Scribd
Upload
496 views1 page

TDS CSM

This technical data sheet provides information on E-glass chopped strand mat material. It has properties including silane coupling agent, high strength, good mat integrity, and low fuzz during manufacturing. The mat comes in various area weights from 200-900 g/m2 and is wound onto a paper core, wrapped in plastic film, and packaged in cartons or containers. It should be stored in a dry, cool area between 35-65% humidity.

Uploaded by

Randy Cerna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
496 views1 page

TDS CSM

This technical data sheet provides information on E-glass chopped strand mat material. It has properties including silane coupling agent, high strength, good mat integrity, and low fuzz during manufacturing. The mat comes in various area weights from 200-900 g/m2 and is wound onto a paper core, wrapped in plastic film, and packaged in cartons or containers. It should be stored in a dry, cool area between 35-65% humidity.

Uploaded by

Randy Cerna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TECHNICAL DATA SHEET

MATERIAL NAME: E-GLASS CHOPPED STRAND MAT


MATERIAL CODE: EMC

Chopped Strand Mat is most widely used in hand lay process and can also be used in filament
winding, compression molding and continuous laminating process. The end application can be various
panel, bath automotive parts and cooling tower.

PROPERTIES
1. Silane coupling agent
2. High strength
3. Good mat integrity
4. Low fuzz during manufacturing process
5. high dry and wet tensile strength
6. Good wetting-out
7. Excellent flexibility

TECHNICAL CHARACTERISTICS

Product code Area weight Breakage Loss on ignition Moisture Binder


( g/m2 ) Strength (%) (%) Type
ISO3374 (N) ISO1887 ISO3344
ISO3342
EMC200 200-5%+10% ≥60 3.6-6.3 ≤0.20
EMC225 225-5%+10% ≥60 3.6-6.3 ≤0.20 Powder &
EMC250 250-5%+10% ≥60 3.6-6.3 ≤0.20 emulsion
EMC300 300-5%+10% ≥90 3.2-5.4 ≤0.20
EMC450 450-5%+10% ≥120 2.5-4.2 ≤0.20
EMC600 600-5%+10% ≥150 2.3-3.9 ≤0.20
EMC900 900-5%+10% ≥180 2.1-3.6 ≤0.20

PACKAGE
EMC is wound onto a paper core and then wrapped up with plastic film then put into cartons. Rolls can be
load into container directly or on pallet.

Storage

Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is
recommended that the room temperature and humidity should be always maintained at 35%-65%
respectively.

You might also like