Scribd
Upload
120 views1 page

Steeper Motor

The M25SP-6NK stepping motor from Mitsumi is compact and produces high torque while running quietly and stably. It is suitable for use in multifunction machines and scanners. It operates on DC 24V and produces a maximum torque of 16.5mN-m, with torque decreasing as pulse rate increases above 1,350 pulses per second. Its dimensions are 25mm x 32mm x 10mm.

Uploaded by

Miguel Velez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
120 views1 page

Steeper Motor

The M25SP-6NK stepping motor from Mitsumi is compact and produces high torque while running quietly and stably. It is suitable for use in multifunction machines and scanners. It operates on DC 24V and produces a maximum torque of 16.5mN-m, with torque decreasing as pulse rate increases above 1,350 pulses per second. Its dimensions are 25mm x 32mm x 10mm.

Uploaded by

Miguel Velez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MITSUMI

Stepping Motors

M25SP-6NK
FEATURES
1. Compact size and high-output torque.
2. Superior running quietness and stability.

USES
Multifunction machines, scanners, etc.

SPECIFICATIONS
Item M25SP-6NK
Rated Voltage DC 24V
Working Voltage DC 21.6~26.4V
Rated Current/Phase 250mA(PEAK)
Coil DC Resistance 65 /phase±7%
Step Angle 7.5°/step
Drive Method Constant Current
Excitation Method 2-2 Phase excitation(Bipolar driving)
Insulation Class Class E insulation
Holding Torque 16.5mN·m
Pull-out Torque 13.3mN·m/400pps
Pull-in Torque 13.3mN·m/400pps
Max. Pull-out Pulse Rate 2,050pps
Max. Pull-in Pulse Rate 1,350pps

CHARACTERISTICS
M25SP-6NK (65 ), DC 24V, 250mA/P
20
18
16
Torque (mN·m)

14
12
10 Pull-out Torque

8
6
Pull-in Torque
4
2
0
0 500 1000 1500 2000 2500
Pulse Rate (pps)

DIMENSIONS
25 9 1
32±0.2 1 0.6
10-0.1
2-0.01
0

2-R3

2- 3.2

Unit : mm
General tolerance : ±0.5

• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.

You might also like