Expert in Process Control And Instrumentation

PRODUCT
CATALOG
www.hanang-instrument.com
 Forewords Contents

Distributed Control System (DCS) - PlantCruise ___________________________________ 5

HMI SCADA - Experion HS ___________________________________________________ 8
Hybrid Controller - HC900 ____________________________________________________ 10
PT. HANANG GEMA INSTRUMENT Programmable Logic Controller (PLC) - Master Logic ______________________________ 12
Expert in Process Control And Instrumentation Controller - Indicator _________________________________________________________ 15
Controller - Programmer ______________________________________________________ 16
Recorders __________________________________________________________________ 17
PT. Hanang Gema Instrument is a company specializing in process control & Pressure ___________________________________________________________________ 19
instrumentation, based in Jakarta, Indonesia. This catalog’s publication coincides with the Temperature ________________________________________________________________ 21
20th year that we have been serving our customers. This milestone has given us great Configuration Tools __________________________________________________________ 22
confidence that we have been serving our customers well and we will strive to improve Flowmeter _________________________________________________________________ 23
our service for the future. Level Measurement - Radar type _______________________________________________ 24
Wireless Solution - One Wireless _______________________________________________ 25
In this second volume of our company catalog, you will be able to find many products that Liquid Analyzer _____________________________________________________________ 27
we represent. The product range is one of the main ways we have been able to serve our Gas Analyzer _______________________________________________________________ 31
customers. We constantly review our products to ensure that we offer quality products to Electric Actuator ____________________________________________________________ 32
meet our customer needs. Control Valve _______________________________________________________________ 33
AutomaticTank Gauging - Enraf ________________________________________________ 41
Since the last catalog publication, PT. Hanang Gema Instrument has grown to better Pressure, Temperature & Flow Switch - FEMA ____________________________________ 43
serve the needs of our customers. We have been expanding our engineering capabilities Burner & Boiler Control ______________________________________________________ 45
in order to tackle more complex projects. We have been focusing on providing engineering Gas Train System ____________________________________________________________ 48
expertise on top of the instrumentation equipments. We believe that this provides the Flame Monitoring ___________________________________________________________ 49
maximum value and consistent high quality at the lowest cost for our clients. Limit Switch _______________________________________________________________ 51

We would like to thank our loyal customers, without whom the past two decades would
never have been possible. PT. Hanang Gema Instrument is a company dedicated to
provide control instrumentation solutions for our customers. We hope to be able to
continue building successful partnerships and we look forward to creating new and lasting ORCA Sonar Sludge Level ____________________________________________________ 54
relationships with our future customers. SULTAN Level Measurement __________________________________________________ 55
GLADIATOR Level Switch ___________________________________________________ 56

Yours sincerely,
Handoko Susanto
Director Flowmeter : Oval Gear, Turbine, Paddlewheel, Impeller, Flow Instrument, Custody
Transfer ___________________________________________________________________ 58

Level Transmitter ____________________________________________________________ 67

Level Switch, Flow Switch ____________________________________________________ 68
Display & Control ___________________________________________________________ 71

1 www.hanang-instrument.com sales@hanang-instrument.com 2
 Contents

Flowmeter - Pitot Tube _______________________________________________________ 73

Flowmeter - Ultrasonic _______________________________________________________ 75
Honeywell Industrial Process Control provides a
comprehensive lineup of control products for your
industrial process measurement and control requirements,
and safety products for machine control. Honeywell IPC
comprises three businesses: Process Controls, Field
Infra Red Thermometry _______________________________________________________ 78 Measurement, and Machine Control & Safety. A broad
range of solutions and support services are available
globally, whenever and wherever you need them.

Products include Distributed Control System (DCS), Hybrid

Gas Analyzer : Oxygen, H2S, CO _______________________________________________ 80 Controller, PLC, HMI SCADA, Pressure Transmitters,
Temperature Transmitter, Flowmeters, Control Valves,
Positioner, Electric Actuators, Smart Sensors and Analytical
Instruments, PID Controllers and Indicators, Circular and Strip
Chart Recorders, Paperless Recorders, Machine Safety
Signal Isolator & Transmitter __________________________________________________ 82
Products, and more.

Liquid Analyzer _____________________________________________________________ 84

Engineering Capability
_______________________________________________________ 86

PT. HANANG GEMA INSTRUMENT

Plaza Kebon Jeruk Block D-5, Jl. Raya Perjuangan Kav.35, Jakarta 11530
Ph. (62-21) 532 4665 / 536 2813 / 5365 1464, Fax (62-21) 530 6276
E-mail : sales@hanang-instrument.com ; Website : www.hanang-instrument.com

3 www.hanang-instrument.com
 Distributed Control System Distributed Control System
PlantCruise by Experion Safety Manager

As a member of Honeywell’s Experion family, PlantCruise by Experion is specifically designed to meet the Safety Manager performs on Integrated Safety Integrity Level (SIL) 3
customer needs in emerging markets, through integrating state-of-the-art technology from the award-winning capability level which is the highest safety level required for most process
Experion Process Knowledge System (PKS) with innovative design of Series 8 I/O modules and cabinets, industries. Process security is maintained independently from the main
easier engineering and maintenance capabilities, and integrator-friendly programs and tools. control system. The result is a unified safety system solution that elevates
safety and process availability—as well as production and profitability.
PlantCruise is the perfect flexible platform for sites with small to medium complexity. Any sized installation
has access to a robust historian, controller-based batch sequencing, advanced control, change control for PlantCruise C300 Controller
validated sites and reporting capabilities. The solution can scale from one engineering station, one operator
station and one controller to multiple operator stations, redundancy and batch management. In addition, the Honeywell’s C300 Controller provides powerful and robust control for the
system provides reliable communication with third-party devices and drives. PlantCruise system. The C300 is a node in operating Honeywell’s
field-proven deterministic Control Execution Environment (CEE) core
software. The CEE software provides a superior control execution and
scheduling environment. Control strategies for each controller node are
configured and loaded through a common Control Builder, an easy and
intuitive engineering tool. In addition to a standard and robust library
of pre-built function blocks and algorithms, the C300 Controller also
supports Custom Algorigthm Blocks (CABs). Custom Algorithm Blocks
are similar in purpose and structure to the standard function blocks that
are distributed with Control Builder. However, CABs have user-defined
algorithms and data structures, , allowing custom tailored strategies to be
developed to specific
requirements.
PlantCruise Series 8 I/O modules & cabinets

Series 8 I/O modules offer the following

high-availability features:

• The innovative slanted angle directs heat flow

evenly through the cabinet, keeping components \
cooler to improve product lifecycle.

• With no common backplane, opportunities for

failure are eliminated; and more importantly, the
scope of loss of multiple components is significantly

• Fuses are not required due to enhanced Field Wiring

PlantCruise Engineering Station Protection
A PlantCruise Engineering Station or redundant Engineering Station combination functions as a system- • Modules are available in redundant configurations.
wide historian and global database. The PlantCruise Engineering Station also supports communication to
SCADA point sources, DSA point sources, OPC clients and Engineering Stations and holds the system With a redundant base assembly, a second module
event journal, system configuration files, custom applications and server scripts. The Engineering Station can be added at any time to create a redundant pair.
is the source for data, alarms, events, etc. for the client connected applications. One or more PlantCruise
Engineering Stations are required for an PlantCruise system. • Honeywell’s patented Fault Tolerant Ethernet
provides the backbone between the modules,
PlantCruise Direct Station delivering a robust and cost-effective infrastructure.
Direct Stations can directly access process data, alarms and messages from C300. With no loss of viewing
critical data and alarms when the engineering station fails, an operator can control and monitor the process
adequately.

5 www.hanang-instrument.com sales@hanang-instrument.com 6
 Distributed Control System HMI SCADA
Fault Tolerant Ethernet Improves Industrial Plant Performance Experion HS
Fault Tolerant Ethernet (FTE) is a high-performance, low-cost networking solution for industrial plants. Experion HS is a powerful software platform that incorporates innovative applications for human machine
FTE reduces commissioning and maintenance costs and increases system availability by providing the interface applications (HMI) and supervisory control and data acquisition (SCADA). Built upon the proven
performance, determinism and security required for industrial control applications. technologies of the Experion platform, Experion HS is an integrated and affordable solution for smaller unit
operations.
Control Execution Environment (CEE) Provides Reliable Execution and Scheduling
The Control Execution Environment (CEE) is the foundation for PlantCruise controllers, providing a
deterministic and reliable execution and scheduling environment in Honeywell control platforms,
including :
• C300 Process Controller
• C300 Simulation Environment

ProfitLoop – patented by Honeywell PlantCruise - C300 CPU

By anticipating future changes, Profit Loop knows exactly
how much to move the process to meet desired control
objectives. This innovative model-based technology
increases control performance while reducing maintenance
costs by as much as $100,000 per year on critical loops.
Profit Loop technology can be applied to any regulatory
control strategy where PID control is used. This efficient
technology allows customers to use Profit Loop on every
loop in the plant or mill, without additional license fees nor Since its launch, Honeywell’s Experion® Process Knowledge System (PKS) has successfully helped
does it reduce performance in their C300 Process Controllers. thousands of customers worldwide improve productivity and profitability. Experion HS extends this
proven technology to meet the demands of specific industry segments. Experion HS is as robust
Distributed System Architecture for Easy Scalability and powerful as Experion PKS and can efficiently fulfill the requirements of small to medium
Honeywell’s innovative Distributed System Architecture size applications. It is an easy and intuitive solution that can be used by plant managers, plant
(DSA) enables one to integrate multiple PlantCruise clusters maintenance engineers, process engineers and operators in many industries including oil & gas,
into a single operational system through LAN without mining, metals & minerals, chemicals, life sciences, power, cement & glass and food & beverage.
With the C300 and the CEE, customers
extra engineering configuration efforts. All the points,
can:
alarms and displays defined in another cluster can be
accessed by any user as if they are in the same system. Features :
• Improve engineering productivity and • Complete Client/Server System Out-of-the-Box with real-time database & open connectivity
A low cost yet high performance solution is available
maintenance with rich function libraries and • Standard History Collection limited only by storage media size
for possible expansion of a plant where separate one seamless intuitive user environment,
PlantCruise systems are located in different places. • Flex Station’s Versatile Operator Interface with Static Station for full time operation or Rotary Station for
• Maximize process uptime with a robust staffs who do not need full time access
deterministic software environment and full • Powerful Trending Increases Operator Effectiveness with up to 32 pens per trend display
View Data from Multiple Systems from a Single hardware redundancy
• Group Displays Provide Intuitive Operation
Operator Interface • Reduce production costs with flexible and
• Integrated Alarm and Event Management. Alarm and event analysis feature improvements are based on
Honeywell’s patented HMIWeb technology merges efficient control strategies, on-process
research relative to technologies for improving the handling of process upset conditions.
process, application and business data seamlessly from migration, and efficient hardware processing
• Honeywell Safety Manager Integration
the secure Experion Station environment or directly from power.
• Honeywell MasterLogic Integration Honeywell HC900 Integration
standard Internet technologies, such as HTML and XML.
• Experion DNP3 Interface & Historical Back-filled Recipe Management
• Built-in Reporting Scripting capability
PlantCruise delivers the integrated benefits of a
DCS with the flexibility of system size for projects “Honeywell can provide a truly integrated, • Flexible Access to Data : ODBC Driver, Microsoft Excel Data Exchange, OPC Server
flexible and highly reliable approach to batch • Efficient Engineering Environment : HMIWeb Display Builder, Quick Builder Database Tool, Embeded
involving 1,000 to 133,000 points. PlantCruise offers
process control for small and simple to large comprehensive documentation.
improved lifecycle costs over alternative solutions
and complex applications.” • Alarm Pager Option : When important information needs to reach people outside the control room or site,
due to the innovative design of Series 8 I/O modules
the Alarm Pager uses paging, SMS, e-mail or SNMP traps to escalate operational and system alarms.
and cabinets, many COTS options validated by
Honeywell, easier engineering and maintenance, John Blanchard, ARC Briefing • Point Control Scheduler Option allows the user to schedule supervisory control actions at specified times.
and flexibility that come with the system.

7 www.hanang-instrument.com sales@hanang-instrument.com 8
 HMI SCADA Hybrid Controller
Features continued: HC900 Hybrid Controller
• Electronic Signatures Option. Experion HS provides enhanced capabilities to support the pharmaceutical
industry and other U.S. Food and Drug Administration (FDA) regulated industries and their unique HC900 Control Designer Software
HC900 Controller (4 and 12 slot I/O racks)
requirements related to regulations such as 21 CFR Part 11. with 900 Control Station and Hybrid Control
Designer software Configuration Off-line, with run mode editing
• OPC History Data Access Option. The optional OPC History data access client further complements the
open connectivity portfolio of Experion HS. OPC HDA can be used to retrieve historical process data into Operating Environment Windows NT, 2000 or XP
other databases. PC Pentium, 200 MHz with 64 MB RAM minimum,
• Experion IEC-870 Communication Driver Option, provides SCADA communication and data exchange SVGA or greater screen resolution
between RTUs using standard IEC protocols such as 60870-5-101 and 60870-5-104. Cable 9-pin RS232 null modem cable configuration port
• Honeywell Digital Video Manager. Combined with Experion HS, operators can view and control video as or Ethernet 10Base T (crossover)
well as monitor and control the plant or mill from a single user interface, greatly improving productivity. Modem Support Monitor, upload, download configutariton
• Experion eServer Option, enables users from any location on the business network to view Experion HS
custom process graphics securely, from their web browser.
Controller:
• Modular L/C design
• Multiloop PID Control
• Setpoint programmers,
HC900 Controller
scheduller
Analog Inputs Up to 480 universal analog inputs, 960 high level
• Process logic, timers,
Accuracy +0.1% of span (field calibration to +0,05% of span)
counters
Analog Outputs Up to 200; user specified span from 0 to 20 mA maximum,
• Process algorithme,
12 bits, 0.1% Accuracy calculations
Digital Inputs/Outputs Up to 1920, contract D, 24 Vdc DI/DO • Universal analog inputs
120 Vac DI/DO, 240 Vac DI/DO, relay DO • Stores setpoint profiles,
Function Blocks C70, C70R CPU-5000; C50 CPU-2000; C30 CPU-400 recipes
I/O Racks Per System Up to 5 total • Remote Terminal Panel
Control Loops PID, on/off, cascade, ratio, %C, RH, dewpoint (RTP)
Control Output Types Current, time-proportioning, position proportioning, • Redundant CPU’s, power
three-position step supplies
Setpoint Programmers 50 segments each, 16 event outputs, profiles stored in controller
Setpoint Scheduller 50 segments, 8 ramp/soak outputs, 8 auxiliary outputs, Control Designer Software:
16 events, schedules strored in controller • Windows NT, 2000 or XP
Recipes 50 variables each • Drag & drop soft wiring of
Communication Ethernet 10base T; Modbus/TCP protocol; up to 5 Ethernet host;
function block object
up to 9 peer to peer controllers; Serial Modbus RTU; RS485 or
RS232, Slave (up to 16) or master operation • Configures operator displays
HS SCADA Architecture
Power Supply 120 Vac to 240 Vac or 24 Vdc • Load configuration
Operating Temp. 0o to 60o C (0o to 140o F) via ethernet, serial
Humacity 10% RH to 90% RH, non-condensing communications modem or
Rack Sise 4 Slot 8 Slot 12 Slot floppy disk
266.7 mm 419.1 mm 571.5 mm • Graphic hard copy records
(10.5 in) (16.5 in) (22.5 in) • Load/upload, monitor
configuration via modem
• Database export in CSV or
TAB DELIMITED format

9 www.hanang-instrument.com sales@hanang-instrument.com 10
 Hybrid Controller Programmable Logic Controller
Modular design creates Master Logic 200
The size of MasterLogic-200 can be deceptive. It looks so small and compact. But, just install them in a

board application versality

cabinet and power on for ac control application. The power, performance and versatility of ML-200 would be
simply amazing.

900 Operator Interface HC900 Controller Rack SCADA PC

Remote Rack Remote Rack Remote Rack Remote Rack Modular and Scalable
MasterLogic 200 PLC is modular, scalable and rack-based. The PLC can be either stand-alone or distributed
with peer-to-peer connections. The CPUs, power supplies and rack sizes are available in various models to
Max. for best fit a particular application.
Function Point Per Module Max. for C30 CPU Max. for C50 CPU
C70/C70R/CPU
Key Features
Universal: 8 Universal: 96 Universal: 480 Univesal: 480 • Powerful and versatile processors – high speed i.e.42 nanosec/step, 7MB program (including system
Analog In emory), 4MB system memory, 2MB data memory, 16MB built-in flash memory for program and data
High level: 16 High level: 192 High level: 960 High level: 960
backup
Analog Out 4, 8, 16 40 200 200 • Full redundancy (CPU, power and network) – same CPU can operate in both redundant & non-redundant
mode.
Analog Out • Compact pocket size modules – rack room and cabinet space saver
8, 16 192 960 960
(External power) • IEC61131-3 standard programming – LD/ SFC/ ST/IL language option
• A vast library of standard function blocks and support new or user-defined function blocks
Digital In 16 or 32 384 1920 1920
• Over 50 types of I/O modules – digital/ analog (isolated), HSC, RTD, TC, position/ motion control
Digital Out 8 AC or 16 DC, 32 384 1920 1920 • Open network protocols with field devices – Profibus™ DP, DeviceNet™, MODBUS (Ethernet & Serial)
• Open communication with external systems – Ethernet, fiber-optic (100MBPS), serial RS232/RS422
Function Blocks n/a 400 2000 5000 • Peer-to-peer communications between PLCs – Dedicated Ethernet 100 MBPS or Fiber-optic option
• Smart I/O modules (DIN rail) on open protocols – Profibus-DP, DeviceNet, MODBUS expanding I/O capa-
city, remote I/O applications or as RTUs for other manufacturers’ PLC
• Hot swapping, Interrupt programs, user-defined Events (for SOE data in ms)
• Smooth Integration with PlantCruise by Experion and Experion HS.
• Self-diagnostics – network diagnostics, system logs, Auto scan, monitoring system
• Engineering software – ease of configuration and trouble-shooting
• Program simulator to test programs offline without PLC/CPU.

11 www.hanang-instrument.com sales@hanang-instrument.com 12
 Programmable Logic Controller Programmable Logic Controller
Close Integration with PlantCruise by Experion, Experion HS, Experion LS
MasterLogic PLCs are tightly integrated with the Experion architecture. They directly reside on the FTE or
Ethernet network of PlantCruise by Experion and the Ethernet network of Experion HS and
Experion LS, eliminating the need for any intermediate gateway equipment.

Typical Applications
• Process Industries: oil and gas, steel, cement, power generation, chemicals, petrochemicals
• Automobile industries
• Food and Beverage
• Healthcare and Pharmaceuticals
• Textiles
• Material handling
• Water Treatment
• Semi-conductors
• Printers and Publishers
• Paints and Plastics Fast Ethernet Network
• OEM – partnerships with packaged equipment

MasterLogic 50
Compact PLC
ML50 series is extremely compact providing both powerful functions and performance. The dual
combination of Compactness & Performance is what makes ML50 such an ideal product.

Master Logic 50 Configuration

Wiring with Smart Link Cable Set

H-type CPU– Max. 10 expansion I/O Modules S-type CPU – max. 7 expansion I/O Modules

13 www.hanang-instrument.com sales@hanang-instrument.com 14
 Controller - Indicator Controller - Programmer

15 www.hanang-instrument.com sales@hanang-instrument.com 16
 Recorders Recorders

17 www.hanang-instrument.com sales@hanang-instrument.com 18
 Pressure Transmitter Pressure Transmitter
Redefining Smart—A New Level of Advanced Graphics LCD Display:
• Up to eight separate screens with three formats to meet unique
Pressure Measurement display requirements: process variable, bar graph and trend
• Full library of engineering units with the ability to add custom units
Honeywell’s SmartLine® series smart measurement system sets a new • Configurable screen rotation timing
standard for total performance in harsh process environments, featuring • Supports multiple languages
the industry’s first modular and most robust pressure transmitters. The • Two diagnostic indications
SmartLine pressure transmitter delivers total value across the entire • 90-degree position adjustments to facilitate all installation positions
plant lifecycle, from construction, operations to maintenance. With • Square root display capabilities may be set separately from the 4-20
better performance, modular construction, an advanced display and the mA DC output signal
best integration features available when used with Experion® PKS or
PlantCruise DCS, Honeywell helps our customers reduce project costs
and startup time, avoid unplanned downtime, improve product quality,
Flexible Configuration
In addition to configuring with any handheld
reduce spare parts inventory and shorten time to repair.
device or through asset management DTMs,
users can configure the transmitters through
Honeywell transmitters are recognized for their externally accessible buttons, even in an
unsurpassed accuracy and performance. intrinsically safe, Class I, Div. 1 environment.
Now, the SmartLine series has enhanced that This can be done both on the bench for
reputation even further with industry leading total set up and in the field without needing a
performance: handheld device.
• Transmitter stability — 0.01%/year
• Reference accuracy — 0.035% span standard, 0.025% Polarity Insensitivity
span optional SmartLine transmitter wiring can be reversed without damaging or effecting the normal operation of the
• Total probable error as good as 0.12% transmitter. This avoids costly rework on large installations where multiple contractors may use different
• Response time — 80mS or faster wiring standards and eliminates return trips to re-wire “incorrectly wired” devices.
• In-built /on-board static pressure and temperature
compensation Integration with Experion PKS or PlantCruise DCS
• Rangeability / Turndown of up to 400:1 It provides the operator with a summary health status of a transmitter or
• Unequaled local display capabilities group of transmitters.Device identification in the field is simplified using our
• External zero, span and configuration capability unique transmitter messaging capability. Safe maintenance modes are also
• Polarity-insensitive electrical connections
confirmed through maintenance mode indication. These together identify
• Comprehensive on-board diagnostic capabilities
• Integral dual-seal design for safety based on ANSI/
the right product, the right maintenance activity and a safe mode to perform
NFPA 70-202 and ANSI/ISA 12.27.0 maintenance.
• World-class static pressure rating—4500psig with the
option up to 6000psig
• Full compliance to SIL 2/3 requirements as a standard
• Available 15-year warranty
• Multiple performance tiers available: ST 800 and ST
700

Modular Design
All SmartLine pressure transmitters are modular in
design, making it easy to replace hardware, add
indicators, change electronic modules or even
meter bodies without affecting overall performance
or infringing on approval body certifications.

19 www.hanang-instrument.com sales@hanang-instrument.com 20
 Temperature Transmitter Configuration Tools
Smart Temperature Transmitter - Model STT170 MCT202
Honeywell MC Toolkit
Model MCT202 Honeywell MC Toolkit handles
STT171
multiple communication protocols, letting you configure,
• Analog 4-20 mA output
monitor, diagnose, and manage smart devices from
• RTD or Ohm input
• DIN form B headmount
Honeywell and other suppliers.
• NAMUR NE43 sensor error
response • Configures both DE and HART protocols
• Configurable using STT17C • Automatically verifies device identification and
configuration tool and PC database configuration
STT250 • Provides full self-diagnostic and device diagnostic
Smart Temperature Transmitters support
STT173 • Universal sensor inputs • Configures any HART Device with a published HART
• Analog 4-20 mA output • Compact size allows direct head mounting Device Descriptions (DD), regardless of device
• RTD, T/C, Ohm or mV input • Broad selection of housings and materials manufacturer
• DIN form B headmount • Remote communications
• NAMUR NE43 sensor error • Available with integral engineering units SCT3000
response meter Smartline Configuration Toolkit
• Configurable using STT17C • Dual input model with advanced diagnostics This PC-based tool allows quick, error-free configuration
configuration tool and PC and redundant sensor for critical applications
of Smartine products.
• Support 4-20/HART Version 5 and 6/DE
Output
STT17H • Access to configuration database parameters
• Sensor matching function
• HARTTM /4-20 mA output • Supports EDDL and DTM
• Verifies all parameters are correct
• RTD, T/C, Ohm or mV input • TUV SIL2 Certification for safety applications • Enables "Management of Change"
• Single or dual (difference in • Microsoft Windows 95b, 98, NT (4.0), 2000 and XP
average) sensor input
• DIN form B headmount
• HART Multidrop capable
• NAMUR NE43 sensor error
response
• Galvanic isolation

STT800 The “Old” Flow Approach

Temperature Measurement Assembly
The STT800 is an installation-
ready temperature
measurement assembly for any
of the STT3000 transmitters,
STT350
sensor heads, thermo wells and Smart Temperature Transmitters
process connections. It is available • For applications requiring the ultimate in
in short delivery cycles and comes with performance and advanced solutions
custom calibration and agency approvals. • One model for most thermocouples or RTDs
These are high quality probes with an exceptional level of (2-, 3-, or 4-wire)
support that provide ease of engineering, procurement and • No board change, potentiometer adjustment,
installation. or calibration required
• Remote configurability and rangeability The “New” Flow Approach
The STT800 is offered in three models: • Explosion-proof housing on DIN rail
• STT820 - Rigid probe assembly mounting
• STT830 - Threaded and socket weld thermo well assembly • Remote communications for configuration or
• STT840 - Drilled and flanged thermo well assembly diagnostics, Delta T, and redundant sensor
• ATEX, CSA, FM Approvals available on all the STT800 capabilities are standard
assemblies

21 www.hanang-instrument.com sales@hanang-instrument.com 22
 Flowmeter Level Measurement
Accurate and reliable flow measurements for the most demanding applications. SmartLine Non-Contact Radar Level Meter

Highlights
• Standard accuracy ±3 mm (±0.04 in)
• Reliable measurement in difficult process conditions
• Operates up to a flange temperature of 200°C (390°F)
and 40 barg (580 psig)
• Measuring range up to 80 m (260 ft)
• Long antenna versions can be extended to suit nozzle
length
• Configuration software and HART DTMs included as
standard
• Optional second current output
• Direct-accessible graphic touchscreen/wizard (option)
• Converter rotates 360°
• Triple barrier gas-tight protection available for working
with dangerous gases (using pre-stressed fused glass)

SmartLine Guided Radar Level Meter

Highlights
• Displays level and interface
• Easy navigation using a touch screen without
opening the housing (installation wizard)
• Configuration software and DTMs included as
standard
• Optional second current output–used for displaying
interface measurements, for example
• Higher signal dynamics and sharper pulse improve
accuracy
• Display in 9 languages–Including Chinese, Japanese
& Russian

23 www.hanang-instrument.com sales@hanang-instrument.com 24
 Wireless Solution Wireless Solution

The Honeywell OneWireless™ Network is a multi- XYR 6000 Transmitters

application network that can be tailored to offer the XYR 6000 transmitters provide highly accurate
wireless coverage needed for industrial applications; from pressure, temperature, analog input, valve
a simple field instrument network (ISA 100.11a) to a position, digital input measurements or a digital
completely integrated, plant-wide multi-application network output, and transmit the
(Wi-Fi and ISA100.11a). OneWireless solutions offer measured value wirelessly using the 2.4 GHz
several benefits beyond avoiding wiring costs; helping ISM band and ISA100.11a open protocol to a
customers optimize plant productivity, ensure safety, meet Honeywell Mutinode or Field Device Access Point
regulatory compliance and improve asset reliability. gateway. XYR 6000 transmitters
Supporting XYR 6000 wireless transmitters and the provide the ability to obtain data from remote and
OneWireless Adapter, this network delivers a global hazardous measurement locations without the
solution with robust security, predictable power need to run wires.
management and multi-speed monitoring. Attributes and
benefits include: OneWireless Adapter
The OneWireless Adapter (OWA) transforms
• Single plant wide wireless infrastructure for lowest total a HART device into an ISA100.11a compliant
cost of ownership wireless device,
• Open, standards based system providing choice of transmitting this valuable information back to a
product and supplier host system wirelessly. The OWA provides access
• Best integrated industrial security available today to: 4 HART dynamic variables (PV, SV, TV, FV),
• Extremely reliable mesh system—field proven for best multivariable data, calibration and diagnostic
uptime information, device configuration
• Flexible and scalable for designing the network that best parameters.
fits the application need
XYR 3000 Wireless Multiplexer I/O,
Modems and Gateways
XYR 3000 products provide a simple and reliable
means of implementing a wireless solution for
applications with
high-density I/O concentrations, providing the
lowest cost per wireless measurement point,
enabling new applications. Gateway and modem
products provide wireless interfaces between data
buses such as Ethernet, RS232 and RS485.

25 www.hanang-instrument.com sales@hanang-instrument.com 26
 Liquid Analyzer Liquid Analyzer
The Most Versatile Multiple Input Analyzer HPW7000 Hi-pHurity Water pH Measurement System
Accuracy and stability are combined with simplicity in this electrode mounting assembly for
measuring pH in high purity water applications. A specially designed flow chamber provides
UDA2182 Series Universal Dual Analyzer
optimal flow patterns and volume. The electrode cover and holder is eyed so that proper
pH, ORP, Conductivity, Dissolved Oxygen alignment is maintained during installation.
• Mix-n-Match process measurements
• Fast & Easy commissioning – even wireless configuration An easy to remove clamp secures the cover and makes
• Entire status at a glance – graphic LED display electrode removal for calibration or maintenance fast and
• Full global support of Honeywell Process Solutions easy. Electrode and cable shielding ensures a stable pH
reading. The reference electrode is easy to refill and maintain.
A calibration cup holder allows the user to calibrate right at the
The UDA2182 Series is a versatile, dual or single input analyzer that measures pH, ORP, contacting assembly and saves calibration time.
Conductivity and Dissolved Oxygen. The “mix-and-match” PWB design offers the user flexibility for a wide range
of applications. Its common form, fit and function to older Honeywell analyzers make it a quick and easy retrofit
into existing panels and installations 4905
In-Line, Flow Chamber, or Immersion
• Single or dual input for pH, ORP, contacting • Up to 4 alarm relays Mountings/General Purpose Conductivity
Conductivity or Dissolved oxygen • Backlit graphical LED display
• Dual input in any combination of measurements • Nema 4X/IP66 case 4909
• PID control option • Infrared PC & Pocket PC configuration Ball Valve Mounting for
• Up to 3 analog outputs • FM/CSA Class 1, Div 2 approval Insertion/Removal

4973
In-Line or Flow Chamber
APT 2000/4000 Analyzers & Transmitters: Mountings for Low
Honeywell’s APT Series offers both an analyzer and a transmitter Conductivity Measurements
design. It has a large, easy to read display with a user interface
that is easy to understand.
• USP26 Alarm Capabilities
• FM Class I, Div 1 (I.S) rating
• 120/240 Vac or 24 Vdc loop power
• pH, Conductivity (contacting & toroidal), and ORP models Process Measurements don’t have to be Complicated
The DirectLine family of sensor modules provides an easy solution to simplify common process measurements.
Honeywell’s patented sensor technology ensures reliable and stable measurements. The DirectLine architecture
7777 Series 7758 Series
7773 Series combines the sensors and transmitters into a single easy to use device.
In-Line or Submersion Pipeline Electrode Mountings DirectLine® Series
Multi-purpose pH and ORP pH/ORP Electrode for Industrial pH and ORP • Easy-To-Install: Integral sensor/electronics reduces wiring,
Electrode Mountings Mountings cable runs and panel cutouts
• Easy-To-Use: Local display and keypad allows easy set-up,
calibration and operation
• Easy-To-Maintain: Plug-in sensors make replacements a
snap!

DirectLine Sensor Module at a Glance

TL1000 Twist • Measurement: pH, ORP, Contacting Conductivity,
Lock Electrode Mounting Dissolved Oxygen
7774 pH Series and ORP Electrode Model 7794
• Mounting: Integral to the sensor or remote mounted; pipe,
Insertion/Removal Assemblies Sanitary Durafet II pH Mounting
wall, or DIN rail
• Enclosure: Type 4X, IP 66, Plastic Case
• Display: LCD 4-Digit, 7-Segment
• Output: One 4–20 mA
• Power: 16-42 Vdc Loop Powered
• Approvals: CE, UL, CSA, FM

27 www.hanang-instrument.com sales@hanang-instrument.com 28
 Liquid Analyzer Liquid Analyzer
Sodium Analyzer Series 2131C Features :
• Accurate and wide-range analysis
Overview : • Multi-stream (up to eight streams)
• Short cycle time
The 2131C Sodium Analyzer is the most advanced on-line instrument specifically developed for use in • Automatic reagent detection
continuous measurement and determination of sodium ion concentration. • Adjustable cycle and calibration frequency
• Automatic calibration and validation (QA/QC)
Features : • Small size
• Wide analysis range: 0.01ppb – 10ppm • Touchscreen display
• Low maintenance • Grab sample
• Very low reagent and standard consumption • Internal datalogger
• Self diagnostics • Automatic start/stop based on sample flow detection
• Stable pH through vapor buffering
• No change of diffusion tubing
• Automatic range selection
• Process calibration – calibrate to sample
• Two 4-20 mA isolated current outputs Hydrazine Analyzer Series 2171C
• 3 relay contacts for high, low and general alarm
• Large, easy-to-read 128 x 64 pixel graphic LCD display Overview :
• Internal diagnostics to show probe status The 2171C Hydrazine Analyzer is the most advanced hydrazine instrument specifically developed for use in
• Protection of sensor from “Hot Sample” continuous measurement and determination of hydrazine concentration in boiler feed-water.
• Automatic temperature compensation
• Communication interface via RS-232 & RS-485 using
Features :
MODBUS RTU protocol
• Wide analysis range: 0.01ppb – 1ppm
• User-configurable settings for recorder outputs and alarm
• Low maintenance
set points
• Very low reagent and standard consumption to be changed only every two months
• Automatically stores last 10 calibrations and alarm logs
• Self diagnostics
• Wide range of input power supply: 90VAC – 250VAC
• Stable pH through vapor buffering
• No use of highly toxic reagents such as diisoethylamine or
• No change of diffusion tubing
diisopropylamine
• Automatic range selection
• Process calibration – calibrate to sample
• Two 4-20 mA isolated current outputs
Silica and Phosphate Analyzer Series 2341 and 2342 • 3 relay contacts for high, low and general alarm
• Large, easy-to-read 128 x 64 pixel graphic LCD display
• Internal diagnostics to show probe status
Overview :
• Protection of sensor from “Hot Sample”
Honeywell’s latest 2341 and 2342 colorimetric analyzers provide • Automatic temperature compensation
exceptional results for online measuring of silica, phosphate and • Communication interface via RS-232 & RS-485 using MODBUS
other parameters. Small size and compact layout make the 2341 RTU protocol
and 2342 an excellent choice for a variety of applications and • User-configurable settings for recorder outputs and alarm set points
environments. • Automatically stores last 10 calibrations and alarm logs
Common application points in a boiler system for online silica • Wide range of input power supply: 90VAC – 250VAC
measurement include: make-up water, condensate, boiler • Rechargeable hydrazine cell
feedwater, saturated steam/main steam and cooling water.
Application points for phosphate include: boiler water and
cooling water, cycles, ensuring accuracy and reliability with every
application.

29 www.hanang-instrument.com sales@hanang-instrument.com 30
 Gas Analyzer Electric Actuator
HYDROGEN TRIPPLE RANGE GAS ANALYZER
Thermal Conductivity
A thermal conductivity system that measures concentrations of hydrogen purity and CO2 gas. This
measurement is typically made in hydrogen-cooled generators.

7866 Digital Thermal Conductivity Analyzer

The 7866 Thermal Conductivity Analyzer is designed
to provide a highly sensitive and accurate analysis
of a binary (2-components) mixture of gases. It uses
the principles of thermal conductivity, to determine
the concentration of sample gas through the
measurement of thermal loses from to highly stable, HercuLine Electric Actuators HercuLine 2000 HercuLine 2001 / HercuLine 2002 HercuLine 10260A / HercuLine 10260S
matched thermistor probes inserted in a stainless Product Description Low torque electric actuator Low torque electric actuator Medium torque industrial electric actuator
steel block. Torque 50 to 400 in-lb (6 to 45 N-M) 50 to 400 in-lb (6 to 45 N-M) 10 to 300 lb-ft (14 to 400 N-M)
7872 Gas Sampling System Stroke/Speed 90o to 150o / 6 to 75 sec 90o to 150o / 7.5 to 120 sec 90o /10/20/40/60 sec
The pre-package 7872 Sampling System provides a Input Signal Floating, Pos. prop., Open/Close 1-5 Vdc, 4 to 20 mA 0/1-5 Vdc, 0/4-20 mA, Floating,
complete pre-engineered panel designed specifically Pos. prop., Open/Close
for hydrogen-cooled generator applications in utility, Position Feedback 1000 ohms potentiometer 0/1-5 Vdc, 0-16 Vdc, 0/1-5 Vdc, 0-16 Vdc, 0/4-20 mA, SW
0/4-20 mA, SW emulation emulation 1000 ohms potentiometer
paper mills and other co-generation applications.
Position Sensing 1000 ohms potentiometer 2001 : slidewire Contactless
2002 : contacless
Sampling System 7872 Sample Panel H2 Purity Gas Analyzer 7866 Analyzer
Environmental -40o to 185o F (-40o to 85o C) -40o to 170o F (-40o to 75o C) -20o to 170o F (-30o to 75o C)
Construction 12 gauge steel, enamel finish, with components mounted Accuracy + 2% of span Duty Cycle Continuous Continuous Continuous
piped and tested
Response Time (for H2) Initial, <1 sec 63%, 13 sec, 90%, 23 sec, 99%, 40sec Repeatability N/A 0.2% of 90o span 0.2% span
Dimensions 53.7 x 76.2 x 15.4 cm (21 x 30 x 6 in)
(W x H x D) Measuring Range 1, 2 or 3 as specified Dead-Band N/A Adj. 2% to 5% span Adj. 2% to 5% span
Weight (approx.) 50 lbs (22.5 kg) Sample Requirement 0.2 to 4.2 cfh flow 37 mm Hg Pressure min. Local Auto/Man Switch Optional Optional Optional
(Sensing Unit)
Calibrating Gases CO2, H2 and 75% H2 in N2 Local Keypad/Display N/A Optional 10260S : Optional
Power Requirement Universal 90 to 264 Vac, 50 to 50 Hz
Sample Temperature Up to 104oC (220oF) (Control Unit) RS485 Modbus Comms. N/A Yes 10260S : Yes
Sample Pressure 1 to 100 psig (6.9 to 69 kPa) Weight 8.5 kg (18 3/4 lb)/1.3 kg (3.0 lbs)
(Sensing Unit/Control Unit) Herculine Electric Actuators Herculine Smart Actuators

Herculine Electric Actuators are Honeywell's new actuators incorporated all of the
engineered for exceptional reliability, quality and reliability features of the Herculine
accurate positioning of dampers and actuators with the added benefits of
7866 Sensor quarter-turn valves, they perform microprocessor-based electronics. These benefits
especially well in extremely demanding make it easier to
environments requiring continuous duty, install, set up and commision the actuator, while
high reliability and low maintenance. With allowing you to monitor the health parametes for
non-contact sensing, the maintenance proactive maintenance planning.
problems and unexpected shutdowns
associated with slide wires and • RS485/Modbus communications for remote
potentiometer waer are eliminated. access
• Programmable: Alarm and relay outputs;
Characterization, failsafe functions, dead-band,
7872 Sample and filtering; Direction of rotation
• Diagnostic Parameters: Maximum Hi and Lo
temperature; Stall and accumulated stall time;
7866 Control
Total travel

31 www.hanang-instrument.com sales@hanang-instrument.com 32
 Control Valve Control Valve
Series 9120 Seated Angle Valves Series 9110 Single/Double Seated Globe Valves ANSI 150 - 600
ANSI 150 - 600 / JIS 10K-40K DIN/BS 4504 PN10-PN40 / JIS 10K-40K DIN/BS 4504 PN10-PN40

General General
The Series 9120 Angle-type control valve is The Series 9110 control valves has been developed to
indispensable to control fluid of high differential provide a cost effective solution to the " final
pressure, slurry, high viscosity, or adhesive. They control element" used in modern plants.The valve
are provided with a number of features such as low design combines the successful high integrity features
resistance of passage, antiwear quality within the valve, of the series 9110 with a high capacity, economic
and easy maintenance and inspection. design philosophy as well as excellent control.

Performance : Performance :
High Cv to body size ratio High Cv to body size ratio.
Streamlined flow passages to optimize capacity Streamlined flow passages to optimize capacity. High
High Cv to valve weight ratio Cv to valve weight ratio.
Excellent flow control rangeability Excellent flow control rangeability.

Design Flexibility : Design Flexibility :

• Modular construction design available with a range of Modular construction design available with a range
different connections and styles. of different connections and styles.
• All trim components removable from the top for easy All trim components removable from the top for easy
of maintenance. of maintenance.
• Wide range of supplementary noise control options Wide range of supplementary noise control coptions.
Inherently characterized trim offered in equal Inherently characterized trim offered in equal
percentage, linear, quick opening and modified- percentage, linear, quick opening and modified-
parabolic (options) parabolic (options).
• Multi trim sizes available. Multi trim sizes available.
• Full range of body and trim material options. Full range of body and trim material options.
• Fully rationalized and interchangeable features. Fully rationalized and interchangeable features.
• Full range of bonnet and packing designs to suit Full range of bonnet and packing designs to suit
.various temperatures and fluids. various temperatures and fluids.

Specification Specification

33 www.hanang-instrument.com sales@hanang-instrument.com 34
 Control Valve Control Valve
Series 9130 Mixing / Diverting Seated 3-Way Valves Series 9210 High Performance Butterfly Valves
ANSI 150 - 600 / JIS 10K-40K DIN/BS 4504 PN10-PN40 ANSI 150-300 / JIS 10K-20K DIN/BS 4504 PN10-PN25

General
General The series 9210 butterfly valves has been developed for a large
Three-way type control valves are used for number of applications throughout process industries.
controlling the fluids mutually to three directional The series 9210 high performance butterfly valves is mainly
pipings, i.e., mixing service and diverting service. used for the control of fluids flowing in large valve at low
differential pressure. It offers additional advantages such as
Performance : simple structure and low cost.
High Cv to body size ratio
Performance :
Streamlined flow passages to optimize capacity
High Cv to valve weight ratio compared to conventional control
High Cv to valve weight ratio
valves.
Excellent flow control rangeability
Throttling controls 60° rotation, on-off controls 90° rotation.
Excellent control range ability.
Design Flexibility :
• Modular construction design available with a range Design Flexibility :
of different connections and styles. • Swing through and tight shut-off seated trim design. Flange
• All trim components removable from the top for connection versions available.
easy of maintenance. • Full range of bonnet and packing design to suit various
• Wide range of supplementary noise control temperatures and fluids.
options. Inherently characterized trim offered • Provides fire safe sealing, which combines a soft seal ring
in equal percentage, linear, quick opening and and metal seal ring.
modified-parabolic (options). • Full range of body and vane material options, with availability
• Multi trim sizes available. of hard factings.
• Full range of body and trim material options. Design Integrity :
• Fully rationalized and interchangeable features. Wafer type as standard. Double eccentric mechanism.
• Full range of bonnet and packing designs to suit Actuator mounting flange dimensions in accordanc with ISO 5211/1-1977
various temperatures and fluids. Quality Manufacturing :
Rigorously tested to ensure specified performance on site. Quality assurance
systems in accordance with ISO 9001.
Specification

Specification

35 www.hanang-instrument.com sales@hanang-instrument.com 36
 Control Valve Control Valve
Series 9410 Full Bore Seated Ball Valves
Series 9310 V-Notch Ball Valves ANSI 150 - 600 / JIS 10K-40K DIN/BS 4504 PN10-PN40
ANSI 150-300 / JIS 10K-20K DIN/BS 4504 PN10-PN25 General
Series 9410 ball valves are off-the-shelf standard valves
General that incorporate many special features. This series of
Series 9310 Valve is Top Entry, Full Bore, Trunnion, and valves is designed for both pressure and vacuum service.
stem ball type v-notched ball valve, which is exclusively The valves have multiple fire safe guards : a secondary
designed for excellent proportional control as much as metal seat ; a blowout-proof stem ; and a static electric
globe type control valves and manual valves. grounding device. The Valves are available with a full
Series 9310 have special shape of disc which is suitable bore and reduced bore.
for accurate throttling control and on-off service not only
Standard Specifications
general fluids but also critical condition in powders, slurry,
Flanged end, 2-pcs split body construction, Floating ball
gummy, fibrous material and other fluids having special
design, Full bore or reduced bore, Fields serviceable,
characteristics. wrench/gear/actuator mounted.

Performance : Valve Class : ANSI 150-600

High Cv body size ratio (Full bore) Controls through 90° Test Pressure : As per API 6D Std.
rotation Excellent flow control rangeability Easy
maintenance - Shell -
ISO standard Mounting Hole (Hydrostatic) Class 150 ; 425 psi (30 kg/cm2) Class 300 ;
1100 psi (77 kg/cm2)
Design Flexibility : - Seat -
• Direct Mounting Actuator Design Flexibility (Air) Class 150 ; 80 psi (6 kgf/cm2) Class 300 ; 80 psi (6
• Control any fluids kgf/cm2)
• Flow push seat design
• Full range of body and trim material options with Face to Face Dimension :
available of hard facings Per Apl 6D Std.(refer to dimension tables)
• Seat changeability End Connections :
• Dual characteristics (Equal or Linear) Self-cleaning and Flanged, conforming to ANSI B 16.5 The ball valves comply with one or more of the following standard
tight seating Double-eccentric disc options specifications as to pressure, temperature ratings and dimensions: ANSI, API, BS, DIN, MSS.

Specification Specification

37 www.hanang-instrument.com sales@hanang-instrument.com 38
 Control Valve Control Valve
Series 6100 Multispring Diaphragm Actuators Series 6200 Rotary Piston Actuators

General General
The Series 6100 Diaphragm actuators has been designed to control The Series 6200 Rotary piston actuator is designed to
accurately the flow and pressure of fluid in response to demand operate rotating valves, such as Ball valves, Butterfly valves
of fine process control as well as various plant systems. These and V-Notch valves for throttling or on-off service. This
actuators have been developed for powerful and high performance actuators are unique linkage type which converts linear
pneumatic actuating of linear motion valves as well as rotating motion torque at beginning which usually corresponds to the
valves. It consist of four spring which are produced for high stiffness closed position of valves, and another peak of torque is
that is defined as the ability of the actuator to with stand suddenly produced at 60 degree of valves which correspond to the
changing dynamic force of fluids acting on the valve stem. The action dynamic torque.
of valves can be changed by removing of the cap and four mounting
bolts, turning the actuator over, and replacing the cap. Performance :
Simple cost effective design Ideal high torque Reliability
Long stroke and wide application Low hysteresis
Strong seating force Light weight
Compact and light weight Easy maintenance

Performance : Design Flexibility :

Reliability High Power Full response Double acting and spring return acting
Low Hysteresis Single piston and double piston
Field Reversible Wide selection of optional accessories available
Wide adjustable range (maximum rotating angle - 110°)
Design Flexibility :
Reversible fail action without extra parts in the field. Design Integrity :
Wide selection of optional accessories available. Maximum torque at beginning and another peak torque is
Compact and simple design. produced at 60 - 80 degree in respond to torque of rotating
Inviolate rolling diaphragm simplifies actuator design. valves
Variable stroke up to 5". Mounting flange dimensions in accordance with ISO 5211

Design Integrity : Kind of Actuators :

Multi spring construction. Scotch Yoke Type
One piece spindle on top and bottom dry bushing guide. Low S(Spring Return Single Cylinder) D(Double Acting Single
stressed alloy steel springs. Cylinder) Linkage Type
Quality Manufacturing : SD(Spring Return Double Cylinder)
High quality material with trace ability throughout manufacture. DD(Double Acting Double Cylinder)
Quality Assurance system in accordance with ISO 9001.
Comprehensively tested to ensure specified preference on site.

Specification Specification

39 www.hanang-instrument.com sales@hanang-instrument.com 40
 Automatic Tank Gauging (ATG) Automatic Tank Gauging (ATG)

854 ATG Servo Advanced Tank Level Gauge

Features:
• Measuring range: 0 to 131 feet (0 to 40 m)
• Accuracy: ± 3mm
• Variety of antenna options to fit any tank
• Outputs: HART® and 4-20 mA analog signals, Modbus, or
Foundation Fieldbus
• Input boards for spot RTD, VITO probes for average
temperature and water measurement, HART® devices
• Modbus communication standard via RS-232C or RS-485

854 ATG Servo Advanced Tank Level Gauge

Features:
• Measuring range: Up to 246 feet (75 m); Resolution: 0.001 feet
(0.1mm)
854 ATG Servo Advanced Tank Level Gauge • Accuracy: Varies by model, ±0.4 mm, ±1 mm or ±3 mm
• Variety of antenna options to fit any tank
• Outputs: Standard Enraf Bi-Phase Mark for linking 10 devices
Features: with 1 single pair, up to 6 miles apart; Standard Modbus RTU RS-232
• Measuring range: 88 feet (27m) standard; Up to 492 feet
and RS-485, HART®; 900 series includes four SPDT alarm contact
(150m) optional
relays
• Accu racy: Level: ± 0.4mm
• Integrates with multiply spot and averaging spot temperature probes
• 2" 150 Lb or 200 Lb ANSI flange connection
• Full galvanic isolation transformers for lightning protection
• Cast aluminum enclosure, cast aluminum or stainless steel
• Approvals: Weights & Measures, API, ISO, IML, and OIML R85
drum compartment, stainless steel drum and shaft
• Outputs: 4-20 mA analog output plus two SPDT alarm (varies by model)
relays
• Input boards for spot RTD, VITO probes for average
temperature and water measurement, HART® devices 854 ATG Servo Advanced Tank Level Gauge
• Modbus communication standard
Features:
Measuring range and angle:
854 XTG Servo Transmitting Tank Level Gauge
Antenna diameter 40 mm 0 to 10 m
48 mm 0 to 15 m
Features:
75 mm 0 to 30 m
• Measuring range: 88 feet (27m) standard; Up to 492 feet
95 mm 0 to 30 m
(150m)
Instrument accuracy: 3 mm for free space
optional
Measuring resolution: 1 mm
• Accuracy: Level: ± 1mm
Ambient temperature: -40ºC to +80ºC without display and programming
• 2" 150 Lb or 200 Lb ANSI flange connection
module
• Cast aluminum enclosure, stainless steel measuring drum
-20ºC to +70ºC with integrated display and
and shaft
programming module
• Outputs: 4-20 mA analog output plus two SPDT alarm relays
Output signal: 4-20 mA analogue signal, max 22 mA
• Input boards for spot RTD, VITO probes for average
4-20 mA analogue with HART® communication
temperature
Profibus PA digital communication. constant 10 mA
and water measurement, HART® devices
Foundation fieldbus H1 digital communication, constant
• Modbus communication standard
10 mA

41 www.hanang-instrument.com sales@hanang-instrument.com 42
 Pressure Switch Temperature & Flow Switch
Electronic Pressure Switch PS, PST, PST-R series TST series Smart Temperature Switch
- Temperature range from -50ºC...+400ºC
Electronic pressure switch, with LCD display for the field of plant construction, - Housing mounted and cable-mounted sensors
fluidics, process technology, and pneumatics, as well as in the monitoring and - Different sensors immersons lengths
control of pumps and compressors. Models available with the following output types: - Fully configurable 2-channel switch, one analog output,optional
relay output
- All models: switch output open collector 14..36 Vdc, 250 mA - Protection standard IP 65
- PST-series: transmitter output; 0..10 Vdc or 4..20 mA
- PST..R-series: relay output with gold plated SPDT contact
- Pressure range from 1-600 bar Tam series Capillary Tube Thermostat
- Relative and absolute pressure TX series Thermostat
- Process connection: G 1/2" or G 3/4" flush
- Protection standaard IP65 - Mounting position is optional
- Single pole changeover
- Protection standard IP 54 to
Differential Pressure Switch DIN 40 050
- Switching temperature from
outside using a screwdriver

Flow Switch

Serial SSW Flow Serial SWL Air

Switch for Liquids Flow Switch
and Gases
Pressure Switch

Solenoid Valve

43 www.hanang-instrument.com sales@hanang-instrument.com 44
 Burner & Boiler Control Burner & Boiler Control
LG1093
UV Flame Sensor for industrial Gas Turbine
FlameSwitch BC1000 Series
LG1093AA LG1093AB LG1093AC The BC1000A/B series is a flame switch for intermittent operation to indicate presence
Mounting Interface 3/4 inch internal NPT 1.73 inch O.D. by 0.14 inch wide flange or absence of a flame and to be applied in commercial or industrial burner installations.
The BC1000A can also be used as a primary control for manually operated burner
Control Panel Teflon shielded cable with Two pin connector Two conductor
Connection one inch external conduit armored cabel. systems using a start/stop station.
thread.
Operating Temperature -40o F to 350o F
Special Certifications EMC Certification (CE Mark) None EMC Certification (CE Mark)
Directive 89/336/EEC Directive 89/336/EEC
Factory Mutual
Explosion Proof Class I.
Divisions 1 and 2
Groups B, C, and D
CENELEC approval, models
C437/C637 C6097 Gas / Air Pressure Switches
AA34/35/36 These are safety devices used in positive pressure or differential
Directive 76/117/EEC pressure system to sense gas or air pressure system.
Cable Length AA24/AA34: 16ft (4.9m) AC01/AC02: 9ft (2.7m) C6097 Standard ranges
AA25/AA35: 42ft (12.8m) AC05: 25ft (7.3m)
AA26/AA36: 61ft (18.6m) - 1-10mbar - 2.5-50 mbar - 30-150 mbar - 100-500 mbar
C437/C637 Gas air pressure switches used for pressure and
Flame Detector
differential pressure limit controls for industrial gas systems
C7027/35 C7012 C7076

L404 Pressuretrol Controllers

Provide operating control, automatic or manual reset limit protection for pressure
system up to 300 psi.
Use with steam, air, non combustible gases or other fluids non corrosive to
Combination Gas Valves pressure sensing elements.
The most extensive flames safeguard
valve offering:
Flame Switch Burner Control - Fluid power valves and actuators
- Solenoid valves
EC/RM7823 EC/RM7800 L91 Pressurerol Controllers
- Diaphragm valves
- Integrated gas valves trains Provide modulating pressure operating control for regulation of liquid or air and
other non corrosive gasses.
Use withs team, air, non combustible gasses or other fluids non corrosive to the
brass or phos-bronze (300 psi model) below.
Siphon loop included with the models for 10 to 300 psi ranges.

Gas Control
Communication
Boxes DKG 97X
Web access to burner control,
network with building or industrial Modutrol IV Motors
Modutrol IV Motors replace all present generation. Modutrol motors and set
system
Ignition Devices new, certifiable standard for industry.
- Flamenet web server These motors following features:
ZT870/ZT9XX
- Modbus Networking Module Dual Shaft
Nema 3 housing
Air to Fuel Control P7810 Electronic Boiler Higher holding torques
System Pressure Control Improve spring return holding torque
Reduced power consumption
Flame Sensors:
Photo Cells IR-Flicker
Detector UV Detectors

45 www.hanang-instrument.com sales@hanang-instrument.com 46
 Burner & Boiler Control Gas Train System
Modutrol IV Motors
Modutrol IV Motors replace all present generation. Modutrol motors and set
new, certifiable standard for industry.
These motors following features:
Dual Shaft
Nema 3 housing
Higher holding torques
Improve spring return holding torque
Reduced power consumption

VE400AA VE4000B1
AC solenoid gas valve, normally closed, Class Solenoid gas valve, normally closed, with flow rate
“A” AC powered, Safety Shutoff Solenoid Gas adjustment. Class “A” Safety Shutoff Solenoid Gas
Valve with threaded connection. For pilot and Valve with threaded connection and maximum flow rate
small burner applications in gas power burners, adjustment.
ovens, furnaces and other gas consuming For control and regulation of gaseous fluids in gas power
appliances burners, ovens, furnaces and other gas
Gas Valve Type consuming appliances
-- non regulated ON/OFF normally closed, fast Gas Valve Type
opening. -- non regulated ON/OFF normally closed, fast opening. Typical Line Diagram of Single Burrner Gas Train System
-- Media -- Media
-- Natural gas, propane, air. -- Natural gas, propane, air.

VE4000C
Solenoid gas valve, normally closed, with characterized opening, Class
“A” Safety Shutoff Solenoid Gas Valve with threaded connection and
characterized opening.
For control and regulation of gaseous fluids in gas power burners, ovens,
furnaces and other gas consuming appliances
Gas Valve Type
-- - non regulated ON/OFF normally closed, fast opening.
-- Media
-- - Natural gas, propane, air.

VE4000B3
Solenoid gas valve, normally closed, Class “A” Safety Shutoff Solenoid Gas
Valve with flanged connection. For control and regulation of gaseous fluids in
gas power burners, ovens, furnaces, and other gas consuming appliances.
Media
- Natural gas, propane, air

47 www.hanang-instrument.com sales@hanang-instrument.com 48
 Flame Monitoring Flame Monitoring
U2 Uniscan2 Typical Applications
All in One Industrial Flame Monitoring Honeywell-IRIS flame monitoring systems are perfect for industries such as petroleum and
petrochemical, power generation, pulp, paper and metals processing. Their ability to discriminate in
Honeywell’s industrial flame monitoring systems are perfect for industries such as petroleum, refineries,
the toughest environments tailors them for industrial process boilers, black liquor recovery boilers,
petrochemical, pulp, paper, power plant, metals processing and many more. The ability to discriminate in the
toughest environments, tailors them for industrial process boilers, black liquor recovery boilers, co-generation co-generation boilers, grate fired boilers, cement or lime kilns, Claus reactors (H2S), thermal oxidizers
boilers, grate fired boilers, cement or lime kiln, Claus reactorsH2S), thermal oxidizers and gas turbines. and gas turbines. Honeywell’s industrial flame monitoring systems are uniquely suited for multiple
Honeywell’s industrial flame monitoring systems uniquely suited for single or multiple burner applications, exotic burner applications, exotic fuels, hostile environments and burner types including combination, low
fuels, hostile environments and burner types including combinations, low NOx, opposed fired, hydrogen, duct NOx, tilting, opposed fired, hydrogen, duct and register.
and register. In addition, Honeywell’s flame detection systems interface with a broad range of Industrial process
burner management systems. Features : Key App licat ion Att ributes
Features : • Wide array of products to meet broad industry • Lifecycle Costs: Separate signal processor and
needs viewing head for ease of maintenance
• Triple Sensor capability, integrated and separate model available. UV • Set-Up:
• Signal processors available in AC or DC
tube for best performance sensing on gas fuel, UV Solid state sensor for >> Adjustable “Flame On” and “Flame Off”
versions
best performance in all type of fuels, and IR flicker base sensor for best • Universal AC power inputs: 85-265VAC, points for added discrimination
performance in Oil fuel and Coal. 50/60Hz >> Digital processing means you work with
• High range of UVTRON, UV Tube, and IR sensing sensitivity. • FM and CSA approved numbers – reduced field set-up time
• Plug and Play installation and set up. • Hazardous location viewing head models: >> Ability to set-up and store settings in
• Touchscreen menu and simple programming system. Class 1, Div 2, Group A, B, C, D, T5 and T4A memory for ease of replacement
• Modbus communication available. • Monitor UV and IR simultaneously or separately >> Wide gain adjustment and multiple flicker
• Explosion Proof housing Class 1 Div 2*. NEMA 4X IP66. And SIL3 • Independent configuration for each sensor frequency setting capability to prevent flame
approved. • Automatic or manual calibration out in single or multiple burner (tangential /
• Microprocessor based processing with Electronic Self Checking. • Proportional 0/4-20mA Flame Signal Output opposed) applications
• X-Rays and Gamma Rays immune. • Adjustable UV and IR gain settings for each
• Output type : Flame relay SPDT, Analog 4-20mA, Fault relay output for fault viewing head
diagnostic and backup. • Multiple high pass IR flicker frequency settings
• Electronic shutter for UV viewing head self-
Dual UV and IR Viewing Head check
Dual UV and IR sensing capabilities are housed within the CS550B detector to • Quick disconnect cable connection included
provide application flexibility. With the RP532 signal processors, the UV and IR • Viewing head temperature indication
flame components may be monitored simultaneously or separately. Additionally,
the RP532 processors allow a total of three viewing heads; two individual CS55xB Burner Management System Interface
series detectors and one CS700/CS800 detector, which may be used for pilot Each signal processor has a 0/4-20mA scalable flame signal output, two SPDT or SPST flame relays,
monitoring. A detachable programming plate on the RP531 saves and one SPDT or SPST self-check relay. The RP532 and RP531 signal processors also have a
on large installations. Processors are compatible with Modbus 24VDC auxiliary output and three N.O. alarm relays. Signal processors may also be linked to BMS
communications for remote monitoring and diagnostics. It’s the using Modbus RTU protocol for monitoring and diagnostics.
perfect solution to many difficult flame detection applications.
Remote Configuration, Monitoring, Diagnostics
Easily interface multiple signal processors through FlameTools software for remote configuration,
Individual UV and IR Viewing Head monitoring and diagnostics. Each signal processor is Modbus RTU capable with selectable parity and
Multiple housing sizes and gain settings in both baud rate settings. Link up to 31or 63 signal processors (model dependent), in a single daisy chain
UV and IR to fit your application. Perfect for loop, to FlameTools software. Refer to the applicable manual for connection method (RJ-11, RJ-45,
single and multiple burner applications and pilot 2-wire twisted pair, stereo jack).
monitoring.

49 www.hanang-instrument.com sales@hanang-instrument.com 50
 Limit Switch Limit Switch
Weather-Sealed Explosion-Proof Switch-LSX Cable Pull Safety Switch-CPS
Limit Switch-HLS Series Limit Switch-SL Series
Characteristic: Attributes: Single/dual head-rope pull
Characteristic: Characteristic:
* Sealing- applicble portions of Potential Applications: Conveyor applications
* Design small, small mounting space * Standarad asia mounting dimension
NEMA1,3,4,6,7,9 and 13 Housing: Die-cast
* Special design, easy to wire, enough wining * Save mounting space
* Tracking intercahngeability with MICRO Approvals: UL/CSA,CE
space * Rating 10A/250V
SWITCH ML-E1 and HDLS IEC/NEMA rating: IP66/67; NEMA 1,4,12,13
* SPDT No contacts * Machinery life: 1x107 ops * Variety of heads and non-sparking actuators Body Dimensions: 165.1x79.8x325.9 mm
* Rating 10A/250VAC * Variety of different actuator styles * Field adjustability matches switch to Temperature: -40ºCto85ºC [-40ºFto185ºF]
* Die-cast chassis, plastic housing * UL, CCC, CE approvals application
* standard Asia mounting dimension * Environment rating:IP64 * Momentary, maintained, random sequence,
* Long machinery and electric life or center neutral action
* Pre-form flexile cable, easy and fast wiring * 10 amps continuous carry electrical rating
* Oil tight, water tight, dust tight:IP65 * Choice of silver or gold contacts
* Variety of different actuator styles * 1/2 or 3/4 inch conduit opening
* CE, CCC approvals * UL Listed, file #E61730
* CSA Certified, file #LR57327
* Internal grounding screw
Proximity Switch AA Series
Limit Switch-GLS Series Limit Switch-SZL-VL Series
Characteristic:
Characteristic: Characteristic: * Dimension of standard M8,M12 and M30
* Designed to IEC standard for * Design small, small mounting space * Square17x17, 25x25, 40x40
world-wide applications * Special design, easy to wire, enough wining * M8 fast connection
* UL, CSA, CE approvals space
* M12 fast connection
* International conduit sizes * SPDT No contacts
* M30 fast connection
* Direct PLC interface compatible * Rating 10A/250VAC
* Oil tight, water tight, dust tight:IP67
* Die-cast chassis, plastic housing
(two circuit) * AC and DC available
* standard Asia mounting dimension
* Modular construction reduces
* Long machinery and electric life
maintenance parts costs
* Pre-form flexile cable, easy and fast wiring
* Designed for ease of installation * Oil tight, water tight, dust tight:IP65
* Variety of basic switch versions * Variety of different actuator styles
* Wide choice of actuators * UL, cUL listed, CE, CCC approved

Limit Switch-ZLA Series Limit Switch-HDLS Series Limitless Wireless Solutions

Characteristic: Characteristic:
* IEC EN 50041 standard * Characteristic:
* Long machinery and electric life * Wide variety of operating heads
* Oil tight, water tight, dust tight:IP67 * Field adjustable operating modes, for reduced
* Zinc/alumunium die-cast body inventory
* Variety of different actuator styles * Convenience of on-the-spot adjustment
* Contact block for easy change available instructions
* Variety of contacts available * Complete choice of circuitry and electrical ratin
* Galvanically isolated contacts goptions, including solid state switching
* NO contacts * Plug-in and non plug-in versions have
* Cable entry available: M20 and 1/2”NPT identical operating characteristics and are
UL, cUL listed, CE, CCC approved dimensionally interchangeable
* NEMA1, 3 ,4 ,4X, 6, 6P and 13
* UL, CSA approved
* UL listed, file #E37138
* CSA Certified, file #LR57326

51 www.hanang-instrument.com sales@hanang-instrument.com 52
 Sonar Sludge System

The ORCA Series Sonar transmits a sound pulse

through the water (liquid) towards the blanket/
interface at the bottom of the tank.
The pulse is reflected off the blanket/interface back
to the sonar transducer, which is interpreted by the
Hawk is a world leader in level, positioning and flow measurement, sonar transmitter, compensated for temperature and
providing cutting edge equipment to the global industrial market. We provides a distance reading to the blanket/interface
or height of blanket/interface from the bottom up.
have 30 years of experience and provide industry leading technology
and cost effective solutions.

The company`s built factory and head office is located in Melbourne

Australia. The facility provides for efficient production and research and Typical Applications
development activities. The company produces its own products and SEWAGE and WASTE WATER TREATMENT
has developed an efficient production process. >> Primary Sedimentation – Blanket level.
>> Secondary and final Clarifiers – RAS Blanket and
fluff/pin floc layer.
>> Thickeners and DAF – Bed level and clarity of
water.
>> Sequential Batch Reactors – Blanket monitoring
(floating sonar).
>> Lagoons – Bed sludge level.

WATER TREATMENT
>> Primary Sedimentation – Floc blanket level and Feature
clarity.
>> Thickener – Bed level and clarity of water. -- Dual independent analogue outputs to track two
>> Lamella Clarifier – Bed level and floc level. different interfaces, or clarity simultaneously, with the
one sonar sensor.
MINING / PROCESS -- Full range of sonar transducers to optimize detection of
>> Clarifiers – Bed level and clarity of liquid. heavy and light density interfaces.
>> Thickeners – Bed level and clarity of liquid. -- Calibration using DENSITY input to track specific
>> CCD’s – Bed level and clarity of liquid. density inter faces. eg: RAS blanket - 4g/l, floc/fluff layer
>> Settling Ponds/Lagoons – Bed sludge level. - 1g/l.
>> Water Treatment – Floc level and clarity. -- Control room graphics of tanks and interfaces.
>> Carbon Columns – Carbon granular level. -- Industrial scum cleaning mechanism’s, that do not
>> Circular or Rectangular, moving bridges or fixed require maintenance. No wiper blade assemblies.
bridge installation possible. -- Range to 30 metres — Option: 60 metres 2 x 4-20mA
(Isolated) analogue outputs.
-- 500 metre sonar transducer/sonar transmitter
separation.
-- Modbus, Profibus, HART Comms capability.
-- Relay alarms.
-- GSM module for remote diagnostic support,
International capability.

sales@hanang-instrument.com 54
 Level Measurement Level Switch
Sultan 234(H) Series

The SULTAN 234(H), is a non intrusive acoustic wave

transmitter with flexibility, used for measuring liquids and VS1000 Vibration Level Switch
solids, to a maximum range of 120 metres.
• Universal Supply: The piezo-electrically stimulated osciliating probe vibrates at its mechanical frequency
of resonance of 125
-- 2 Wire Loop Powered.
Hz. If the probe is covered by the bulk material. The damping thus generated is
-- 3 Wire DC.
registered electronically and a corresponding signal output is actuated. The oscillation
-- 4 Wire AC/DC.
of the device ensures that it features certain self cleaning properties.
• Universal Transducer Inputs: 50, 40, 30, 20, 15, 10, 9,
5, 4 kHz. Typical Application:
• GSM/CDMA Capability • Building Industry - Materials, moulding sand etc.
• Communications: GOSHAWK, HART, MODBUS, • Food Industry - Milk powder, flour, salt etc.
• FOUNDATION FIELDBUS, PROFIBUS & DEVICENET • Plastics Industry - Powder, granules etc
(pending) • Timber Industry, Chemical Industry, Mining etc.
• Certification: CE, ATEX, SAA, FM, CSA, (pending)
• Multiple Head Configuration: 1 to 128 Transducer Locations
AS2000 Admittance Level Switch
PRIMARY AREAS OF APPLICATION
• Mining: Surge bins, ore passes, stockpile, stackers, reclaimers, storage silos etc. The AS2000 Admittance switch monitors a change in current flow which is proportional
• Power Stations: Boiler bunkers, raw coal bunkers, fly ash silos, etc. to the admittance between the sensing probe, the product and the vessel wall. It features
• FOOD • CEMENT • PLASTICS • GRAIN • CHEMICALS excellent temperature stability and switch point repeatibility. It has the capability to neglect
• PAPER • IRRIGATION • QUARRIES conductive and non conductive product build up on the probe. PC Connectable.
Typical Application:
Sultan Smart Series • Aluminium Smelters • Flour Plants • Coal Plants • Coke Plants
• Soft Drink Plants • Fertilizer Plants • Steel Mills • Food Plants
• Water Treatment Plants • Asphalt Plants • Glass Plants • Paint Plants
The SULTAN SMART is a non intrusive acoustic wave transmitter
• Brewerys • Paper Plants • Cement Plants • Chemical Plants
with all the features and performance you expect from a SULTAN
• Power Stations • Sewage Treatment Plants • Automotive Plants
234 in an all in one package, without the costly display and keypad
parts.
CS3000 Conductivity Liquid Switch
• Flexible Supply :
The CS3000 Conductivity switch is used for level monitoring of electrically
-- 2 wire loop powered conductive liquids, muds etc in all kinds of metallic and non-metallic containers.
-- 3 wire DC In the case of a metallic tank the conductivity between the front of the probe and
• Universal Transducer options : the container wall is measured. In the case of a non metallic tank the conductivity
• 50kHz, 40kHz, 30kHz, 20kHz, 15kHz, 10kHz, 9kHz, 5kHz, 4kHz occurs between the two probes. PC Connectable.
• Communications :
• GOSHAWK, HART, MODBUS, GSM/CDMA connectable Typical Application:
• FOUNDATION FIELDBUS, PROFIBUS, DEVICE NET • Sump pump control • Chemicals • Liquids • Water Level
(pending).
• Certification : CE, ATEX, SAA, FM, CSA (pending).
RS4000 Rotation Switch - Blade type
Liquid Function
The slowly rotating measuring wing is stopped when covered by bulk material. The
• The HAWK LIQUID series emits a high powered acoustic wave reaction torque thus generated is converted into an electrical signal.
transmit pulse which is reflected from the surface of the liquid to
be measured. Typical Application:
• Building Industry - Materials, moulding sand etc. • Food Industry - Milk powder,
• The reflected signal is processed using specially developed
flour, salt etc.
software to enhance the correct signal and reject false or
• Plastics Industry - Powder, granules etc • Timber Industry, Chemical Industry,
spurious echoes. Due to the high powered emitted pulse, any
Mining etc.
losses have a far less effect than traditional ultrasonic devices.

55 www.hanang-instrument.com sales@hanang-instrument.com 56
 Flowmeter
SMALL CAPACITY OVAL GEAR FLOWMETERS

Trimec Industries is an Australian owned ISO9001:2008 quality certified

company specializing in the design and manufacture of a proprietary
range of positive displacement oval gear, impeller paddlewheel, turbine
flow meters, ancillary flow hardware and dedicated electronic flow
instrumentation. The meters measure the flow of clean liquids and are
produced in a wide variety of materials and configurations to suit most
markets including the food, chemical, cosmetic, ink, pharmaceutical,
paint, petroleum and additive industries.

The Oval gear meters are approved by the Australian National

Measurement Institute (NMI) as an instrument for resale purposes
(custody transfer). Most Trimec products have ATEX and IECEx
approvals for explosion proof areas. MICROPULSE GEAR - Small capacity
meters
GENERAL SPECIFICATIONS

The Micropulse Oval series PD flowmeters

offer a high level of accuracy turndown &
The success of Trimec is attributed to the experience and knowledge repeatability. These precision meters are
acquired over a period of 40 years by its key personnel in the flow used for flow rate measurement in flow
monitoring & control application and for
measurement industry. Trimec is committed to developing and totalizing in dispensing and batching.

expanding its range of proprietary flow products to meet the ever Micropulse gear meters are suitable for use
with a wide range of clean liquids including
changing needs of industry. viscous lubricants, chemicals, food bases &
non-conductive low viscosity solvents either
pumped or gravity fed.

FEATURES :
• High accuracy & repeatability.
• Measure low & high viscosity liquids.
• Optional electronic registers.
• Certified Exd hazardous area versions in
all sizes.
• No need for flow conditioning (straight
pipe run etc.)
• Quadrature pulse output option & bi-
directional flow.
• Specialty high pressure meters for mining
& exploration.

STANDARD OPTIONS :
High resolution output, Explosionproof, integral and remote LCD totaliser-batch totaliser, flow rate totalisers, scaled
pulse, 4~20mA & flow alarm outputs, electronic batch controllers and pulse processing modules

sales@hanang-instrument.com 58
 Flowmeter Flowmeter
LARGE CAPACITY OVAL GEAR FLOWMETERS
MEDIUM CAPACITY OVAL GEAR FLOWMETERS

MULTIPULSE GEAR - Medium capacity GENERAL SPECIFICATIONS

MAXIPULSE GEAR - Large capacity GENERAL SPECIFICATIONS
meters
meters
The Multipulse Oval series PD flowmeters
Trimec large capacity flowmeters are suited
offer a high level of accuracy turndown &
for receipt verification, loading, un-loading &
repeatability. These precision meters areused
distribution management at petroleum depots,
for flow rate measurement in flow monitoring
mine sites, marine, aviation & industrial
& control applications and for totalizing in
facilities.
dispensing and batching.
Common applications involve fuels, oils,
Multipulse gear meters are suitable for use
solvents, alcohols along with the blending of
with a wide range of clean liquids including
Bio-fuels & ethanol fuels either pumped or
additives, fuels, viscous lubricants, chemicals,
gravity fed. The meters are compact & light
food bases & non-conductive low viscosity
weight in construction, important benefits
solvents either pumped or gravity fed.
when used in mobile installations or within
FEATURES : confined spaces.
• High accuracy & repeatability.
FEATURES :
• Measure low & high viscosity liquids.
• High accuracy & repeatability.
• Optional mechanical & electronic
• Measure low & high viscosity liquids.
registers.
• Optional mechanical & electronic regiters.
• Certified Exd hazardous area versions in
• Certified Exd hazardous area versions in
all sizes.
all sizes.
• No need for flow conditioning (straight
• No need for flow conditioning (straight
pipe run etc.)
pipe run etc.)
• Quadrature pulse output option & bi-
• Quadrature pulse output option & bi-
directional flow.
directional flow.
• High pressure meters for mining &
• Optional integral check valves.
exploration.
STANDARD OPTIONS :
STANDARD OPTIONS :
Flanged process connections, Explosionproof, Mechanical registers, integral and remote LCD totaliser-batch totaliser,
Flanged and hygienic process connections, Explosionproof, integral and remote LCD totaliser-batch totaliser, flow rate
flow rate totalisers, scaled pulse, 4~20mA & flow alarm outputs, electronic batch controllers and pulse processing
totalisers, scaled pulse, 4~20mA & flow alarm outputs, electronic batch controllers and a mechanical register.
modules.

59 www.hanang-instrument.com sales@hanang-instrument.com 60
 Flowmeter Flowmeter
TURBINE FLOWMETERS DUAL PULSE PADDLE WHEEL FLOWMETERS

TURBOPULSE – small & large capacity GENERAL SPECIFICATIONS

meters DUALPULSE – insertion flowmeters GENERAL SPECIFICATIONS
TM Turbopulse mini & the larger TP Turbopulse DP490 & DP525 are cost effective stainless
turbine series measure flows of low viscosity steel flowmeters for measuring the flow of
liquids from 3 to 7,000,000 litres/hr water, fuels & other low viscosity liquids in
in a range of sizes from ¼” to 20” pipes sizes 1.5”~100” (40~2500mm).
(6mm~500mm). Insertion flowmeters are installed with the
The TM mini series have a tangential rotor metering head 1/8th into the pipe resulting in
with integral flow conditioning ports whilst very little pressure drop. They do not require
the TP series have an axial rotor and flow external power when used with the Trimec
guides, the TP series needs to be installed rate totalisers however some options such
in straight sections of pipe either horizontal as high temperature & non-magnetic models
or vertical so that the flow is conditioned. The FLOW RANGES - TM Turbopulse Mini require external power.
FLOW RANGES - TP Turbopulse
TP series have Exd & Intrinsically Safe (I.S.) Applications includ e HVAC, hot & chilled
approvals. water, fire systems, water distribution
Both meter series are robust, compact & take (management & treatment), boiler feed water
little space in the piping system. Applications & hydrant flow testing.
include fuels, alcohols, solvents, insecticides,
milk, chemicals, water & light hydraulic oils. FEATURES :
• IP68 (NEMA6) submersible 316SS
FEATURES : construction.
STANDARD OPTIONS :
• High accuracy & repeatability. • Low cost of ownership, wide flow range.
Flanged process connections,
• Low cost of ownership, wide flow range. • Rugged & compact design.
Explosionproof, integral and
• Rugged & compact design. • Intrinsically safe hazardous area versions.
remote preamplifier, LCD totaliser-
• Certified Exd & I.S. hazardous area versions. • Integral or remote pre-amplifiers & flow
batch totaliser, flow rate totalisers,
• Quadrature pulse output option. instruments.
scaled pulse, 4~20mA & flow
• Integral or remote pre-amplifiers & flow • DP525 version suitable for “hot tap”
alarm outputs, electronic batch
instruments. installation.
controllers and pulse processing
• ±0.15% custody transfer models available. • BI-Directional Flow Measurement
modules.

61 www.hanang-instrument.com sales@hanang-instrument.com 62
 Flowmeter Flow Totalizer & Batch Control
IMPELLER FLOWMETES AND PACKAGED ASSEMBLIES FLOW INSTRUMENTS

UTILITY – tangential flowmeters GENERAL SPECIFICATIONS

The UM series is specifically engineered FLOW RATE TOTALISERS – battery powered GENERAL SPECIFICATIONS
for the most common liquid transfer and Trimec offer two models, the RT12 is more orientated
monitoring applications within industrial towards the process control industry providing a range
plants, mining sites, automotive service of analog & digital outputs compatible with PLC’s & other
centers and refueling installations. plant control equipment. The new RT20 has larger digits
Monitoring & controlling the movements specifically suited for liquid transfer applications requiring
of water, fuels & other low viscosity liquids high visibility & back lighting.
under pumped or gravity conditions in small
pipe sizes is widespread. The UM flowmeter BATCH CONTROLLERS – for digital inputs
provides a cost effective & reliable solution The EB Ecobatch is fully programmable a two stage pre-
with a variety of versatile options. set batch controller with high speed counting & automatic
overrun compensation. Applications include bottle &
FEATURES : container filling, loading systems & batch mixing.
• High accuracy & repeatability.
• Low cost of ownership, wide flow BATTERY TOTALISER – low cost & compact
turndown. Providing resettable & accumulative totals on two lines of
• Rugged & compact design. display, the BT11 is also available with intrinsically safe
• Intrinsically safe hazardous area versions. approval.
• Integral flow conditioning & strainer.
PULSE PROCESSING MODULES
STANDARD OPTIONS : The PD2 is a pulse discriminator for by-directional flow
LCD totaliser-batch totaliser, flow rate totalisers, scaled pulse, 4~20mA & flow alarm outputs, packaged electronic applications, the PR2 is a pulse repeater interface for high
batch control system and pulse processing modules. loads & the PC1 minature interface board converts an NPN
solid state output to a PNP pulse output. STANDARD OPTIONS :
The above instruments are supplied in either field, pipe
PULSE TO ANALOG or panel mount configurations with some being available
The FI420 is a programmable 4~20mA frequency to current with either Aluminum or stainless steel Exd explosion
converter which fits within any Trimec flowmeter. proof housings.

63 www.hanang-instrument.com sales@hanang-instrument.com 64
 Flowmeter
CUSTODY TRANSFER

CUSTODY TRANSFER CLASS METERS

Medium & large capacity meters are supplied in the
form of custody transfer assemblies incorporating
peripheral devices to meet the requirements of industry
and relevant approval bodies.
Flowline is your best source for tank inventory monitoring,
GENERAL SPECIFICATIONS
automation and safety solutions. A recognized leader in
non-contact ultrasonic level sensors, we offer the most
reliable and cos effective solutions for the measurement and
control of chemical, waste and ultrapure liquids. Flowline
products are sold worldwide through our technical stocking
distribution network and are broadly applied in industrial,
OEM, municipal and agricultural containment applications.
MECHANICAL METERING ASSEMBLIES
Meters 1”~4” fitted with an angle adaptor will take various
combinations of large mechanical registers, presets
registers, printers & associated check & cut-off valves.

GENERAL SPECIFICATIONS

We Do Your Level Best TM

STRAINERS & AIR ELIMINATORS

The modular design of the strainers & optional air
eliminator head allow fitment as a stand alone or close
coupled strainer only or as a multi function strainer air
eliminator check valve assembly.
Wafer back pressure check valves are fitted between the
eliminator strainer (ES) and the flowmeter to aid in the
extraction of air & prevent any possibility of reverse flow.

GENERAL SPECIFICATIONS

65 www.hanang-instrument.com
 Level Transmitter Level Switch

Echotouch Two-Wire Ultrasonic

CSA approved intrinsically safe for use in
haz- ardous zones, the
non-contact level transmitter is ideal for EchoSpan
atmospheric bulk storage, day tank and waste
sump applications up to 18’ (5.4m). Compact The general purpose
and rugged, the push button calibrated two-wire ultrasonic
transmitter is reliable and easy to configure. transmitter provides
Its non-contact level measurement up to 32’
or 10m, and is ideally suited for challenging DeltaSpan
hazardous level made simple. Thermo-Flow Liquid and Gas
ultrapure, corrosive or waste liquids. Push
Range: 6” to 18’ (15cm to 5.4m) Signal button calibrated, the transmitter is broadly DeltaSpan provides contact level
output: 4-20 mA, two-wire selected for atmospheric bulk storage, day measurement of atmospheric storage The general purpose liquid or gas
Enclosure rating: IP65 tank and waste sump applications. Media tanks, wet wells or pond applications. flow switch is offered in PP or
Process mount: 2” NPT (2” G) examples include wastewater and sodium The rugged stainless steel body PVDF with a relay for PLC, SCADA
Echotouch Three-Wire Ultrasonic hydroxide. features a flexible polyurethane or alarm inter face. The flow switch
cable and sensor guard for protection is broadly suited for relatively
Echotouch provides non-contact level Range: 4” to 32.8’ (10cm to 10m) clean, non-coating media in pipe
against debris. Its pressure level made
measurement of atmospheric bulk Signal output: 4-20 mA, two-wire or ducting. The adjustable set point
simple.
storage tanks up to 24.5’ (7.4m) with an Enclosure rating: IP65 makes calibration fast and simple.
integral relay for alarm or automatic fill EchoSafe Process mount: 2” NPT (2” G)
Range: 5 psi (0.34 bar)
or empty control. Compact and rugged, 10 psi (0.69 bar) Set point: 0.04 to 3 fps (0.012 to 0.91
the push button calibrated transmitter is Flowline introduces Echosafe, an ultrasonic mps)
15 psi (1.0 bar)
reliable and easy to configure. Its level level transmiter designed for hazardous Contact type: (1) SPST relay
20 psi (1.38 bar)
measurement and control made simple. applications, where an agency certified sensor Supply voltage: 12-36 VDC
Signal output: 4-20 mA, two-wire ]
is needed. A 2-wire (loop powered) ultrasonic Process mount: 3/4” NPT (3/4” G)
Range: 6” to 24.5’ (15cm to 7.4m) Enclosure rating: IP65
level transmitter that provides non-contact level
Signal output: 4-20 mA, three-wire Cable length: 40’ (12.2m)
measurement up to 10 m (32.8’) in hazardous (classified) bulk
Enclosure rating: IP65 60’ (18.3m)
storage, day tank, waste treatment and sump applications, and is
Process mount: 2” NPT (2” G)
well suited for challenging corrosive, slurry or waste media.

67 www.hanang-instrument.com sales@hanang-instrument.com 68
 Level Switch Level Switch

Smart Trak Multi-Point Level Switch Fitting

The general purpose vertical float level switch is offered in PP or PVDF with a dry contact
closure for PLC, SCADA or alarm interface. The baffle body dampens turbulence. The level
switch is well suited for clean water and non-coating or scaling chemical solutions.

Installation: Vertical
Contact type: (1) SPDT reed
Sensor material: PP / PVDF
Process mount: 3/4” NPT (3/4” Rp)

Switch-Pak Single-Point Level Switch Fitting

The single-point Switch-Pak fitting enables users to install a Flowline level switch through
the top wall of the tank to a desired switch point. Of- fered in PVC, PP and PVDF materials,
the fitting is generally applied in bulk storage tanks and waste sumps.

Length: 6” to 10’ (15cm to 3m)

Adjustablity: None
Fitting material: PVC, PP or PVDF
Process mount: 2” NPT (2” G)

Strobe Alert Compact Flash Alarm

Offered in AC and DC powered configurations, the Strobe Alert compact flash

alarm brings immediate attention to process conditions. The NEMA 4X alarm
is compatible with our round enclosures and is actuated with our level switch,
flow switch or controller
products.

Supply voltage: 12-36 VDC / 120-240 VAC

Strobe type: Xenon tube
Enclosure rating: IP65
Enclosure material: Polycarbonate

69 www.hanang-instrument.com sales@hanang-instrument.com 70
 Display & Controller

Founded in 1974 as Planning and Engineering Agency, the

members of the systec Group offer now innovative products for the
most differentiated markets. With a staff of about 100 skilled and
qualifi ed people in the home plant at Puchheim near Munich we
develop, produce and sale sophisticated solutions for
the world market.

The systec Controls Mess- und Regeltechnik GmbH,

established 1994, has dedicated its efforts to the innovation of
process-compatible flow measuring and environmental measuring
techniques. systec Controls developed in close cooperation with
renowned universities and research centres high-tech measuring
engineering systems for all aspects of plant construction. The
uncompromising quality and unsurpassed consultancy service
account for the ever increasing market potentials of systec Controls.

Systec Controls are certified according to

DIN EN ISO 9001:2000, DIN EN 7 29-3,
AD 2000, EN 97/23/PED and complies
among others with the directives:
13. and 17. BImSchV accord. to PED
(formerly TRD), CE accord. to EMV, ATEX 100

71 www.hanang-instrument.com
 Flowmeter-Pitot Tube Flowmeter-Pitot Tube
Metering for Gas, Steam and Liquid ImproveIT – Installation without straight run requirements
The ImproveIT database was compiled based on
The deltaflow is a pitot tube which measures the flow in years of experience and thousands of individual
conduits according to the differential pressure principle. calibrations using the deltaflow in situations
It can be used to meter gases, steams, and liquids involving shortened inlet paths. Simply draw a
under almost any operating condition in many different sketch of your installation, and we will calculate
industries. the adjusted flow values for you. It really is that
simple.
In Power Plants: Here’s How It Works:
When you place your deltaflow order, you include
The deltaflow meters all gaseous media reliably and
a sketch or a drawing of your application. We will
precisely, including fresh air, preheated air, recycled
make a recommendation about the best place
stack gas, and flue gas before and after wash scrubber,
for installation, determine your adjustment factor,
as well as media with an extremely high particulate An example of a double pipe elbow on multiple levels: Most flow meters require an inlet path of
and tell you what degree of precision you can 20 to 40 D. The deltaflow can be installed after only 1 D with a very small degree of error. After
load (when used with the LSP air purging system), live
expect—all free of charge! only 7 D, the accuracy of the deltaflow enhanced with the ImproveIT database is less than 1%.
steam, medium-pressure steam, low-pres-sure steam
and feed water – all tested to PED97/23/EC with CE DF25 with LSP air purging system for combustion gas with high
deltaflowC – Mass Flowmeter for Gases High Accuracy
certification particulate content after air preheating. The deltaflowC is available in two
The deltaflowC was developed to meter air accuracy classes. The standard type
In Chemical and PetroChemical: and other non-explosive and non-corrosive offers an accuracy of 4%. deltaflowC is
The deltaflow is also a viable solution in the chemical and petrochemical industries - for metering products, gases in pipes and channels in also optionally available as calibrated
exhaust or flue gasses, or inert or aggressive media. In an endurance test, complying with the guidelines of §13 a very precise, cost effective manner. probe with a calibration certificate and
and 17 of the Federal Emission Control Ordinances (German BImSchV), lasting several months and performed deltaflowC operates according to the highly an accuracy of 2%.
in 1996 at Wacker-Chemie in Burghau-sen, Germany, the deltaflow proved its durability measuring100% steam- precise differential-pressure metering Typical applications
saturated, aggressive and polluted flue gas method. Extremely fast sensors for differential • Pressurized air
pressure, static pressure and temperature. • Building services/heating, ventilation,
In Water and Wastewater Treatment: The mass flow is metered up to 4000 times air-conditioning
per second. The microcontroller processes • Combustion air regulation
The deltaflow is especially valuable for metering biogas and sewer gas in the water and wastewater treatment
the values of a mass flow and outputs the • Monitoring of process air
industry. The deltaflow proves its reliability metering air flow in aeration tanks.
mass flow signal, as well as the pressure and • Pneumatics
temperature signal. • Exhaust gas metering
deltaflow is Economical, Precise, and Versatile • Compressors
• Extraction units
deltafit – Air Flow Regulation Unit
• Exhaust gas volume metering
• Minimal Pressure Loss Results in Minimal Energy Costs.
• Save Up To 90% in Installation Times and Costs. Accurate air flow
• Highest metering precision thanks to optimized probe profile and high regulation for aeration
precision manufacturing. tasks in wastewater
• Patented probe profile. treatment plants
• Result: The resistance coefficient remains constant throughout the entire
measuring range. Flow rate at the edge of the deltaflow is
The accurate regulation of the
• No Measuring Errors Caused by Welded Seams at Probe’s Cross Section. accelerated to approximately 2.3times
the previous speed air flow for aeration basins
• Production Tolerance of <0.025 mm Through New Manufacturing
ensures best process quality
Processes. The deltaflow‘s pecision performance
and also helps save money as
• Absence of Capillaries Prevents Measurement Errors Caused by has been confirmed by the Technical
energy-intensive compressed
Water Columns. University at Erlangen: “Based on the
air is applied to the basin at an
• Tested by the TÜV (German Technical Inspection Authority) for calibration results, it can be stated
optimized rate.
Compliance with the § 13 and § 17 of the Federal Emission Control that the deltaflow pitot tube causes
Ordinance. less pressure and energy loss in Insufficient oxygen supply results in incomplete decomposition of harmful substances and thus insufficient
• High Pressures and Temperatures. conduits and enables more precise leaning performance. In the worst case, statutory limit values might be exceeded. Excessive aeration on the
• Integrated Pressure and Temperature Sensors. measurements than the orifices other and does not improve treatment performance but results in higher energy costs for air compression,
• Low Maintenance. previously used in conduits.” thus reducing the cost efficiency of your plant. The deltafit guarantees aeration at the required level and
(Dr. F. Durst, Professor) helps save energy costs.

73 www.hanang-instrument.com sales@hanang-instrument.com 74
 Flowmeter-Ultrasonic Flowmeter-Ultrasonic
deltaflow pitot – Portable Pitot Tube Measurement deltawaveC-F – Fixed Clamp-on Ultrasonic Flowmeter

The handheld manometer, up to six 1m-long extension sections, the

Overview
documentation, and all accessories are housed in a sturdy carrying case.
• Operating temperature: -40 to 150 °C
An Excel file is provided with the deltaflow pitot to assist in automating the
• Pipe Size: DN10 – DN6000
sampling analysis per DIN 2640 standards.
• Pipe Material: Most common
materials (ultrasonic conductible) like
The handheld manometer is battery-powered, displays the differential
steel, plastics (PE, PVC, PEEK,…)
pressure in all popular units, and comes standard with calibration instructions.
• Flow velocities: 0….+/-30 m/s
• Media: Liquids
flowcom – Flow Computer for Gases or Energy
• Accuracy: Up to 1%
The flowcom is available in two versions: a gas-compensation computer • Certificates: CE / ATEX (in
and an heat-transfer computer. flowcom is manufactured in Germany preparation)
and and has been tested for suitability by Germany’s TÜV and UAL- • Heat quantity measurement
certified under Germany’s “TA-Luft“ air-quality regulations and 13th and • 5-point calibration (Systec certificate)
17th Federal Emission-Control Ordinances.
What flowcom does
flowcom compensates for flowmeter errors due to pressure or temperature variations and computes mass or
deltawave – flow measurement, flow profile determination,
normalized volume flow rates for gases or steam. It also computes heat-transfer rates, thermal-energy contents, turbidity measurement in fluids
and thermal balances between supply and return lines for saturated steam, superheated steam, water, heat-
transfer media, or refrigerants. deltawave is the first ultrasonic multimeter that can acquire, apart from the flow, the flow profile and turbidity
or solid load, as well as the mean medium temperature and changes in the medium composition. deltawave
flowcom employs the GERG8 8 - equation in handling computations for natural gas. This equation was measures everywhere: in filled pipes, in partially filled pipes, open canals, channels and rivers. With a
developed for billing purposes, and is accepted by all major European natural - gas utilities, such as Ruhr - deltawave measurement transducer, you can realize up to eight different measurement points.
Gas (Germany), British Gas (Great Britain), Distrigaz (Belgium), Gas de France (France), N. V. Nederlandse
Gasunie (The Netherlands), S.N.A.M. S.p.A. (Italy), and the PTB(Germany). GERG88 is much more accurate
than the AGA - NX19.

deltawaveC-P – Portable Clamp-on Ultrasonic Flowmeter

deltawaveC-P is a portable, clamp-on flowmeter for measuring
liquids in filled pipes. deltawaveC-P operates according to the
proven and high-precision ultrasonic transit time method. Thanks
to the use of state-of-the-art digital signal processors and analysis
technologies, deltawaveC-P is an extremely precise and robust
measuring device.

deltawaveC-P comes in a robust practical carrying case complete with flow

transmitter, ultrasonic transducers, installation material, signal cable and
coupling grease, SD memory card and power supply.

75 www.hanang-instrument.com sales@hanang-instrument.com 76
 Infra Red Thermometry
Standard Features of Gold Series
Single Wavelength Sensors M-class
-- Temperature limits: - 40˚ to 450˚ F /
-40˚ to 2500˚ C
-- Line of Sight, Visual Aiming, and
Fiber Optic Aim Light alignment Gold 20 Class C-class
options Line-of-sight or Integrated U-class
-- A complete range of precisely Laser Aiming Alignment
selected short, long and specialty
Standard Features of Silver Series Line of
Williamson Corporation is passionate about the design, wavelengths 4-20mA and voltage
sensor outputs which may be Sight Single Wavelength Sensors
manufacture and world-wide distribution and after-sale programmed with a choice of up to 5 -- 1% or +/-1°C accuracy from -40 to 1832°F (-40 to
support of exceptionally accurate infrared thermometers for different measured parameters 1000°C)
-- Bi-directional RS232 -- A choice of D/2, D/15, D/30 and Close Focus
industrial applications - especially those involving low or variable andRS485 optics
emissivity, optical obstruction or interference, communications -- 8-14μm wavelength
-- Built-in human interface Gold 30 Class -- Line of sight alignment with optional external laser
misalignment, hostile operating conditions or other with intuitive text based Fiber Optic with Optional aiming
menu for sensor adjustment Integrated Aim Light -- 2-wire or 4 wire configurations
application challenge where our unique technical -- Stand alone sensors feature -- 4-20mA and voltage outputs which are linear with
capabilities provide significant safety, product quality or a menu selectable alarm relay or temperature
analog input for remote emissivity and alarm -- J, K or T Thermocouple outputs
productivity benefits. set point adjustments -- USB 2.0 interface
-- Optional remote interface module with a built-in AC power -- OPC server capabilities
supply and a wide selection of output and alarm options -- Internal sensor and process ambient temperature
Williamson specializes in short-wavelength -- NEMA 4X sensor enclosure, optional output
-- NEMA 7 and ATEX enclosures available -- 3ft/1m electrical cable with optional extended
single-wavelength sensors, dual-wavelength sensors,
lengths
multi-wavelength sensors, fiber-optic sensors and Pro 80/100 Class -- Emissivity settings are offered as fixed or
Line-of-sight or Integrated adjustable
application-specific sensors, with innovative and unique Laser Aiming Alignment -- Stainless steel NEMA4X (IP65)
capabilities in each category of infrared thermometer. Innovative -- Optional accessories such as mounting brackets,
watercooling, and air purge
and unique Williamson capabilities generally pertain to thoughtful
Standard Features of Pro Series
wavelength selection, proprietary single-, dual-, multi-wavelength Standard Features of PRO Series Dual Wavelength Sensors
Multi Wavelength Sensors
and fiber-optic technologies and innovative mechanical design. -- Temperature Limits: 200 - 4500˚F / 95 -
-- Temperature Limits: 200 - 4500˚F / 95 - 2500˚ C
2500˚ C -- Line of sight, visual aiming, laser aiming
-- Line of sight, visual aiming, laser aiming and fiber optic aim light alignment
and fiber optic aim light alignment options options
-- A selection of narrow band wavelengths -- A selection of narrow band wavelengths
for precise measurement on demandiing Pro 90/200 Class
for precise measurement on demandiing Fiber Optic with Optional
applications applications Integrated Aim Light
-- Use as Stand-Alone transmitter or -- Use as Stand-Alone transmitter or
connected to a panel meter, recorder, connected to a panel meter, recorder,
PID Controller or PLC PID Controller or PLC
-- Programmable 4-20mA and voltage -- Programmable 4-20mA and voltage
outputs, as well as RS232 and RS485 outputs, as well as RS232 and RS485
communications communications
-- Built-in human interface with intuitive -- Built-in human interface with intuitive
text based menu for sensor adjustments text based menu for sensor adjustments
Rugged NEMA4X (IP65), NEMA7 and -- Rugged NEMA4X (IP65), NEMA7 and
CENELEC enclosures CENELEC enclosures

sales@hanang-instrument.com 78
 Gas Analyzer

Analytical Industries Inc., doing business in the industrial

marketplace under the trade name Advanced Instruments Inc.,
have earned a reputation around the world for innovative
solutions to gas alysis that encompasses the design and
manufacture of advanced oxygen sensors and analyzer
platforms, a passion for reliable quality and superior customer
support. As a result, Analytical Industries Inc. has become
a leading worlwide supplier of oxygen sensors (view all sensors)
and oxygen analyzers to the industrial process control, natural
gas, medical and diving industries.

In November 2010, Analytical Industries entered into a formal

agreement with Underwriters Laboratories (UL) to have the ATEX
certified products evaluated to CSA and UL standards for the
purpose of obtaining a (cUL) certification for North America.

sales@hanang-instrument.com 80
 Signal Isolator & Transmitter
ITX Plus TWI-2
Universal, Loop Pwered, Loop Powered Isolator
Isolated Signal transmitter
Features
Features • Output Loop Powered
• Configurable input to most • Single and Dual channel versions
process signals • Current or Voltage inputs
• 10-40Vdc loop powered • Independent Zero and Span controls
supply for each channel
• 600 ohms output drive capability at
In line with the Weidmuller vision and its dedication to the process • Simple free PC software
24Vdc
• Slim 12.5mm housing
industry, a new comprehensive range of process instruments have • No internal adjustments needed
• Dual DIN rail mount housing
been introduce which includes Signal Isolators, Signal • Plug-in, screw type, terminal blocks
Transmitters, Indicators and Calibrators specifically developed
and designed to meet the sometimes arduous and complex needs DFI
Dual Channel Signal Booster/Splitter/Isolator
of modern process automation applications.

Key to the product range is its flexibility through its

“on site user” configuration capabilities to almost any output
range and measurement unit used in process automation
applications. Robust construction is also a major consideration
in these applications and the Weidmuller process instrument
range has this covered.

PTX 800A & PTX 800D

8 Digit Rate Totalizer with Alarms mA Calibrator Calibrator
Portacal 275 Portacal 1000

PMX 420 Series

4 digit LED Display with Alarms

sales@hanang-instrument.com 82
 Liquid Analyzer
S8000 Series pH/ORP Electrode
The Next Generation Self Cleaning Flat
Surface pH/ORP Electrode
• Resist Coating
• Resist Abrasion
• Modular Plug and Play
• Configurable
• Enhanced ERP Reference System
• PPS Construction S270 Series pH / ORP
• More than 1 million units sold worldwide

TX100 pH/mV Loop-Powered Transmitter Meter

PH1 –IPOD / IPHONE / IPAD pH
•
Voltage isolated (500 V) 4-20 mA
Output
• Non-volatile memory retains all
stored configurations and calibration
data
• Output Current Indicator for Out-of-
Range and Hold Conditions prevents
discrepant reading
• Large segmented display indicates pH or mV and Temperature
• Measures pH with accuracy to .01 pH simultaneously
• Displays both ambient and solution • Flashing screen icon indicate mode of operation
temperature • Programmable Probe Clean reminder flashes when it is time to
• Supports 1, 2, 3 or more calibration clean probe (programmable from 1 to 250 days)
points
• Records measurements with
timestamp and geographic TX-3000 pH/mV Transmitter
coordinates • Voltage isolated (500 V) 4-20 mA
• Vies data history by date or location Output for pH or ORP
• Sends readings by e-mail (induvidual • Voltage isolated (500 V) 4-20 mA
The Sensorex facility is located in Garden Grove, California. or .csv file) Output for Temperature
It has more than 2,050 m2 and incorporates the latest • 2 adjustable Hi/Lo relay contacts
inovations in electrode manufacturing technology. OEM’s • Large segmented display
indicates pH or mV and
around the world depend on Sensorex to provide premium Temperature simultaneously
TCSTX - Menu Driven Loop Powered
quality and dependable sensing technology. Toroidal Conductivity Transmitter
• NEMA 4x, IP65 enclosure
• Programmable was feature
with 4 - 20 mA Isolated Output and
TCS3000 and 3020 Series
Sensorex areas or expertise include pH, ORP ( Redox ), Local Display
Toroidal Conductivity Sensors
Conductivity ( contacting and inductive ), galvanic Dissolved • 2 each Voltage Isolated (500 V)
• Resists coating, corrosion
4 - 20 mA Outputs (Conductivity
Oxygen, Free Chlorine, Chlorine Dioxide and other analytical or Resistivity or Salinity and and fouling
sensors. Sensorex ships over 250,000 sensors per year Temperature) • Durable Noryl construction
• 2 Adjustable Hi/Lo Relay/Contacts • Easy installation
worldwide. • Large segmented display indicates • Optional PEEK version
Conductivity or Resistivity or Salinity available soon
and Temperature simultaneously • Connects to Sensorex
• NEMA 4X, IP65 enclosure TCSMA, Rosemount or
• Programmable wash feature Foxboro Instrumentation

sales@hanang-instrument.com 84
 Liquid Analyzer Engineering Capability

E
Conductivity/Resistivity Sensors CT1000-Pt Loop-Powered Blind very time you purchase from PT. Hanang Gema Instrument, the relationship has
with Sanitary Flange Mounting Contacting Conductivity Transmitter just begun. The ongoing partnership continues throughout. PT. Hanang Gema
• All 316 stainless steel constructions • Competitively price
Instrument has a well trained service organization consisting of competent engineers
• Available with automatic • Easy-to-use & and special educated technicians that handle repairs, field service, installation,
temperature compensation Compact Size commissioning, and training in Process Control & Instrumentation.
• Cell constant values of 0.01, 0.1 • 4 - 20 mA loop-
and 1.0 powered
• 1”-1.5” and 2” Tri clamp flanges • Adjustable zero and 1. Installation
available span Our engineering team will install your
• Sensors are steam sterilizable • Fully encapsulated instruments and/or process control
CON3000 Conductivity/Resistivity/ system, ensuring it is fully operational,
Salinity Transmitter GUARANTEED.
• 2 each Voltage Isolated CON500 Loop-Powered Contacting
(500 V) 4 - 20 mA Conductivity Transmitter 2. Commissioning
Outputs (Conductivity • Six selectable conductivity ranges for a
Correct commissioning of devices in
or Resistivity or Salinity wide range of measurements applications is critical to optimize the plant
and Temperature) • Isolated Output prevents output performance. Units will run without problem
• 2 Adjustable Hi/Lo interference caused by electrical noise
Relay/Contacts
from the first day and may be covered by
or leakage from the input source
an application guarantee if the device is
• Out-of-range Output Current Indicator
• Large segmented display indicates specified, installed and commissioned in a proper way.
indicates an out-of-range measurement
Conductivity or Resistivity or Salinity and
by emitting a 3.8 mA output current
Temperature simultaneously
• NEMA 4X, IP65 enclosure
• Hold Output Current Indicator to Indicate ‘HOLD’ mide during 3. Training
calibration or set up mode.
• Programmable wash feature Training can be performed in-house or on-site. You will learn how to operate and
• Scaleable 4 - 20 mA Current Output
• Primary and secondary display for simultaneous displayt of maintain your equipment efficiently and effectively and also discover methods for
CLD402 AND CLD410 Chlorine Dioxida Conductivity and Temperature values preventative and corrective planned maintenance.
Transmitter • Easy Push Button Operation
FCL402, FCL405, and FCL 410 Free 4. Field Service / Repair Service
Chlorine Transmitter Processed Dissolved Oxygen We offer onsite service, repair service. With our strong engineering capability,
The CLD series chlorine dioxide sensors Sensor/ Transmitter we will try our best to provide excellent customer satisfaction, and be your expert
and FCL series free chlorine sensors
feature amperometric measurement
partner in process control & instrumentation.
technology. Designed for use in water
treatment disinfection applications and
for use with chlorine dioxide or chlorine
generators, pools, etc, these sensors
are available in several ranges for
detecting ppm levels of chlorine dioxide

Free of charge !
or free chlorine. Choose tge CLD402
for 0-2 ppm and CLD410 for 0-10ppm For Aquaculture and Wastewater,
of chlorine dioxide. Choose the FCL402 our process dissolved oxigen
for 0-2 ppm, FCL405 for 0-5 ppm and
to get a copy
probe are designed for a long
FCL410 for 0-10 ppm of free chlorine.
term deployment. They feature

please call or email us

• 4 - 20 mA Direct Output reliable and fast responding
• 500V Input to Output Isolation galvanic technology with mV or
• Multiple Ranges to Select From 2 - 40 m outputs.
• Replacement for other 4-20 mA Phone : (+62-21) 532 4665 / 536 2813/ 5365 1464
ClO2 and Free Cl- Sensors E-mail : sales@hanang-instrument.com

85 www.hanang-instrument.com sales@hanang-instrument. 86
 PT. HANANG GEMA INSTRUMENT
Plaza Kebon Jeruk Block D-5, Jl. Raya Perjuangan Kav.35, Jakarta 11530
Ph. (62-21) 532 4665 / 536 2813 / 5365 1464, Fax (62-21) 530 6276, E-mail : sales@hanang-instrument.com

w w w .h a n a ng - i n st r u m en t . c om