[1]Composite Structures of Steel and Concrete Beams, slabs, columns, and frames for buildings

Third Edition R.P. JOHNSON MA, FREng, FICE, FIStructE

Emeritus Professor of Civil Engineering
University of Warwick

[2] Nässén J, Holmberg J, Wadeskog A, Nyman M. Direct and indirect energy use and carbon emissions
in the production phase of buildings: an inputeoutput analysis. Energy 2007;32(9):1593e602.

[3] Carbon emission of global construction sector

Lizhen Huanga,⁎, Guri Krigsvolla, Fred Johansena, Yongping Liua, Xiaoling Zhangb

[4]Assessment of CO2 emissions reduction in high-rise concrete office buildings using different
material use options
C.K. Chau∗, W.K. Hui, W.Y. Ng, G. Powell

[5] Addis, B.: Building with Reclaimed Components and Materials: A Design Handbook for
Reuse and Recycling, Earthscan, United Kingdom, 2006.

[6] https://ec.europa.eu/eurostat/statistics-explained/index.php/Waste_statistics [accessed

25.10.2018 4.25pm]

[7]Preliminary study for the management of construction and demolition waste B. Kourmpanis, A.
Papadopoulos, K. Moustakas, M. Stylianou, K.J. Haralambous, M. Loizidou Unit of Environmental
Science & Technology, School of Chemical Engineering, National Technical University of Athens, 9,
Heroon Polytechniou Str., Zografou Campus, 15773, Athens, Greece

[8] M. von Arnim, “Demountable composite steel-concrete flooring system for reuse”, Master
Thesis, , Karlsruhe, 2017.

[9] My case study

[10]Quantifying the waste reduction potential of using prefabrication in building construction in

Hong Kong
L. Jaillon a, C.S. Poon a,*, Y.H. Chiang b

[11] Life cycle greenhouse gas emissions and energy analysis of prefabricated reusable building
modules
Lu Ayea,∗, T. Ngoa, R.H. Crawfordb, R. Gammampilaa, P. Mendisa

[12]Deric J. Oehlers, Mark A. Bradford. COMPOSITE STEEL AND CONCRETE

STRUCTURAL MEMBERS Fundamental Behaviour. Pergamon, 1995.

[13] Qing Quan Liang. Analysis and Design of Steel and Composite Structures. CRC Press, 2015.
[14]Deric J. Oehlers, a Ninh T. Nguyen, Marfique Ahmed, Mark A. Bradford. Partial Interaction in
Composite Steel and Concrete Beams with Full Shear Conn[8ection. J. Construct. Steel Res. Vol.
41, No. 2/3, pp. 235-248, 1997

[15] NEN-EN 1994-1-1. Eurocode 4: Design of composite steel and concrete structures - Part 1-
1:General rules and rules for buildings. Standard, CEN, July 2005.

[16]J.W.B. Stark and R. Abspoel. CT4121 Steel Structures 3: Composite Constructions. TU Delft,
2010.

[17] EN1090-2: Execution of steel structures and aluminium structures - Part 2: Technical
requirements for steel structures, Brussels, Belgium: European Committee for Standardization
(CEN), 2011.

[18] C. Braendstrup.Conceptual design of a demountable, reusable composite flooring system

Structural behaviour and environmental advantages. Master’s thesis, Delft University of
Technology, September 2017.

[19] Towards adoption of prefabrication in construction

Vivian W.Y. Tama,_, C.M. Tamb, S.X. Zengc, William C.Y. Ngb

[20] Shear resistance of the perfobond-rib shear connector depending on concrete strength and rib
arrangement Jin-Hee Ahna , Chan-Goo Lee b , Jeong-Hun Wona , Sang-Hyo Kima

[21] Experiments on Limit State Design of Large Stud Shear Connectors

By Chang Su Shim*

[22] Various types of shear connectors in composite structures: A review Ali Shariati, N. H.
RamliSulong, MeldiSuhatril and Mahdi Shariati* Department of Civil Engineering, University of
Malaya, 50603 Kuala Lumpur, Malaysia.

[23] Shear resistance behaviors of a newly puzzle shape of crestbond rib shear connector: An
experimental study Thi Hai Vinh Chu 1a, Duc Vinh Bui 2b, Van Phuoc Nhan Le 2c, In-Tae Kim 3d,
Jin-Hee Ahn 4e and Duy Kien Dao 

[24] Michel Crisinel. Partial-Interaction Analysis of Composite Beams with Profiled Sheeting and
Non-welded Shear Connectors. Eccole Polytechnique Federale de Lausanne Laussane, Switzerland.
1990

[25] Mahmood Md Tahir, Poi Ngian Shek, Cher Siang Tan. Push-off tests on pin-connected shear
studs with composite steel–concrete beams. Construction and Building Materials 23 (2009)
3024–3033

[26] SOLUTIONS FOR COMPOSITE BEAMS Hilti X-HVB system

[27] Prefabricated demountable concrete and FRP decks in composite structures Marko
Pavlović*,a, Milan Veljkovića aDelft University of Technology, Faculty of Civil Engineering and
Geosciences, The Nederlands m.pavlovic@tudelft.nl, m.veljkovic@tudelft.nl

[28] Marko Pavlović, Zlatko Marković, Milan Veljković and Dragan Buđevac. Bolted shear
connectors vs. headed studs behaviour in push-out tests. Journal of Constructional Steel Research
88 (2013) 134–149.

[29] BS 5400-5: Steel, concrete and composite bridges - Part 5: Code of practice for the design
of composite bridges, British Standard Institution, United Kingdom, 2005.

[30] Dallam LN. High Strength Bolts Shear Connectors — Pushout Tests. ACI J Proc
1968(No. 9):767–9.

[31] Recovery and Re-Use of Structural Products from End of Life Buildings
P Hopkinson, HM Chen, K Zhou, Y Wong, D Lam
Proceedings of the Institution of Civil Engineers-Engineering Sustainability …

[32] Behavior of High-Strength Friction-Grip Bolted Shear Connectors in Sustainable Composite

Beams Xinpei Liu1 ; Mark A. Bradford, Dist.M.ASCE2 ; and Michael S. S. Lee3

[33] M.S. Pavlović. Resistance of bolted shear connectors in prefabricated steel-concrete

composite decks. PhD thesis, University of Belgrade, 2013.

[34] Effect of Concrete Strength and Stud Collar Size to Shear Capacity of Demountable Shear
Connectors X. H. Dai1 ; D. Lam2 ; and E. Saveri3

[35] N. Rehman, D. Lam, X. Dai, A.F. Ashour. Experimental study on demountable shear
connectors in composite slabs with profiled decking. Journal of Constructional Steel Research 122
(2016) 178–189

[36] Jean-Pierre Jaspart, Klaus Weynand. Design of joints in steel and composite structures. ECCS
- European Convetion for Constructional Steelwork, 2016.

[37] M. P. Nijgh. New Materials for injected bolted connections: A feasibility study for
demountable connections. Master’s thesis, Delft University of Technology, April 2017.

[38] EN1993-1-8: Eurocode 3: Design of steel structures - Part 1-8: Design of joints, Brussels,
Belgium: European Committee for Standardization (CEN), 2010.

[39] Recent research on composite beams with demountable shear connectors

[40] Testing of composite beam with demountable shear connectors

[41] Design development of steel-concrete composite bridges in France Jacques Brozzetti a, b,*.

[42] Designing composite steel beams with precast concrete hollow-core slabs
D. Lam, BEng, MPhil, PhD, CEng, MIStructE, MIMgt, K. S. Elliott, BTech, PhD,
CEng, MICE, and D. A. Nethercot, BSc, PhD, DSc, FREng, FIStructE, FICE

[43] Preliminary Assessment of a Composite Flooring System for Reuse, M. P. Nijgh

[44] M. P. Nijgh, M. Veljkovic, M. Pavlovic and R. Oly, “Flexible shear connectors in a tapered
composite beam optimized for reuse,” in Proceedings of the 6th Annual International Conference
on Architecture and Civil Engineering, Singapore, 2018.

[45] Techical Annex of REDUCE project (Reuse and Demountability using Steel Structures and the
CircularEconomy), RFCS proposal, 2016

[46] https://shop.goessl-pfaff.de/art/6hy515901 [accesed 11-sept-2018 7.56pm]

[47] https://samaro.fr/fr/gel-coat/hu385-ren-hy-2404-pot-500-g-3819.html [accesed 11-sept-2018

7.58pm]

[48] https://www.mouldlife.net/rengel--sw-404-1372-p.asp [accesed 11-sept-2018 7.59pm]

[49] https://www.formx.eu/sealer--release/acmos-82-aerosol---400gr.php [accesed 11-sept-2018

8.01pm]

[50] https://www.amazon.com/Makita-XGC01Z-10-Ounce-Caulk-Adhesive/dp/B00OYVDOSG
[accesed 11-sept-2018 8.06pm]
[51] https://www.viba.nl/media/files//resources/176099%2022172rengel-sw-404_hy-2404_hy-
5159_eur_e1.pdf [accesed 11-sept-2018 8.28pm]

[52] Assessment of demountable steel-concrete composite shear connector system with injection bolts,
Alkioni

[53]M. C. Moynihan and J. M. Allwood, “Viability and performance of demountable composite

connectors” Journal of Constructional Steel Research, vol. 99, pp. 47-56, 2014.

[54] L. Wang, M. D. Webster and J. F. Hajjar, “Behavior of sustainable composite floor systems
with deconstructable clamping connectors” in Proceedings of the 8th International Conference on
Composite Construction in Steel and Concrete, Jackon, WY, 2017.

[55] Elastic behaviour of a tapered composite beam optimized for reuse

Martin Paul Nijgh*, Ioan Andrei Gîrbacea, Milan Veljkovic

[56] ArcelorMittal, “Car Parks in Steel” ArcelorMittal - Commercial Sections, Esch-sur-Alzette,

2014.

[57] A. Kozma, C. Odenbreit, M. V. Braun, M. Veljkovic and M. P. Nijgh, “Push-out tests on

demountable shear connectors of steel-concrete composite structures” in Proceedings of the 12th
international conference on Advances in Steel-Concrete Composite Structures , Valencia, 2018.
[58] NEN-EN 1991-1-1+C1. Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-
weight, imposed loads for buildings. Standard, CEN, December 2011.

[59] NEN-EN 1992-1-1. Eurocode 2: Design of concrete structures - Part 1-1:

General rules and rules for buildings. Standard, CEN, December 2004.

[60] S. Gogoi, “Interaction phenomena in composite beams and plates,” Imperial College of Science
and Technology, London, 1964.

[61] G. Hanswille, M. Porsch and C. Ustundag, “Studies of the lifetime of cyclically loaded steel-
concrete composite bridges,” Steel Construction, vol. 3, no. 3, pp. 140-148, 2010.

[62] G. Maheninggalih, “A demountable sturctural system of multi-storey building: Case study of car
park building”, Master Thesis, Delft University of Technology, Delft, 2017.

[63] Kyle Arnold, Retail apocalypse? Online competition drives store closings Orlando Sentinel, July
16, 2017

[64] RICS

[65] https://www.businessinsider.nl/store-closures-in-2018-will-eclipse-2017-2018-
1/?international=true&r=US [accessed 25.10.2018 4.14 pm]

[66] EN1993-1-1: Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for

buildings, Brussels, Belgium: European Committee for Standardization (CEN), 2010.

[67] Markus Feldmann, Ch. Heinemeyer, B. V•olling. Design Guide for Floor

Vibrations. ArcelorMittal, Luxembourg, sections.arcelormittal.com

[68] NEN-EN 1994-1-1+C1/NB. National annex to nen-en 1994-1-1+c1 eurocode 4 design of composite
steel

and concrete structures – part 1-1: General rules and rules for buildings.

[69] British Standards Institution (1990), BS 5950: Structural Use of Steelwork in Buildings, Part 3
Design in Composite Construction. Section 3.1 Code of Practice for Design of Simple and Continuous
Composite Beams, 1990 including Amendments 2010,

[70] American Institute of Steel Construction (2010), AISC 360-10, Specification for Structural Steel
Buildings, Manual of Steel Construction
[71] SERVICEABILITY PERFORMANCE OF COMPOSITE BEAMS, D LAM

[72] Newmark N.M, Siess C. P and Viesst I.M (1951)., Tests and Analysis of Composite Beams with
Incomplete Shear Connection, Proc. Soc. Experimental Stress Analysis 9 (1), 1951

[73] Exact static analysis of partially composite beams and beam-columns

Ulf Arne Girhammar_, Dan H. Pan1

[74] Steel–Concrete Composite Beams Considering Shear

Slip Effects

Jianguo Nie1 and C. S. Cai, P.E., M.ASCE

[75] K. S. Naraine, “Slip and uplift effects in composite beams,” McMaster University, Hamilton, 1984.

[76] A simplifiedanalysismethodforcompositebeamswithinterlayerslip Ulf ArneGirhammar _

[77] Composite Beam‐Columns with Interlayer Slip—Exact Analysis

Ulf Arne Girhammar, Member, ASCE; and Vijaya K. A. Gopu, Member, ASCE

[78] analytical for non-unif martin

[79] Demountable Shear Connectors for Sustainable Composite Construction *Dennis Lam1) and
Xianghe Dai2)

[80] Towards demountable composite steel-concrete flooring system,

Alina
[81] (REDUCE ) (REUSE AND DEMOUNTABILITY USING STEEL STRUCTURES
AND THE CIRCULAR ECONOMY Deliverable D5.1 (Part) . Report on shear
behaviour of demountable connectors in profiled composite slabs (Push tests)

[82]Nijgh, M., Xin, H., & Veljkovic, M. (2018). Non-linear hybrid homogenization method for steel-
reinforced resin.Construction and Building Materials, 182, 324-333.
DOI: 10.1016/j.conbuildmat.2018.06.111

[83]Kolstein, H., Li, J., Koper, A., Gard, W., Nijgh, M., & Veljkovic, M. (2017). Behaviour of double shear
connections with injection bolts. Steel Construction - Design and Research, 10(4), 287-
294. DOI: 10.1002/stco.201710042

[84]Xin, H., Nijgh, M., Veljkovic, M. (2018). Computational homogenization method on steel reinforced
resin used in the injected bolted connections. In 13th World Congress in Computational Mechanics.
[85] A fracture mechanics based description of the pull-out behavior of headed studs embedded in
concrete (Contribution by R. Eligehausen and G. Sawade)

[86] The Tensile Capacity of Welded Shear Stud. Joshua M. Mouras, James P. Sutton, Karl H. Frank,
Eric B. Williamson,

[87]

[88] T. M. Roberts, “Finite difference analysis of composite beams with partial interaction,”
Computers & Structures, vol. 21, no. 3, pp. 469-473, 1985.

[89] J. P. Lin, G. Wang, G. Bao and R. Xu, “Stiffness matrix for the analysis and design of partial-
interaction composite beams,” Construction and Building Materials, vol. 156, pp. 761-772, 2017.