Scribd
Upload
152 views34 pages

S6R Series - Cooling System

The document provides instructions for installing a vehicle's cooling system. It states to install parts in reverse order of disassembly, clean the coolant passages, apply silicone sealant to connections between air cooler and water pipes, and tighten the water pump and sea water pump mounting nuts to specified torques.

Uploaded by

Hai Van
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
152 views34 pages

S6R Series - Cooling System

The document provides instructions for installing a vehicle's cooling system. It states to install parts in reverse order of disassembly, clean the coolant passages, apply silicone sealant to connections between air cooler and water pipes, and tighten the water pump and sea water pump mounting nuts to specified torques.

Uploaded by

Hai Van
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 34

Chapter 10 COOLING SYSTEM

1. Cooling System - Remove and Inspect ............................................................... 10-3

2. Cooling System - Disassemble, Inspect and Assemble .................................... 10-7

3. Cooling System - Install ...................................................................................... 10-35


Chapter 10 COOLING SYSTEM
Chapter 10 COOLING SYSTEM

3. Cooling System - Install


Install the parts in the reverse order of the disassemble sequence. (Refer to the illustration for disassembling.)
Clean and dry well the coolant passage.
3.1 Water Pipe (Air Cooler) - Install
Apply silicone sealant to the both sides of packings between
air cooler in/out connectors and water pipes.
3.2 Water Pump and Sea Water Pump - Install
Tighten the mounting nuts to the specified torque.

59 ± 5.9 N·m
{6 ± 0.6 kgf·m}
[43.5 ± 4.35 lbf·ft]

Water Pump - Install

Rear plate
18.6 ± 2.95 N·m
{1.9 ± 0.3 kgf·m}
[13.7 ± 2.2 lbf·ft]

Sea Water Pump - Install

10-35

You might also like