Scribd
Upload
802 views2 pages

Weather Station Instructions PDF

To install the Weather Station 220WX and Display RD 33, one must mount the display unit, connect the NMEA cable from the display to the T-connector, mount the weather station antenna with the indentation facing the bow, connect the antenna cable to the antenna and AIRMAR box matching colors, connect the AIRMAR cable to the T-connector, attach the power cable to the other side of the T-connector along with the terminator, and apply 24VDC and 0V power.

Uploaded by

Marios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
802 views2 pages

Weather Station Instructions PDF

To install the Weather Station 220WX and Display RD 33, one must mount the display unit, connect the NMEA cable from the display to the T-connector, mount the weather station antenna with the indentation facing the bow, connect the antenna cable to the antenna and AIRMAR box matching colors, connect the AIRMAR cable to the T-connector, attach the power cable to the other side of the T-connector along with the terminator, and apply 24VDC and 0V power.

Uploaded by

Marios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

How to Install the Weather Station Instrument 220WX with the Display unit RD 33


Mount the Display unit RD 33.


Connect the NMEA cable that comes with the display (M12-05BM+05BF-60) with
the NMEA2000 T-Connector. (Male side on the Display, Female side on the T-
connector).



Mount the Weather Station antenna and make sure that the alignment
indentation facing the bow of the vessel (See Below).






Connect the antenna cable with the antenna using the 10-pin connector.


Cut the other end of the antenna cable and connect it inside the AIRMAR connection box as
shown below.


Connect the same color of both cables (antenna cable + AIRMAR ROHS L1285 cable
and use the same colors) - white, blue, red and black.


Tototheo Trading Ltd - PART OF TOTOTHEO MARITIME


A. 89 Omonoias Avenue, 3048, PO Box 51449, 3505, Limassol, Cyprus
T. +357 25 569 155 | F. +357 25 567 033 | E. info@tototheo.com
www.tototheo.com


Connect the AIRMAR ROHS L1285 cable on the left side of the T-Connector that
display

is connected on

On the other side of the T-Connector, connect the Power Cable (yellow color) and
then the NMEA 2000 Terminator.



Apply 24VDC and 0V on the cables as shown below.

Tototheo Trading Ltd - PART OF TOTOTHEO MARITIME


A. 89 Omonoias Avenue, 3048, PO Box 51449, 3505, Limassol, Cyprus
T. +357 25 569 155 | F. +357 25 567 033 | E. info@tototheo.com
www.tototheo.com

You might also like