PowerKit Engine 6M11 Series
General Specifications
Bore x Stroke 105 x 130 mm
Displacement 6.75 L
N° of Cylinders 6
Cylinders Arrangement In line
Fuel System Mechanical Pump
Governor (Gov.) Electronic
Aspiration (Asp.) T/A-A
Diesel Engine Gross Engine Output Typical Generator Output
Prime Standby Prime Standby
Speed Asp. Gov.
Model Power PRP Power ESP Power (PRP) Power (ESP)
Rpm
kWm kWm kWe kVA kWe kVA
6M11G150/5 1500 128 140 108 135 120 150 T/A-A Elec¹
6M11G165/5 1500 138 152 120 150 132 165 T/A-A Elec¹
6M11G110/6 1800 120 132 100 125 110 138 T/A-A Elec¹
6M11G135/6 1800 144 158 120 150 135 170 T/A-A Elec¹
6M11G160/6 1800 164 180 145 181 160 200 T/A-A Elec
6M11G176/6^ 1800 182 200 160 200 176 220 T/A-A Elec¹
DPK-TSH-EN-6M11-0006-19-02-01 Moteurs Baudouin reserve the right to modify these specifications, without notice. Document not contractual.
Aspiration : T/A-A = Turbocharged & Air-to-Air Aftercooled
¹ : Mechanical governor available as option
^ These engines are designed for emergency standby power (ESP) applications only. The indicated PRP Power is
for reference only.
Standard Equipment
Engine and block Fuel system
Cast iron gantry type structure block P type fuel injection pump and injector for higher inject
One-piece forged crankshaft pressure
Separate cast iron cylinder heads and wet liners Duplex fine filter for better efficiency
Aluminum alloy pistons with oil cooling gallery Air intake and exhaust system
Cooling system Mid-position and below inlet turbocharger optimized for
Radiator and hoses supplied directly mounted on the genset application
engine Special rear mounted air filter with restriction indicator
Thermostatically-controlled system with belt driven Exhaust manifold shield for heat isolating
coolant pump and pusher fan Electrical system
Lubrication system 12 Vdc electric starter motor and battery charging
Flat bottom large capacity oil pan alternator for 1500 Rpm engines
Spin-on full-flow lube oil filter 24 Vdc electric starter motor and battery charging
alternator for 1800 Rpm engines
LOP + HWT sensors
Flywheel and housing
SAE 3 flywheel housing and 11.5” flywheel for 1500 Rpm
SAE 1 flywheel housing and 14” flywheel for 1800 Rpm
Société Internationale des Moteurs Baudouin POWER YOUR SUCCESS
Technoparc du Brégadan - 13260 Cassis - France - Tél. +33 488 688 500 - Baudouin.com
PowerKit Engine 6M11 Series
Dimensions and Weight
Diesel Engine Dimensions and dry weights including radiator
Speed L W H Weight
Model
Rpm mm mm mm Kg.
6M11G150/5 1500 1726 856 1146 710
6M11G165/5 1500 1726 856 1146 710
6M11G110/6 1800 1726 856 1146 710
DPK-TSH-EN-6M11-0006-19-02-01 Moteurs Baudouin reserve the right to modify these specifications, without notice. Document not contractual.
6M11G135/6 1800 1726 856 1146 710
6M11G160/6 1800 1726 856 1146 710
6M11G176/6 1800 1726 856 1146 710
Ratings definitions
Emergency Standby Power (ESP) Unlimited Prime Rated Power (PRP)
Emergency Standby Power is the maximum power Prime Power is the maximum power available for
available for a varying load for the duration of a main unlimited hours of usage in a variable load application.
power network failure. The average load factor over 24 The average load factor should not exceed 70% of the
hours of operation should not exceed 70% of the engine’s engine’s PRP power rating during any 24 hour period.
ESP power rating. Typical operational hours of the engine An overload capability of 10% is available, however,
is 200 hours per year, with a maximum usage of 500 this is limited to 1 hour within every 12 hour period.
hours per year. This includes an annual maximum of 25
Continuous Power (COP)
hours per year at the ESP power rating. No overload
capability is allowed. The engine is not to be used for Continuous Power is the maximum power available for
sustained utility paralleling applications. an unlimited period of use at a constant load factor. No
overload capability is allowed.
1) All ratings are based on operating conditions under ISO 8528-1, ISO 3046, DIN6271. Performance tolerance of ±5%.
2) Test conditions : 100 kPa, 25°C air inlet temperature, relative humidity of 30%, with fuel density 0.84 kg/L. Derating may be
required for conditions outside these; please contact the factory for details.
3) Power output curves are based on the engine operating with fuel system, water pump and lubricating oil pump; not included are
battery charging alternator, fan and optional equipment.
Société Internationale des Moteurs Baudouin POWER YOUR SUCCESS
Technoparc du Brégadan - 13260 Cassis - France - Tél. +33 488 688 500 - Baudouin.com
