Technical Data Sheet
• Long Oil Life
• Extra Protection
Shell Tellus S2 MX 32 •
•
Maintain System Efficiency
Industrial Applications
High Performance Hydraulic Fluid, Group II Base Oil Technology, Industrial Applications
Shell Tellus S2 MX fluids are high performance hydraulic fluids based on Group II base oils that provide
outstanding protection and performance in most manufacturing and many mobile equipment operations. They
resist breakdown under heat or mechanical stress and help prevent damaging deposit formation that can
decrease the efficiency of your hydraulic power system.
Performance, Features & Benefits Shell Tellus S2 MX fluids are formulated for exceptional
· Long fluid life – maintenance saving foam control and excellent air release to facilitate efficient
hydraulic power transfer and minimise fluid and equipment
Shell Tellus S2 MX fluids help extend equipment
impacts of cavitation induced oxidation that can shorten fluid
maintenance intervals by resisting thermal and chemical
life.
breakdown. This minimizes any harmful sludge formation
and provides better reliability and system cleanliness. Main Applications
Shell Tellus S2 MX fluids also have good stability in the
presence of moisture, which ensures long fluid life and
reduces the risk of corrosion and rusting, particularly in
moist or humid environments.
· Industrial hydraulic systems
· Outstanding wear protection Shell Tellus S2 MX fluids are suitable for a wide range of
hydraulic power applications found in manufacturing and
Tellus S2 MX is designed to meet the demands of hydraulic
systems well in to the future, including new specifications industrial environments.
such as Bosch Rexroth Fluid Rating RDE 90245 and
enhanced extreme pressure performance in the FZG test
· Mobile hydraulic fluid power transmission systems
Shell Tellus S2 MX fluids can be used effectively in mobile
(FLS 11 at ISO VG 32). It also demonstrates excellent hydraulic power applications such as excavators and cranes,
performance in the tough Denison T6H20C (dry and wet except where significant ambient temperature variations are
versions) and the demanding Eaton Vickers 35VQ25. Shell encountered. For these applications we recommend Shell
Tellus S2 MX fluids can help system components last Tellus S2 VX.
longer.
· Marine hydraulic systems
· Maintaining system efficiency Suitable for marine applications where ISO HM category
hydraulic fluids are recommended.
Excellent filterability and high performance water
separation, air release and antifoam characteristics all help
contribute to maintaining or enhancing the efficiency of
hydraulic systems. Optimization of friction characteristics
also helps reduce harmful stick-slip effects.
An oil cleanliness particle count of ISO 4406 20/18/15 or
better (measured at the point of filling) helps reduce the
impact of contaminants on filter blocking, allowing both
extended filter life and enhancing equipment protection.
Page 1 of 3 Tellus S2 MX 32 (2016), v 4.1 05.07.2016.09.57
Specifications, Approvals & Recommendations Compatibility & Miscibility
Product is designed to meet : · Compatibility
· Bosch Rexroth Fluid Rating RDE 90245 Shell Tellus S2 MX fluids are suitable for use with most
· Parker Denison (HF-0, HF-1, HF-2) hydraulic pumps.
· Eaton E-FDGN-TB002-E · Fluid Compatibility
· Fives (Cincinnati Machine) P-68
Shell Tellus S2 MX fluids are compatible with most other
· ISO 11158 (HM fluids)
mineral oil based hydraulic fluids. However, mineral oil
·
hydraulic fluids should not be mixed with other fluid types
DIN 51524 Part 2 HLP type (e.g. environmentally acceptable or fire resistant fluids).
· ASTM D6158-05 (HM fluids)
· Seal & Paint Compatibility
· Swedish Standard SS 15 54 34 AM Shell Tellus S2 MX fluids are compatible with seal materials
and paints normally specified for use with mineral oils.
For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.
Typical Physical Characteristics
Properties Method Shell Tellus S2 MX 32
ISO Fluid Type HM
Kinematic Viscosity @00C cSt ASTM D445 340
Kinematic Viscosity @400C cSt ASTM D445 32
Kinematic Viscosity @1000C cSt ASTM D445 5.4
Viscosity Index ISO 2909 105
Density @150C kg/l ISO 12185 0.854
Flash Point (COC) 0
C ISO 2592 220
Pour Point 0
C ISO 3016 -30
Colour ASTM D1500 L0.5
Water Separation minutes ASTM D1401 20
TOST life hours minimum ASTM D943 5000
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
· Health and Safety
Shell Tellus S2 MX hydraulic fluid is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from
http://www.epc.shell.com/
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 3 Tellus S2 MX 32 (2016), v 4.1 05.07.2016.09.57
Page 3 of 3 Tellus S2 MX 32 (2016), v 4.1 05.07.2016.09.57
