Scribd
Upload
1K views1 page

Insulyte 7 - Ace

This document provides information on Insulyte 7, a medium purity insulating castable. It has a maximum service temperature of 1100°C and is installed by tamping. The castable has a typical dry density of 0.84 g/cc and compressive strength of 15.4 kg/cm2 after drying at 110°C for 24 hours. It exhibits a refractory rating of 12/1337°C and a thermal conductivity of 0.18 kcal/m/hr/°C at 500°C. Insulyte 7 is packaged in 25 kg bags and has a storage life of 9 months if properly stored.

Uploaded by

ErRaviSharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Insulyte 7 - Ace

This document provides information on Insulyte 7, a medium purity insulating castable. It has a maximum service temperature of 1100°C and is installed by tamping. The castable has a typical dry density of 0.84 g/cc and compressive strength of 15.4 kg/cm2 after drying at 110°C for 24 hours. It exhibits a refractory rating of 12/1337°C and a thermal conductivity of 0.18 kcal/m/hr/°C at 500°C. Insulyte 7 is packaged in 25 kg bags and has a storage life of 9 months if properly stored.

Uploaded by

ErRaviSharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MEDIUM PURITY INSULATING CASTABLE

PRODUCT: INSULYTE 7
TYPE: LOW DENSITY INSULATING CASTABLE
NATURE OF BOND: HYDRAULIC
INSTALLATION: TAMPING

GENERAL PROPERTIES
MAX. SERVICE TEMPERATURE: 1100 ºC
MAXIMUM GRAIN SIZE: 6 mm
WATER REQUIRED FOR CASTING: 60 – 65 %

CHEMICAL ANALYSIS, %
RANGE TYPICAL VALUE TEST PROCEDURE
Fe2O3 7.00 – 8.50 7.45 BIS 12107 Part 6

PHYSICAL PROPERTIES
RANGE TYPICAL VALUE TEST PROCEDURE
Dry density, g / cc
after drying at 110 ºC / 24 hrs 0.80 – 0.90 0.84 BIS 10570
2
CCS, kg/cm
after drying at 110 ºC / 24 hrs 12 – 16 15.4 BIS 10570
after heating at 1100 ºC / 3 hrs 6 – 12 8.3 BIS 10570
% Retained on maximum size 0–5 1.2 BIS 1528 Part 14

THERMAL PROPERTIES
RANGE TYPICAL VALUE TEST PROCEDURE
Refractoriness, Orton / ºC 12 / 1337 BIS 1528 Part 1
PLC, %
after heating at 1100 ºC / 3 hrs (- 0.40) to (-1.20) -0.80 BIS 10570

Thermal Conductivity,
kcal/m/hr/ºC WATER
at 500 ºC HF 0.17 – 0.20 0.18 CALORIMETRIC
METHOD

Packaging: 25 kg bags Delivery State: Dry

Storage Life: Best till 9 months from the date of production, if stored in proper
condition.
Rev 01 05 / 2012

Note:
(1) The data are current production averages. They can not be used as limits for specification.
PD / IC / 02 Rev 01

You might also like