cover different experiment areas for vocational training in electrical engineering, electronics, and digital technology. It provides stable DC voltages, an adjustable DC voltage source, AC voltages, a function generator, and a three-phase power source. The unit has short-circuit protection and current limiting for safety, and two LCD displays to monitor voltage, current, and frequency outputs. It can be controlled via computer through a USB port.

Uploaded by

Ali Hadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views4 pages

Multi Power Supply Flyer

The document describes a new multi-power supply unit that has five integrated power sources in a single device to cover different experiment areas for vocational training in electrical engineering, electronics, and digital technology. It provides stable DC voltages, an adjustable DC voltage source, AC voltages, a function generator, and a three-phase power source. The unit has short-circuit protection and current limiting for safety, and two LCD displays to monitor voltage, current, and frequency outputs. It can be controlled via computer through a USB port.

Uploaded by

Ali Hadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

NEW

Multi-Power-Supply
For Basic Training in Electrical Engineering,
Electronics and Digital Technology
EloTrain Plug-in System

The New Multi-Power Supply Unit

Universal Power Supply for Student Experiments


Experiments in electronics and digital technology is important for vocational training. The multi-power supply unit has five separate
sources integrated into a single device to cover every experiment area.

Your benefits
• 5 separate power sources in a single device
• Universally deployable, as table-top device, in a carrying case or mounted in training panel frames
• Components in the experiment are protected by adjustable current limiting
• Safe experimenting: all outputs are short-circuit proof and inherently safe
• 2 illuminated LCD displays to indicate voltage, current and frequency
• All voltage sources can be controlled via computer

2 CO3538-8M
Lucas-Nülle
EloTrain Plug-in System

Multifunctional and compact


Two illuminated LCD displays help to facilitate voltage and current readings (DC voltage source), or voltage and frequency readings
(on the function generator). The current limitation setting of the variable DC voltage source provides the modules optimal protection
from damage caused by excessive currents.

Technical data
• Stabilized fixed voltage sources 5 V, 12 / 15 V, 1
­ 5 V, each 1 A
• Variable DC voltage source 0 ­30 V, 1 A
• AC voltages 12 / 24 V, each 0.2 A
• Function generator 0.1 Hz up to 1 MHz, +/­10 VPP , 0.2 A (sinusoidal, delta or square-wave voltage)
• Switchable three-phase source 1 Hz/ 50 Hz, 3 x 7 / 12 V, 3x 0.2 A
• 2­row displays for indicating voltage, current and frequency
• USB port for control using computer
• The computer is also easily used to control the multi­power supply unit. This is especially practical when operating the device
from the experiment panel frames from Lucas­Nülle or when you wish to rapidly demonstrate some point to your training
group.

CO3538-8M 3
Lucas-Nülle
09/17 -1GB (Printed in Germany)
Subject to technical changes
Ref.­No.: K-G0-1162-GB
Multi Power Supply
Lucas-Nülle GmbH
Siemensstraße 2 · D-50170 Kerpen-Sindorf
Telephone: +49 2273 567-0 · Fax: +49 2273 567-69
www.lucas-nuelle.com · export@lucas-nuelle.com

You might also like