Scribd
Upload
60 views3 pages

TW PDF

The document discusses tire and wheel components, removal and installation procedures, and inspection of the wheel and tire system. It describes removing and installing the wheel and tire, including jacking up the vehicle, removing nuts, and reinstalling. Tire inspection procedures are provided, such as checking tire size, wear, pressure, and damage. Wheel inspection includes checking runout, balance, and bearing.

Uploaded by

ahmedco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views3 pages

TW PDF

The document discusses tire and wheel components, removal and installation procedures, and inspection of the wheel and tire system. It describes removing and installing the wheel and tire, including jacking up the vehicle, removing nuts, and reinstalling. Tire inspection procedures are provided, such as checking tire size, wear, pressure, and damage. Wheel inspection includes checking runout, balance, and bearing.

Uploaded by

ahmedco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TO INDEX

SUSPENSION

TIRE AND WHEEL


WHEEL AND TIRE
COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TW-1
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TW-1
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TW-1
WHEEL AND TIRE SYSTEM
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TW-2

TW
TW–1 TIRE AND WHEEL - WHEEL AND TIRE

WHEEL AND TIRE


TIRE AND WHEEL
SUSPENSION

COMPONENTS

WHEEL AND TIRE

×5

T=103.0{1050}

TIGHTENING TORQUE [N*m{kgf*cm}]


C140922J01

REMOVAL
1. REMOVE WHEEL AND TIRE
(a) Remove the wheel cap S/A.
(b) Jack up the vehicle.
(c) Remove the 5 nut hubs.
(d) Remove the wheel disk.
TW
INSTALLATION
1. INSTALL WHEEL AND TIRE
(a) Install the wheel and the tire.
(b) Install the 5 nut hubs.
Torque: 103 N*m (1050 kgf*cm)
(c) Jack down the vehicle.
(d) Install the wheel cap S/A.
TIRE AND WHEEL - WHEEL AND TIRE SYSTEM
TW–2

WHEEL AND TIRE SYSTEM


TIRE AND WHEEL
SUSPENSION

INSPECTION
1. CHECK TIRE
(a) Check for a size and wear.
(b) Check for cracks and damage.
(c) Check the tire pressure.
Standard

Tire Pressure (Front Tire Pressure (Rear


Tire Size Wheels) Wheels)
kPa (kgf/cm2) kPa (kgf/cm2)
215/65R16 2.0 2.0
235/60R16 2.1 2.1

(d) Check for modification of the suspension and damage to any


parts of the wheel.
(e) Check the tire runout.
Maximum tire runout:
1.4 mm (vertical)
2.0 mm (horizontal)
HINT:
Remove the wheel assembly from the vehicle, and measure the
runout of the wheel assembly when it is off the vehicle.
(f) Check that the bolts on the wheel-related parts are properly
tightened.
C050798J01 (g) Check the related parts for looseness.

2. ROTATE TIRE
(a) Rotate the tires as shown in the illustration.
Front

G023600J01

3. CHECK WHEEL BALANCE


(a) Check the wheel balance (off-the-car balance).
(b) Adjust the wheel balance (off-the-car balance).
Imbalance after adjustment:
11 g or less
(c) If tire vibration occurs even after adjusting the off-the-car TW
balance, adjust the on-the-car balance.

4. CHECK FRONT AXLE HUB BEARING

C080976J01

TO INDEX TO NEXT SECTION

You might also like