Scribd
Upload
476 views1 page

Tan Delta Test Report

The document reports on test results from a CPC device with serial number FH175L (V1) on April 15, 2019. It performed two test cards: a Quick test that had no overloads or assessment, and a TanDelta test that measured capacitance, dissipation factor, and frequency at different voltages and had no overloads. The TanDelta test used a RJ185X CPTD calibrated on September 22, 2018 to take the measurements.

Uploaded by

Rex007 90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
476 views1 page

Tan Delta Test Report

The document reports on test results from a CPC device with serial number FH175L (V1) on April 15, 2019. It performed two test cards: a Quick test that had no overloads or assessment, and a TanDelta test that measured capacitance, dissipation factor, and frequency at different voltages and had no overloads. The TanDelta test used a RJ185X CPTD calibrated on September 22, 2018 to take the measurements.

Uploaded by

Rex007 90
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Page 1 of 1

\220KV-SS-KARKALA-CT-OC8286-1-1-18.xml:

Test Device: CPC


Serial Number: FH175L (V1)
Date/Time: 04/15/2019 15:44:19
Overall assessment: n/a

Test Cards Overview:

Test Card Type Date/Time Results Assessment Overload


Quick 1 Quick 04/15/2019 15:20:37 no n/a no
TanDelta-PF 1 TanDelta 04/15/2019 15:43:12 yes n/a no

Test Cards:

Quick 1:

Card Type: Quick


Date/Time: 04/15/2019 15:20:37
Overload: no
Assessment: n/a
Range: OFF

TanDelta-PF 1:

Card Type: TanDelta


Date/Time: 04/15/2019 15:43:12
Overload: no
Assessment: n/a
CPTD: RJ185X
Calib.No.: 5.0
By: Omicron electronics; Factory Calibration
Calibration Date: 09/22/2018 12:51:26
Mode: UST-B
Bandwidth: 5 Hz
Averaging: 1
Temperature Compensation: no
Results:
V test V meas. I meas. Frequency Cp DF Assessment
2.00000 kV 2000 V 236.19 µA *50.00 Hz 375.91 pF 0.1303 % n/a
5.00000 kV 5008 V 591.44 µA *50.00 Hz 375.91 pF 0.1316 % n/a
10.00000 kV 9999 V 1.1809 mA *50.00 Hz 375.92 pF 0.1337 % n/a
! = Reduced Voltage; ? = Reduced Accuracy (low voltage or partial discharge)
* = Mains Frequency Suppression

about:blank 4/15/2019

You might also like