Scribd
Upload
363 views4 pages

Magnesium Anodes & Test Stations Inventory

The document lists materials and equipment for a corrosion protection project including: - Magnesium ribbon anodes of varying lengths and diameters with cables - Potential test stations, isolation coupling test stations, and current test stations with terminals and foundations - Cables of varying sizes - Split bolt connectors, pin brazing charges, ceramic ferules, and melt stick epoxy - Bonding stations with terminals, resistors, and galvanized conduit and supports - A permanent reference electrode with cable - Cable lugs for connecting cables - Quantities received and balances are provided for each item

Uploaded by

anonymous542
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
363 views4 pages

Magnesium Anodes & Test Stations Inventory

The document lists materials and equipment for a corrosion protection project including: - Magnesium ribbon anodes of varying lengths and diameters with cables - Potential test stations, isolation coupling test stations, and current test stations with terminals and foundations - Cables of varying sizes - Split bolt connectors, pin brazing charges, ceramic ferules, and melt stick epoxy - Bonding stations with terminals, resistors, and galvanized conduit and supports - A permanent reference electrode with cable - Cable lugs for connecting cables - Quantities received and balances are provided for each item

Uploaded by

anonymous542
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Material Description

Anode: Magnesium ribbon anode with prepackaged length 2.2m and dia 10cm
Anode C/W 12Meters long 6mm2 THHN/THWN Cable. (Temporary anodes)

Anode: Magnesium ribbon anode with prepackaged length 2.2m and dia 10cm
Anode C/W 3Meters long 6mm2 THHN/THWN Cable. (Temporary anodes)

Potential test station: 5 terminals with shunt (0.01 Ohm) lockable Big Fink test
station, with a supplier dent lock, c/w 3” hot dip galvanized steel pipe and chain
PTS to hold the cap with stainless steel marker plate. Concrete foundation to be done
by contractor on site.
Cable Cables: 2x2.5 mm2 HMWPE P/L & Measuring connection
Cable Cables: 2x6 mm2 HMWPE
Split Bolt Split Bolt Connectors for 6 mm2 Cable
Pin Brazing 8mm Pin Brazing Charges
Charges
Ceramic 8mm Ceramic ferules
Ferules
Melt Stick Melt Stick Epoxy
Epoxy

Isolation coupling test station: 8 terminals with shunt (0.01 Ohm) lockable Big
Fink test station, with a supplier dent lock, c/w 3” hot dip galvanized steel pipe
ICTS and chain to hold the cap with stainless steel marker plate. Concrete foundation
to be done by contractor on site.

Current Test Station: 8 terminals with shunt (0.01 Ohm) lockable Big Fink test
station, with a supplier dent lock, c/w 3” hot dip galvanized steel pipe and chain
CTS to hold the cap with stainless steel marker plate. Concrete foundation to be done
by contractor on site.

Anode: Magnesium ribbon anode with prepackaged length 2.2m and dia 10cm
Anode C/W 18Meters long 6mm2 THHN/THWN Cable. (Temporary anodes)

Bonding Station: Two (2) terminals NEMA 4X and IP 55 bonding box complete
BB 2T with variable resistors c/w 2” Hot Dip Galvanized Steel conduit and hot dip
galvanize Support Channel (Rigid Steel).

Bonding Station: Three (3) terminals NEMA 4X and IP 55 bonding box complete
BB 3T with variable resistors c/w 2” Hot Dip Galvanized Steel conduit and hot dip
galvanize Support Channel (Rigid Steel).
Prep-packaged Permanent Reference Electrode Stelth Cu/CuSO4, C\W 15M long
Anode 1x6mm2 HMWPE Cable.
Anode: Magnesium 60Lb anode with prepackaged length 1.8m and dia 20cm
Anode C/W 15 Meters long 6mm2 THHN/THWN Cable.
Anode: Magnesium 60Lb anode with prepackaged length 1.8m and dia 20cm
Anode C/W 3 Meters long 6mm2 THHN/THWN Cable.
Road Crossing test station: 5 terminals with shunt (0.01 Ohm) lockable Big Fink
test station, with a supplier dent lock, c/w 3” hot dip galvanized steel pipe and
RCTS chain to hold the cap with stainless steel marker plate. Concrete foundation to be
done by contractor on site.
LUG Cable lugs for 2.5 mm2 (Opening 8mm)
LUG Cable lugs for 6 mm2 (Opening 8mm)
RECEIVED
UNIT QTY BALANCE
3/5/2019 ### ###

Each 228 24 76 128 0

Each 624 76 184 288 76

Each 84 84

Meter 7700 1334 1186 5180


Meter 150 150
Each 230 30 163 37

Each 950 222 194 534

Each 950 222 194 534

Each 485 186 48 251

Each 6 6

Each 22 22

Each 56 6 16 34 0

Each 21 21

Each 7 7

Each 7 6 1 0

Each 48 14 8 26

Each 48 14 8 26
Each 48 48

Each 1000 315 685


Each 25 20 5

You might also like