EGR Cooler Connection Page 1 of 4
011-024 EGR Cooler Connection
Remove
Remove the
capscrews from the
P-clip(s) that attach
the tube to the
exhaust manifold.
Remove the two V-
band clamps, tube,
and gaskets.
Discard the gaskets.
mk:@MSITStore:C:\Users\jorispc\Downloads\Quick%20Serve%20DVD\MR_D.CHM::/e... 15-Mar-19
EGR Cooler Connection Page 2 of 4
Inspect for Reuse
Inspect the tube for
cracks, restrictions,
plugging, and
damage.
Inspect the V-band
clamps for signs of
overextension. The
band must not be
bent or damaged.
Inspect the V-band
clamp threads for
damage.
Replace the V-band
clamp if damage is
found.
mk:@MSITStore:C:\Users\jorispc\Downloads\Quick%20Serve%20DVD\MR_D.CHM::/e... 15-Mar-19
EGR Cooler Connection Page 3 of 4
Install
Before installing the
V-band clamp, coat
the clamping surface
with high
temperature anti-
seize compound.
Place new gaskets
onto the tube.
Install the tube.
Position the V-band
clamps.
Coat the P-clip
capscrew(s) with
high-temperature
anti-seize
compound.
Loosely install the
capscrew(s) for the
mk:@MSITStore:C:\Users\jorispc\Downloads\Quick%20Serve%20DVD\MR_D.CHM::/e... 15-Mar-19
EGR Cooler Connection Page 4 of 4
P-clip(s).
Tighten the V-band
clamps.
Torque
Value: 11 n.m [100 in-
lb]
Tighten the P-clip
capscrew(s).
Torque
Value: 24 n.m [212 in-
lb]
Operate the engine and
check for boost and
exhaust leaks.
Last Modified: 07-Mar-2013
Copyright © 2000-2010 Cummins Inc. All rights reserved.
mk:@MSITStore:C:\Users\jorispc\Downloads\Quick%20Serve%20DVD\MR_D.CHM::/e... 15-Mar-19
