Scribd
Upload
37 views1 page

Isometric Drawing: General Notes

This document provides general notes for an isometric drawing of plumbing works. It specifies that all plumbing works must comply with relevant codes and regulations. Pipes must be installed as indicated in plans but can be relocated with prior approval. The contractor must verify existing utilities on site and coordinate works with sewer and water connections. Pipe sizes are in millimeters and dimensions in meters unless otherwise specified.

Uploaded by

Pamela Lenon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views1 page

Isometric Drawing: General Notes

This document provides general notes for an isometric drawing of plumbing works. It specifies that all plumbing works must comply with relevant codes and regulations. Pipes must be installed as indicated in plans but can be relocated with prior approval. The contractor must verify existing utilities on site and coordinate works with sewer and water connections. Pipe sizes are in millimeters and dimensions in meters unless otherwise specified.

Uploaded by

Pamela Lenon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ISOMETRIC DRAWING

SCALE NTS

GENERAL NOTES:

1. ALL PLUMBING WORKS INCLUDED 5. ALL SLOPES FOR HORIZONTAL


HEREIN SHALL BE EXECUTED DRAINAGE SHALL BE MAINTAIN
ACCORDING TO THE PROVISION ONE PERCENT(1%) UNLESS
OF THE PHILIPPINE PLUMBING OTHERWISE SPECIFIED.
CODE. THE NATIONAL BUILDING
CODE AND THE RULES AND 6. SIZE OF WATER SUPPLY PIPES
REGULATIONS OF THE LOCALITY TO THE FIXTURES SHALL BE IN
ACCORDANCE WITH THE
2. COORDINATE THE DRAWINGS MANUFACTURE'S
WITH OTHER RELATED INSTRUCTUTIONS.
DRAWINGS AND SPECIFICATIONS.
THE ENGINEER SHALL BE 7. THE CONTRACTOR BE VERIFY
NOTIFIED IMMEDIETLY FOR ANY ALL EXISTING UTILITIES AT SITE
DISCREPANCY FOUND HEREIN. AND COORDINATE THE WORKS
WITH THE SEWER EFFLUENT
3. ALL PIPES SHALL BE INSTALLED DISPOSAL POINT AND WATER
AS INDICATED ON PLANS , ANY LINE SERVICE CONNECTING
RELOCATION REQUIRED FOR POINT.
PROPER EXECUTION OF OTHER
TRADES SHALL BE WITH PRIOR 8. ALL PIPE SIZES ARE IN
APPROVAL OF THE ARCHITECT MILIMETERS AND ALL
OR ENGINEER. DIMENSIONS ARE IN METER
. UNLESS OTHERWISE SPECIFIED.
4. PROPOSED SANITARY UTILITIES
SHALL CONFORM TO THE
ACTUAL LOCATION, DEPTH
AND INVERT ELEVATION OF
ALL EXISTING PIPES AND
STRUCTURES AS VERIFIED BY
THE CONTRACTOR.

DETAILS OF SEPTIC TANK


SCALE 1:25 MTS

You might also like