168

HINGES

SPRING HINGE (DOUBLE ACTION) DA

●Opens in both directions inside and outside.
Passed 500,000 open/
close private cycle test ●Spring loaded for self-closing.
●Spring tension adjustable with three steps with a hex key.
●Opening angle is 180°.
●All parts including shaft and spring made of stainless steel (SUS304).

[Relationship Between Door Height and Door Weight]

TORQUE DA120 DA180
HINGES Recommended Door Height 1800~2500 mm
Min. Door Height 500 mm 800 mm
DAMPER Door Height: Max. 1800mm
Door Weight
HINGES Reduce by 1.1 kg for lowering 100mm each time. Reduce by 2.1kg for lowering 100mm each time.

[Remarks]
LIFT
ASSIST ●In case of noise, apply lubricant (grease) to washer and torsion spring.
HINGES Weight Weight
W 100 kg 100 kg
P1 ID 90 90
DETENT
80 80
HINGES
30 30 15
70 70
18
0° 60 60
50 50
CONCEALED

120
40 40
HINGES 30
3 Hinges
30
3 Hinges
15 30

20 20
0° 2 Hinges
10 10
BUTT 18 0
2 Hinges
P2 0
HINGES 60 70 80 90 100 cm 60 70 80 90 100 cm
8×Id1 Id2
Width Width

PIANO DA120-5404 DA120-5414

t
HINGES Weight Weight
W1 W2 W1 100 kg 100 kg
DA120 90 90
Hinges for double action door. 80 80
STEP
HINGES 70 70
[Installation] W 60 60
3 Hinges
P1 ID 50 50
3 Hinges
LIFT- ① ② 40 40
22.5

OFF 30 30
HINGES 2 Hinges
20 20
2 Hinges
45

10 10
0 0
PIVOT 60 70 80 90 100 cm 60 70 80 90 100 cm
180

HINGES
45

Width Width
DA180-5904 DA180-5914
45

SPRING Weight
HINGES 100 kg
22.5

Max. Door
Thickness
90
80
CLEAN t P2
70
ROOM 8×Id1 Id 2
60
HINGES 50
40
t

3 Hinges
HINGES FOR 30
③ ④ W1 W2 W1
ALUMINIUM 20
2 Hinges
FRAME DA180 10
0
[How to Adjust Spring Tension] 60 70 80 90 100 cm
DROP Width
HINGES ●Figure below shows the case of
left-hanging. DA180-5934

GLASS Hex. Hole 5mm Spring tension

DOOR
Low High
HINGES
Middle
SPECIAL Door Door
HINGES

Frame Frame

Pin Hole

Loosen shaft with a hex key and Adjust spring tension with three steps. Put
remove the pin. the pin to the hole and fix.

Max. Door Opening Weight Box

RoHS CAD Item Code Item Name Material Finish W W1 W2 P1 P2 D t d1 d2 Screw
Thickness Angle (g) (pcs)
170-090-803 DA120-5404-01 101 29.5 42 6.5 11.5 30 275 2
Aluminium Alloy Anodised 16 4 5.3 10 –
170-090-804 DA120-5414-01 40 320 2
133 40 53 11 16
170-090-805 DA120-5414-05 Stainless Steel (SUS304) Plain 17 2.5 5.5 9 36 Countersunk Head Tapping Screw 555 2
170-090-806 DA180-5904-01 101 29.5 42 6.5 11.5 30 180° 407 2
Aluminium Alloy Anodised 16 4 5.3 10 –
170-090-807 DA180-5914-01 40 466 2
133 40 53 11 16
170-090-808 DA180-5914-05 Stainless Steel (SUS304) Plain 18 3 5.5 9 38 Countersunk Head 947 2
170-090-809 DA180-5934-01 Aluminium Alloy Anodised 157 48.5 60 19.5 24.5 16 4 5.3 10 50 Tapping Screw 510 2

Updated 2019.4.10