0% found this document useful (0 votes)
286 views1 page

TCV 101

This document provides specifications for a 0.5 inch control valve with a Fisher 24000C trim. It will be used to control the temperature of water vapor with a service range of 0.01 to 0.038 kg/s at 100 psig and 170 degrees C inlet conditions. The valve will have a spring-return pneumatic actuator calibrated for a 3-15 psi control signal and positioner. It meets ANSI Class I leak-tight requirements and will be hydrostatically tested to 100 psig.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
286 views1 page

TCV 101

This document provides specifications for a 0.5 inch control valve with a Fisher 24000C trim. It will be used to control the temperature of water vapor with a service range of 0.01 to 0.038 kg/s at 100 psig and 170 degrees C inlet conditions. The valve will have a spring-return pneumatic actuator calibrated for a 3-15 psi control signal and positioner. It meets ANSI Class I leak-tight requirements and will be hydrostatically tested to 100 psig.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Control Valve Specification Sheet

Customer: cetilpalm
Fax: 25555 Phone:
Contact: Contact:
Item: 1 Qty: 1 PO Number:
Tags: TCV-101 Project: Valvulas de Control
Description: .5 Inch 24000C-3582 P&ID Number: 100
Service Description: Control de temperatura Line Number:
1 Fluid: WATER VAPOR Crit. Pressure PC:
Service Conditions Units Minimum Normal Maximum Others
2 Mass Flow Rate Gas (w) kg/s 0.0100000 0.0190000 0.0380000 0.0190000
3 Inlet Pressure (P1) psig 100.000 100.000 100.000 100.000
4 Pressure Differential (dP) psi 30.000 25.000 20.000 25.000
5 Inlet Temperature (T1) deg C 170.0000 170.0000 170.0000 170.0000
6 Inlet Density (Rho1) kg/m3 3.56 3.56 3.56 3.56
7 Ratio of Specific Heats (gamma) 1.330 1.330 1.330 1.330
8
9 Sizing Coefficient (Cv) 0.567 1.157 2.624 1.157
10 % Open 21 45 80
11 (Allowed) / (Calculated w/ Insulation dB(A) /30 /30 /30 /30
Credit)
12
PIPE LINE 53 Actuator Type: Spring & Diaphragm
13 Size, Schedule In: 1 Inches,40 54 Mfg/Model: Fisher
14 Size, Schedule Out: 1 Inches,40 55 Size: Eff Area:
15 Insulation: 56 On/Off: Modulating:
16 Valve Body/Bonnet: Type: Globe 57 Spring Action: Close
17 Size: NPS 1/2 ANSI: CL150 58 Max Allow Press:
18 Max Press/Temp: 100psig/200deg C 59 Min Reqd Press:
19 Mfg/Model: Fisher/24000C 60 Available Air Supply Pressure
20 Body/Bonnet Matl: WCC Steel 61 Max: Min:
21 Liner Matl/ID: 62 Bench Range:
22 End Connection In: .5 Inch CL150 63 Act Orientation: Vertical
23 End Connection Out: .5 Inch CL150 64 Handwheel Type: Top Mounted
24 Flg Face Finish: 65 Air Failure Valve: Set at:
25 End Ext/Matl: 66
26 Flow Direction: Up 67 Input Signal: 3-15 psi
27 Bonnet Type: Plain 68 Positioner Type: Pneumatic
28 Lub-ISO Valve: 69 Mfg/Model: Fisher/3582
29 Packing Material: PTFE Enviro-Seal 70 Incr Signal Output: Direct
30 Packing Type: Enviro-Seal 71 Gauges: No By-Pass:
31 72 Cam Characteristic: Linear
32 TRIM Type: 73
33 Size: 0.8125 Inch Travel: 0.50 Inch SWITCHES
34 Characteristic: Linear 74 Type: Qty:
35 Balanced/Unbalanced: Unbalanced 75 Mfg/Model: Fisher
36 Rated Cv: 4 Fl: 0.9 Xt: 0.68 76 Contacts/Rating:
37 Material: 77 Actuation Points:
38 Seat Material: 78
39 Cage Material: AIRSET
40 Stem Material: 79 Mfg/Model: Fisher
41 80 Set Pressure:
42 81 Filter: Gauges:
SPECIAL ACCESS: 82
43 NEC Class: Group: Div: 83 TESTS Hydro Press:
44 ASCO Model 55102025 2 Way SOV Energize To Vent - 84 ANSI/FCI Leak Class: ANSI CL I
Actuator
45 With Bug Vent 85 Shutoff Pressure: 100.000 psig
46 Fisher i/p,model i2P-100, 86
47 Rev Date Revision Orig Checked App
48
49
50
51
52

You might also like