Scribd
Upload
79 views3 pages

Change IPASO IDU

This document provides instructions for replacing a modem slot, including taking a backup of the link configuration, removing the old modem and IF cable, inserting the new modem and cable, and monitoring RSLs to ensure link stability after replacement. Key steps include checking the modem port setting, taking a configuration backup, powering off and replacing the modem hardware, and using the saved configuration file if issues occur after turning on the new modem.

Uploaded by

amr_karimm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
79 views3 pages

Change IPASO IDU

This document provides instructions for replacing a modem slot, including taking a backup of the link configuration, removing the old modem and IF cable, inserting the new modem and cable, and monitoring RSLs to ensure link stability after replacement. Key steps include checking the modem port setting, taking a configuration backup, powering off and replacing the modem hardware, and using the saved configuration file if issues occur after turning on the new modem.

Uploaded by

amr_karimm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

1-You should know number of modem slot that you want to change .

Provisioning>MODEM function setting>MODEM port setting .

2- You should see RSLs of Modem .

Metering>current Metering .
3-You should take backup of link configuration as precaution .

Equipment Utility>Export(NE->Storage) Utility > choose Equipment Config Data> Execute> keep .

-Turn off Modem (pull it and push to 0) .

-Remove IF cable .

-Replace Modem with new one .

- Insert IF cable .

-Turn Modem on .

-If any problems in crosses occurs follow the following :

Equipment Utility>Update(Storage->NE) Utility > choose Config Data> Execute> Open saved file .
-You should see RSLs .

Metering>current Metering .

-You should wait some time to monitor RSLs and make sure that link is stable .

You might also like