Scribd
Upload
203 views1 page

FichaTécnicaMotor200KW PDF

This document provides technical specifications for a three-phase squirrel-cage motor with an order number of 1LE0101-3AB73-4AB4. Key details include: - It is a 200 kW, 4-pole motor that operates at 1,488 rpm with a maximum speed of 2,300 rpm. - The motor has an efficiency of 95.1% at full load and is rated for continuous duty. - Additional mechanical details include a frame size of 315L, weight of 1,080 kg, and bearings suitable for horizontal or vertical mounting configurations.

Uploaded by

Edward Jr Chapeton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
203 views1 page

FichaTécnicaMotor200KW PDF

This document provides technical specifications for a three-phase squirrel-cage motor with an order number of 1LE0101-3AB73-4AB4. Key details include: - It is a 200 kW, 4-pole motor that operates at 1,488 rpm with a maximum speed of 2,300 rpm. - The motor has an efficiency of 95.1% at full load and is rated for continuous duty. - Additional mechanical details include a frame size of 315L, weight of 1,080 kg, and bearings suitable for horizontal or vertical mounting configurations.

Uploaded by

Edward Jr Chapeton
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SIEMENS

Datasheet for three-phase Squirrel-Cage-Motors


Order Number: 1LE0101-3AB73-4AB4
Client-order-no.:
Order-no.: Item-no.:
Offer-no.: Consignment-no.:
Remarks: Project:

Electrical data General data


Rated motor voltage: 400VD / 690VY Frame size: 315L
Frequency: 50 Hz Type of construction: IMB3
Rated motor power: 200 kW Weight in kg (net): 1080 kg
Rated motor speed: 1488 1/min Frame material Cast iron
Maximum Speed: 2300 1/min Fan cover material: metal
Number of poles: 4 Degree of protection: IP 55
No load current: 86 A Method of cooling: Self-ventilated (IC 411)
Rated current: 345 A Vibration class: A (standard)
Starting current: 7.4 Insulation: 155(F) / 130(B)
Rated motor torque: 1284 Nm Duty type: S1 = cont. operation
Torque class: J Direction of rotation: bidirectional
Starting torque: 3
Breakdown torque: 3 Terminal box
Efficiency class: IE 2 Material of terminal box: Cast iron
Efficiency 100% Load: 95.1% Terminal screw thread: M12
Efficiency 75% Load: 95.1% Max. cable cross-sectional area: 240 mm²
Efficiency 50% Load: 95.1% Cable diameter from ... to ...: 37 - 44 mm
Power factor 100% Load: 0.88 Cable entry: M63 x 1.5 + M63 x 1.5
Motor protection: 3 PTC thermistors for tripping Cable gland: no
Terminal box position: terminal box on top

Mechanical data Explosion protection


Noise (Lpfa): 74.00 dB(A) Type of protection: without (standard)
Moment of inertia: 3.7 kg m²
Cantilever force for x0: 8700 N
Cantilever force for xmax: 7250 N Special configurations
Bearing drive end: 6319 C3
Bearing non-drive end (hor.mount.): 6319 C3
Bearing non-drive end (vert.mount.): 7319 AC
Drain holes: yes
Regreasing device: yes
Relubrication interval at 40°C: 5000 h
Coating: RAL 7030 stone gray

Site conditions
Ambient temperature: -20.0°C to +40°C
Altitude above sea level: 1000m
Standards and specifications: IEC

Technical and ordering data are subject to change. There may be discrepancies between calculated and rating plate values.
Printed on 2013-02-08

You might also like