®

FH230 Series Fuel Pro

Diesel Fuel Filtration System

FUEL
Easiest to Maintain
■■ Patented Seeing is Believing® technology –
see when NOT to change the filter
■■ Five minute, NO MESS filter change
Filter Seeing is ■■ Low restriction check valve eliminates loss of
Element Believing® fuel prime when draining or changing filter
Cover
■■ Supports extended service intervals
■■ Water-In-Fuel (WIF) sensor available
■■ Easy priming at service

Highest Performing
■■ Best fuel water separation available – with
proprietary StrataPore™ media
■■ Reduced restriction to flow
■■ Meets OEM efficiency requirements
Check
Valve
Most Versatile
■■ Reduces inventory and complexity
■■ Biodiesel compatible to ASTM D6751,
EN14214 fuel standards
■■ Available with or without heater

Suggested Markets
■■ Mining
Aluminum Drain ■■ Construction
Construction Valve ■■ Agriculture
■■ Heavy Duty On-Highway
■■ Oil and Gas
■■ Power Generation
All-In-One
Fuel Filter, Water Separator and Fuel Heater

Housings Available Specifications

Housing Filter Micron Pre- Pre- Fluid WIF Specification Fuel Pro®
Part Element Rating Heater Heater Heat
Number ** *** 1 2 Height Overall 16.13" (409.7 mm)

120 Depth Overall 7.25" (184.15 mm)

FH23027 FS19763 7 12 VDC Yes No
VAC Width, max 6.89" (175 mm)
120 Mount Bracket Centers 5.91" (150.11 mm)
FH23028 FS19763 7 24 VDC Yes No
VAC
Weight (Dry) 7.25 - 9.75 lbs (3.9 - 4.42 kg)
FH23029 FS19763 7 N/A N/A No No
Fuel Connection (Inlet) 1/2"-14 NPTF (M22 x 1.5)
FH23030 FS19729 50 N/A N/A No No
Fuel Connection (Outlet) 1/2"-14 NPTF (M22 x 1.5)
FH23031 FS19763 7 12 VDC N/A No No
Fluid Heat Connection (Inlet) 1/2" NPTF (M22 x 1.5)
FH23032 FS19763 7 24 VDC N/A No No
Fluid Heat Connection (Outlet) 1/2" NPTF (M22 x 1.5)
FH23038 FS19763 7 N/A N/A Yes No
Fuel Capacity (w/ filter) 64.2 oz (1.9 L)
FH23039 FS19763 7 N/A N/A Yes Yes
Operation Fuel Flow Rate 180 gal/hr (681 L/hr)
FH23040 FS19763 7 12 VDC N/A Yes No
Recommended Applications Heavy Duty Engines
FH23041 FS19763 7 12 VDC N/A Yes Yes
Water Trap Capacity 33.8 fl oz (1.0 L)
FH23042 FS19763 7 24 VDC N/A Yes No
Filter Service Clearance Min. 1.5" (38.1 mm)
FH23045 FS19763 7 120 VAC N/A Yes No
12 VDC, 250 W, 18 A ± 3 A
FH23049 FS19763 7 12 VDC N/A No Yes Electrical Heater 24 VDC, 250 W, 11 A ± 2 A
FH23050 FS19763 7 24 VDC N/A No Yes 120 VAC, 75 W, 0.65 A ± .1 A
120 Compatible for use with Diesel
FH23054 FS19763 7 12 VDC No No
VAC Fuel Types #1, Diesel #2, Kerosene,
FH23060 FS19765 25 N/A N/A No Yes Biodiesel, & JP8

FH23061 FS19763 7 N/A N/A No Yes

Specifications subject to change without notice
FH23067M* FS19765 25 24 VDC N/A No Yes
Ports
FH23068M* FS19765 25 N/A No Yes
Avail.
FH23069M* FS19765 25 24 VDC N/A Yes Yes
Typical Installation
Ports
FH23070 FS19762 20 N/A N/A No
Avail.
FH23076 FS19765 25 N/A N/A No No
120 Fuel
FH23081 FS19763 7 N/A Yes Yes
VAC Pro

* M designates metric connections of M22 x 1.5.

** For biofuels above B5, the following gasket pack must be used Injection
to replace the standard gaskets that are provided with the filter Pump
element, 3950445 S.
*** 98.7% Efficiency
Lift
Note: Other filter options at different micron ratings are available. Pump
For details see Fleetguard Technical Information Catalog
(LT32599). Fuel flow for all part numbers: In Right/Out Left

Fuel Tank

For more detailed information, refer to the Fleetguard

Technical Information Catalog – LT32599 or
visit Fleetschool at cumminsfiltration.com. To
find the nearest retailer of Fleetguard products, visit
cumminsfiltration.com/wrl.

For more information, visit

cumminsfiltration.com
Connect with us online:
LT32559NA - Rev 2
©2010 Cummins Filtration Inc.
Printed in USA on Recycled Paper