netIC
DIL-32 Communication-IC with Modbus Host Interface
Compact communication module for cost-efficient field devices
Fieldbus and Real-Time Ethernet as Slave
Modbus RTU protocol via SPI or UART to the host
Real-Time Ethernet
One hardware for all Real-Time Ethernet protocols
Firmware update via integrated Webserver
Fieldbus
One design for all networks due to consistent interfaces
Slave solution for simple field devices
Simple field devices such as barcode readers, identification system, valve islands or I/O blocks
will require a connection to Fieldbus or Real-Time Ethernet systems. Since these devices do
not have a high data throughput, the netIC uses a serial connection such as UART and SPI as host interface.
The netIC is a complete ‘Single Chip Module’ in the compact dimensions of a Dual-In-Line (DIL) 32 pin plugin
module. It is based on the network controller netX and contains all components of a Fieldbus or Real-Time
Ethernet interface with integrated 2-port switch and hub. With the netX technology the whole spectrum of relevant
Fieldbus and Real-Time Ethernet systems is covered by loadable Firmware with one netIC. The user data
is transferred with simple read-write commands to the application via the above mentioned serial interfaces.
As serial protocol the well known Modbus RTU protocol is used.
Alternatively conventional shifting registers can be controlled via a synchronous serial interface
so no additional processor for a simple I/O-Device is required.
DIL-32 Communication-IC with Modbus Host Interface
Direct I/O data transfer
Slav
e Same Function - Same API - Same Tools netIC allows the direct connection of I/O data via con-
ve Master
Sla
ventional shift registers. This is beneficial for compact
r
ste
DPM
NIC 10-CCS and simple field devices, since a product design can
SPI
DPM
be realized without a host processor. The shifting
I
SP
Ie )
PC RTs RTU The Hilscher Platform Strategy provides the whole range of
-
same
To UAodbu direction as well as the refresh cycle of the data can
Slav
(M
SPbuIs RTU) communication solutions to the user – from standardized PC
o
easily be configured using a graphical tool.
ls
(Mod
I
same AP
cards up to the integration of the multi-protocol chip netX. All
ne tX SPI
(netPROXY)
Core solutions – whether Master or Slave – have the same interface
-
gy
Technolo
DPM to the application and use the same tools.
sa
- m
e
D ri
ver
SP NIC 50-COS
SP
I After single integration of the application interface the change
I
Sla
Integrated Webserver
DP
ve
to a different hardware format or a different physical host
DP
SPI
M
interface is a purely hardware optimization process without
Slave
fundamental changes of the software structure.
The major Real-Time Ethernet protocols always
include a Webserver and FTP server. This allows
NIC 50-DNS
the user an easy and central firmware update as well
Real-Time Ethernet & Fieldbus protocols as IP configuration. Furthermore, I/O data from the
Modbus registers can be dynamically displayed and
written. User and password administration will be
done during the installation process using a graphi-
cal configuration tool.
As specialist for industrial communication Hilscher
offers the largest selection of protocols used in the NIC 52-RE
factory automation. Besides traditional Fieldbus all
major Real-Time Ethernet protocols are available.
Graphical configuration tool
NIC 50-DPS Commissioning and configuration of netIC is
Modbus Host Interface done quick and easy by an intuitive configu-
ration tool. With this tool the user defines the
behaviour of the Fieldbus, the Modbus host
For a quick and easy integration the Hilscher netIC uses the well- interface, the shift registers as well as the basic
known Modbus protocol as application interface. Thereby it can settings of the Web and FTP Server.
either be deployed as Modbus RTU Slave or as Modbus RTU Master
on the serial bus – or netIC gets connected as SPI slave device.
NIC 52-REFO
Technical Data /
Product Overview
Parameter Value Parameter Value
Technical Data
Processor netX 10 / netX 50 / netX 52 Operating temperature - 20 ... +70 °C
Communication 2x Ethernet 100 BASE-TX Operating voltage +3.3 V / typ 400 mA
Interface CANopen / DeviceNet / CC-Link / PROFIBUS
Technical Data
Dimensions 42 x 21 x 14,2 mm (without Pins)
SSIO Interface Inputs max. 256 x 8 bit shift register (L x W x H) 42 x 21 x 17,2 mm (with Pins)
Outputs max. 256 x 8 bit shift register
CE Sign yes
System Interface Modbus RTU via UART (Master/Slave)
max. 115.2 KBit/s RoHS yes
Modbus RTU via SPI (Slave)
max. 102 KBit/s Product Name Brief Description
Evaluation
Displays System LED (on netIC) NICEB-RE netIC Evaluationboard for Real-Time Ethernet
COM LED (on basic design)
NICEB-FB netIC Evaluationboard for Fieldbus
Diagnosis UART (RXD, TXD)
max. 5 MBit/s NICEB-REFO netIC Evaluationboard Fiber Optic
Function upgrade NIC 52-RE & NIC 52-REFO
Especially for the growing demands of Real-Time Ethernet Hilscher offers with NIC 52-RE and NIC 52-REFO
a new netIC hardware with enhanced performance. It is based on the netX 52 multi-protocol network controller
and allows an operating temperature up to 70 °C - just without heat sink.
Significantly reduced height
Increased performance for high network load
Ready for PROFINET 2.3 certification
Pin & function compatibel
ia
ia
sv
RT s v
SP dbu
UA dbu
e l
tik
Mo
Mo
I
Ar
netIC 10
NIC 10 - - - - - - - - - - -
netIC 50
NIC 50 - - - - - - - - -
netIC 52
NIC 52 - - - -
Note: Technical data may be changed without further notice.
Headquarters Subsidiaries
Germany China India Japan Switzerland
Hilscher Gesellschaft für Hilscher Systemautomation Hilscher India Pvt. Ltd. Hilscher Japan KK Hilscher Swiss GmbH
Systemautomation mbH (Shanghai) Co. Ltd. Pune, Mumbai Tokyo, 160-0022 4500 Solothurn
Rheinstrasse 15 200010 Shanghai Phone: +91 8888 750 777 Phone: +81 (0) 3-5362-0521 Phone: +41 (0) 32 623 6633
65795 Hattersheim Phone: +86 (0) 21-6355-5161 E-Mail: info@hilscher.in E-Mail: info@hilscher.jp E-Mail: info@hilscher.ch
Phone: +49 (0) 6190 9907-0 E-Mail: info@hilscher.cn
Fax: +49 (0) 6190 9907-50
E-Mail: info@hilscher.com France Italy Korea USA
10/2018 GB
Web: www.hilscher.com Hilscher France S.a.r.l. Hilscher Italia S.r.l. Hilscher Korea Inc. Hilscher North America, Inc.
69800 Saint Priest 20090 Vimodrone (MI) Seongnam, Gyeonggi, 463-400 Lisle, IL 60532
Phone: +33 (0) 4 72 37 98 40 Phone: +39 02 25007068 Phone: +82 (0) 31-789-3715 Phone: +1 630-505-5301
Distributors E-Mail: info@hilscher.fr E-Mail: info@hilscher.it E-Mail: info@hilscher.kr E-Mail: info@hilscher.us
More information at www.hilscher.com
