Scribd
Upload
345 views2 pages

F3524GSI 18924 - L

The document provides technical specifications for GE's Waukesha Series Four rich-burn gas engines, including dimensions, weights, performance data, emissions levels, heat balance information, and intake/exhaust system details. The engines are suited for harsh gas compression, power generation, and mechanical drive applications and can reliably produce more power at high altitudes and temperatures while delivering low emissions.

Uploaded by

kman548
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
345 views2 pages

F3524GSI 18924 - L

The document provides technical specifications for GE's Waukesha Series Four rich-burn gas engines, including dimensions, weights, performance data, emissions levels, heat balance information, and intake/exhaust system details. The engines are suited for harsh gas compression, power generation, and mechanical drive applications and can reliably produce more power at high altitudes and temperatures while delivering low emissions.

Uploaded by

kman548
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GE Power & Water

Waukesha* gas engine


VHP* Series Four*
F3524GSI
560 - 840 BHP (418 - 626 kWb)

GE’s Waukesha Series Four rich-burn engines are the more power on hot field gases, at high altitudes, and in
engines of choice for the harshest and most demanding remote locations, all while delivering low emissions when
gas compression, power generation and mechanical drive paired with a 3-way catalyst (NSCR).
applications. The Series Four engines can reliably produce

technical data
Cylinders Inline 6 Dimensions l x w x h inch (mm)
Piston displacement 3520 cu. in.(58 L) 129.14 (3280) x 85.65 (2175) x 81.34 (2066)
Compression ratio 8:1
Bore & stroke 9.375’’ x 8.5’’ (238 x 216) Weights lb (kg)
Jacket water system capacity 48.5 gal. (184 L) 15,000 (6804)
Lube oil capacity 72 gal. (273 L)
Starting system 125 - 150 psi air/gas 24V electric

*Trademark of General Electric Company


performance data
Intercooler Water Temperature 130°F (54°C) 1200 RPM 1000 RPM
Power bhp (kWb) 840 (626) 700 (522)
BSFC (LHV) Btu/bhp-hr (kJ/kWh) 8035 (11366) 7731 (10935)
Fuel Consumption Btu/hr x 1000 (kW) 6749 (1976) 5411 (1586)
NOx g/bhp-hr (mg/Nm @ 5% O2)
3
15.60 (5857) 15.60 (5766)
Emissions

CO g/bhp-hr (mg/Nm3 @ 5% O2) 12.80 (4743) 12.30 (4556)


NMHC g/bhp-hr (mg/Nm @ 5% 02)
3
0.15 (59) 0.16 (60)
THC g/bhp-hr (mg/Nm3 @ 5% O2) 0.50 (222) 0.60 (227)
Heat to Jacket Water Btu/hr x 1000 (kW) 2046 (600) 1655 (485)
Heat to Lube Oil Btu/hr x 1000 (kW) 297 (87) 239 (70)
Balance
Heat

Heat to Intercooler Btu/hr x 1000 (kW) 114 (33) 70 (21)


Heat to Radiation Btu/hr x 1000 (kW) 379 (111) 337 (99)
Total Exhaust Heat Btu/hr x 1000 (kW) 1905 (558) 1434 (420)
Induction Air Flow scfm (Nm3/hr) 1236 (1861) 991 (1492)
Exhaust
System
Intake/

Exhaust Flow lb/hr (kg/hr) 5752 (2608) 4612 (2092)


Exhaust Temperature °F (°C) 1196 (644) 1128 (609)

All data according to full load and subject to technical development and modification.
Consult your local GE Power & Water’s representative for system application assistance. The manufacturer reserves the right to change or modify without notice, the design or
equipment specifications as herein set forth without incurring any obligation either with respect to equipment previously sold or in the process of construction except where
otherwise specifically guaranteed by the manufacturer.

GE Power & Water Visit us online at:


1101 West Saint Paul Ave. www.ge-waukesha.com
Waukesha, WI 53188-4999
P: 1.262.547.3311 ©2013 General Electric Company
F: 1.262.549.2759 All Rights Reserved

7039 0413 GEA-18924

You might also like