Product Data Sheet

Edition 01. 2014

Identification no. xxx
®
Sika FillerBoard-50 PE (Provisional)

Sika FillerBoard-50 PE
®

Closed Cell Polyethylene Fillerboard

®
Product Sika FillerBoard-50 PE is a closed cell, crossed linked, non-absorbent
Construction

Description polyethylene expansion joint filler board for use in expansion and isolation joints in
concrete and masonr y structures. Jointflex is UV resistant, has excellent
weatherability, is non-absorbent and has excellent properties allowing it to be used
in water retaining and excluding structures where, potable, salt, chlorine and
sewerage water is prevalent.
Advantages  Non-absorbent
 Lightweight
 Excellent weatherability
 Resistant to ultraviolet light
 No bitumen content
 Ability to compress and recover
 Non extruding from joint movement
 Suitable for submerged or trafficable joints
Areas of Application  Slab on ground
 Brickwork and blockwork
 Reinforced concrete structures
 Concrete roads & pavements
 Suspended slabs
 Basements and tunnels
 Water retaining and excluding structures
 Dams & reservoirs
®
Available Sizes Sika FillerBoard-50 PE is available in sheet size 2m x 1m.
®
Sika FillerBoard-50 PE is available in thickneses of 10, 12, 15, 20 and 30 mm.
Sizes from 2-50 mm are cut to order.
® 3
Sika FillerBoard-50 PE is available in low density (50kg/m ), medium density
3
(100kg/m3) and in high density (150kg/m ).

1 Sika® FillerBoard-50 PE 1/3

Physical Properties
Density 50 kg/m³
(ISO 845)
Tensile Strength 0.44 MPa
(ISO 1798)
Elongation at Break 100%
(ISO 1798)
Compression stress
strain at deflection
10%
34 KPa ISO 3386
25%
59 Kpa ISO 3386
50%
125 Kpa ISO 3386
Tear Strength 1.0 N/nm DIN 53507
Compressive Set
(22n, 25%, 25ºC) after
compression release :
0.5h
<14% ISO 1856
24h
<6% ISO 1856
Water Absorption after <3 Vol% DIN 53433
28 days

Typical Application
STANDARD DETAILS OF WALL APPLICATIONS

2 Sika® FillerBoard-50 PE 2/3

 STANDARD DETAILS OF GROUND SLAB APPLICATIONS

Construction

®
Installation Procedures Sika FillerBoard-50 PE is cut to size in sheet form with a sharp retractable blade.
Sheets and rolls are adhered to the first concrete structure by a contact adhesive.
Adhesive is applied directly to the sheet in 50mm diameter ‘spots’ @ 300mm
centers (approximately) or as required. Also refer to our installation method,
available upon request.

Health and Safety For further information or advice on health and safety precautions, safe handling,
storage and correct disposal of products, please refer to the most recent product
Information Material Safety Data Sheet (MSDS), which is available upon request.

Legal Notes The information, and, in particular, the recommendations relating to the application and end-use of
Sika products, are given in good faith based on Sika’s current knowledge and experience of the
product when properly stored, handled and applied under normal conditions in accordances with
Sika’s recommendations. In practice, the differences in materials, substrates and actual site
conditions are such that no warranty in respect of merchantability or of fitness for a particular
purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from
this information, or from any written recommendations, or from any other advice offered. The user of
the product must test the product’s suitability for the intended application and purpose. Sika reserves
the right to change the properties of its products. The proprietary rights of third parties must be
observed. All orders are accepted subject to our current terms of sale and delivery. Users must
always refer to the most recent issue of the local Product Data Sheet for the product concerned,
copies of which will be supplied on request.

PT. Sika Indonesia Branches

Jl. Raya Cibinong- Bekasi km. 20 Surabaya :
Limusnunggal- Cileungsi Komp. Pergudangan Meiko Abadi III Blok B-52 & B-53, Ds. Gemurung,
Gedangan, Sidoarjo 61254
BOGOR 16820 - Indonesia
Tel : 031- 8911333; Fax : 031-8916333
Tel. +62 21 8230025 Medan :
Fax +62 21 8230026 Jl. Serbaguna (Simp. Jalan Veteran), Kompleks Pergudangan Brayan
Website : idn.sika.com Trade Center No. 34, Medan 20239
e-mail: sikacare@id.sika.com Tel : 844 6697, 844 6997 ; Fax : (061) 844 6698
Batam :
Jl. Laksamana Bintan, Komp. Bumi Riau Makmur Blok E No.3, Sungai Panas
Tel : (0778) 424928; Fax : (0778) 450189

3 Sika® FillerBoard-50 PE 3/3