Radial Lead Fuses
TE5® > Time-Lag > 392 Series
392 Series, TE5® Time-Lag Fuse
Description
TE5®, time-Lag type, 250V rated, designed in accordance
to IEC 60127-3.
Features
• Lead-free • Internationally approved
• Reduced PCB space • Low internal resistance
requirements • Shock safe casing
• Direct solderable or • Vibration resistant
plug-in versions
• Halogen free
Agency Approvals Applications
• Battery Charges • Power supplies
Agency Agency File Number Ampere Range
• Consumer Electronics • Industrial Controllers
126983 800mA - 6.3A
1010251 800mA - 4A Additional Information
1026673 5A - 6.3A
E67006 800mA - 6.3A
JET1896-31007-2002 1A - 5A
Datasheet Resources Samples
CQC07012021162 800mA - 6.3A
Electrical Characteristics for Series
SU05024-7013
SU05024-7014 % of Ampere
SU05024-7015 Opening Time
800mA - 6.3A Rating
SU05024-7016
SU05024-7017 150% 1 Hour, Min.
SU05024-7018 210% 120 s, Max.
275% 400 ms Min. ; 10 Sec. Max.
400% 150 ms Min. ; 3 Sec. Max.
1000% 20 ms Min. ; 150 ms Max.
Electrical Characteristic Specifications by Item
Voltage Power Melting Agency Approvals
Rated Amp Voltage Breaking Drop Dissipation Integral
Current Code Rating Capacity 1.0×IN max. 1.5×IN 10×IN
(mV) max. (mW) min. (A2s)
225 mA 0225 250V 50A/250 VAC 214 145 0.443
800 mA 0800 250V 25A/250 VAC 110 280 3.80 x x x x x
1.00 A 1100 250V 25A/250 VAC 115 400 5.80 x x x x x x
1.25 A 1125 250V 25A/250 VAC 100 500 9.75 x x x x x x
1.60 A 1160 250V 25A/250 VAC 95 600 13.50 x x x x x x
2.00 A 1200 250V 25A/250 VAC 90 700 21.00 x x x x x x
2.50 A 1250 250V 25A/250 VAC 85 750 32.00 x x x x x x
3.15 A 1315 250V 32A/250 VAC 80 1100 55.00 x x x x x x
4.00 A 1400 250V 40A/250 VAC 75 1200 100.00 x x x x x x
5.00 A 1500 250V 50A/250 VAC 70 1000 90.00 x x x x x x
6.30 A 1630 250V 63A/250 VAC 65 1200 126.00 x x x x x
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Radial Lead Fuses
TE5® > Time-Lag > 392 Series
Temperature Rerating Curve Average Time Current Curves
0.225A
0.800A
1.00A
1.25A
1.60A
2.00A
2.50A
3.15A
4.00A
5.00A
6.30A
140
100000
120
PERCENT OF RATING
100
10000
80
60
1000
40 23°C
20
100
TIME IN SECONDS
0
-40 -20 0 20 40 60 80
AMBIENT TEMPERATURE (°C)
10
0.1
0.01
0.001
0.20 1 10 100 1000
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
300
Recommended Process Parameters:
280
Temperature (°C) - Measured on bottom side of board
260
240
Wave Parameter Lead-Free Recommendation
220 Preheat:
200 (Depends on Flux Activation Temperature) (Typical Industry Recommendation)
100° C
180
Temperature Minimum:
160
140 Temperature Maximum: 150° C
120 Preheat Time: 60-180 seconds
100
80 Solder Pot Temperature: 260° C Maximum
60
40
Solder Dwell Time: 2-5 seconds
20
0 Recommended Hand-Solder Parameters:
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
10
20
30
40
50
60
70
80
90
0
Time (Seconds) Solder Iron Temperature: 350° C +/- 5°C
Preheat Time Cooling Time Heating Time: 5 seconds max.
Dwell Time
Note: These devices are not recommended for IR or
Convection Reflow process.
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Radial Lead Fuses
TE5® > Time-Lag > 392 Series
Product Characteristics
Base/Cap: Brown Thermoplastic Operating Temperature –40ºC to +85ºC (consider de-rating)
Materials Polyamide PA 6.6, UL 94 V-0
Round Pins: Copper, Tin-plated –40ºC to +85ºC/21 days
Climatic Category
(EN 60068-1, -2-1, -2-2, -2-78)
Lead Pull Strength 10 N (IEC 60068-2-21)
+10 ºC to +60 ºC
260ºC, ≤ 3 sec. (Wave) Relative humidity ≤ 75% yearly
Solderability Stock Condition
350ºC, ≤ 3 sec. (Soldering iron) average, without dew, maximum
value for 30 days - 95%
Soldering Heat 260ºC, 10 sec. (IEC 60068-2-20)
24 cycles at 15 min. each
Resistance 350ºC, ≤ 3 sec. (Soldering iron)
(EN 60068-2-6)
Vibration Resistance
10–60 Hz at 0.75 mm amplitude
60–2000 Hz at 10 g acceleration
Dimensions Part Numbering System
8.5 max. 4
392 xxxx 0000
max. 8
Series
0.6 1.5
1 +0.1 0.5 min
Amp Code
L
Refer to Amp Code column of
Electrical Characteristics Table
5.08
Packaging Code
0000 Tape/Ammopack (1,400 pcs.)
Holes in the printed circuit board 0440 Short Leads - Bulk (1,400 pcs.)
Long Leads (L=18.8mm)
Short Leads (L=4.3mm)
Packaging
Quantity &
Packaging Option Packaging Specification Quantity Taping Width
Packaging Code
Tape & Ammopack N/A 1,400 0000 N/A
Short Leads N/A 1,400 0440 N/A
© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
