Technical Data Sheet
Zwaluw High Tack
The one and only original adesive with extremely high initial tack
Remark (1)
For bonding HPL and cement fibre panels see Technical Bulletins in
the Knowledge Base on our website www.denbraven.com.
Directions Of Use
Apply adhesive with the provided V-nozzle in a 'ventilating way' in
vertical stripes with 10-20 cm distance between stripes. Bring the
materials into position and press firmly so that the adhesive is a
minimum of 2-3 mm thick between material and surface. Do not
apply the adhesive in dots! Because of the high initial strength,
support during curing is usually not necessary. For further questions
please contact our technical department.
Additional information
100 % modulus DIN 53504 S2 1,39 N/mm²
@ Ø2,5 mm/6,3
Application rate 20 g/min
Product Description bar
Zwaluw High Tack is a high quality professional adhesive with an Application temperature +5°C to +40°C
extremely high initial tack based on hybrid technology. It cures
under influence of humidity to form a durable elastic rubber. Base Hybrid
Approximately
Benefits Curing time
@ +23°C/50%
2-3 mm/24
RH
• Extremely high initial tack hours
• No fixation or support needed during curing Density ISO 1183-1 1,57 g/ml
• High mechanical resistance, end strength and E-modulus Elongation at break DIN 53504 S2 335%
• Free of isocyanates, phthalates, solvents and silicones Flow ISO 7390 < 2 mm
• Permanently elastic
Frost resistance during
Up to -15°C
• No shrinkage and bubble free transportation
• Non corrosive towards metals Shorea hardness DIN 53505 55
• Neutral curing, almost odourless 15 minutes @
Skin formation DBTM 10.00
+23°C/50% RH
• Resistant to moisture and weather
• Adheres perfectly without primer on most, even damp, surfaces Temperature resistance -40°C to +90°C
Tensile strength DIN 53504 S2 2,20 N/mm²
Applications These are typical values
Zwaluw High Tack was specifically developed as a universal
adhesive for bonding many building materials such as: stone, Limitations
concrete, mirrors, glass, plasterboard, PU, PVC, hard plastics, • Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics,
enamel, ceramic, copper, lead, zinc, tin, aluminium, metals, alloys, neoprene and bituminous substrates
stainless steel, HPL and cement fibre panels (1), wood and
• Not suitable for continuous exposure to water
paintsystems.
Den Braven Sealants S.A. (Pty) Ltd. 20-04-2019
2 Highview Boulevard, Ferndale Extension 26, Randburg, Gauteng 14:00:40
T +27 117923830 | E sales@denbraven.co.za UTC
Technical Data Sheet
Zwaluw High Tack
The one and only original adesive with extremely high initial tack
• Not suitable for movement joints
Warranty & Guarantee
• Not suitable in combination with chlorides (pools)
Den Braven warrants that its product complies, within its shelf life, to
its specification.
Surface Preparations and Finishing
Disclaimer
Application temperature +5°C to +40°C (applies to environment
All information in this document and in all our other publications (including electronic ones) is based on our current
and substrates). Due to the structure of the Zwaluw High Tack we knowledge and experience and is the exclusive (intellectual) property of Den Braven. No part of this document may
be copied, shown to third parties, reproduced, communicated to the public or used in any other way without Den
recommend using a caulking gun with the correct transmission in Braven's written consent. The technical information in this document serves as an indication and is non-exhaustive.
Den Braven is not liable for any damage, either direct or indirect, due to (editorial) errors, incompleteness and/or
combination with the V-nozzle. All substrates must be solid, clean incorrectness of this document. This includes, but is not limited to, incompleteness and/or incorrectness due to
and free from grease and dust. Clean substrates with Zwaluw technological changes or any research conducted between the date of publication of this document and the date on
which the product is acquired. Den Braven reserves the right to amend the wording of this document. Den Braven
Cleaner. Zwaluw High Tack adheres perfectly without the use of cannot be held liable for any damage, either direct or indirect, due to the use of the product depicted in this
document. The user must read and understand the information in this document and other documents relating to the
primer to most non porous substrates. Porous substrates to be pre- products prior to the use the product. The user is responsible for performing all the requisite tests to make sure that
treated with Zwaluw Primer B1. Always test adhesion prior to the product is suitable for its intended use. We have no influence in what way the product is applied and/or any
circumstances relating to events occurring during storage or transport and therefore we do not accept any liability for
application. damage. All deliveries are made exclusively in accordance with our general terms of conditions which have been
filed at the Dutch Chamber of Commerce.
Cleaning
Uncured material and tools can be cleaned by using Zwaluw
Cleaner. Cured material can only be mechanically removed. Hands
can be cleaned with Zwaluw Wipes.
Colour(s)
• White
Packaging
• Cartridge
For product specifications, please refer to the Product Detail Page
Shelf Life
In unopened original packaging between +5°C and +25°C, shelf life
is up to 18 months from production date, stored in a dry place.
Certifications
Emicode EC1 Plus
M1
A+ (Eurofins ISO 16000)
Health & Safety
Product Safety Data Sheet must be read and understood before
use. These are available on request and via the Den Braven
websites.
Den Braven Sealants S.A. (Pty) Ltd. 20-04-2019
2 Highview Boulevard, Ferndale Extension 26, Randburg, Gauteng 14:00:40
T +27 117923830 | E sales@denbraven.co.za UTC
